8,996 research outputs found
The Essential Role and the Continuous Evolution of Modulation Techniques for Voltage-Source Inverters in the Past, Present, and Future Power Electronics
The cost reduction of power-electronic devices, the increase in their reliability, efficiency, and power capability, and lower development times, together with more demanding application requirements, has driven the development of several new inverter topologies recently introduced in the industry, particularly medium-voltage converters. New more complex inverter topologies and new application fields come along with additional control challenges, such as voltage imbalances, power-quality issues, higher efficiency needs, and fault-tolerant operation, which necessarily requires the parallel development of modulation schemes. Therefore, recently, there have been significant advances in the field of modulation of dc/ac converters, which conceptually has been dominated during the last several decades almost exclusively by classic pulse-width modulation (PWM) methods. This paper aims to concentrate and discuss the latest developments on this exciting technology, to provide insight on where the state-of-the-art stands today, and analyze the trends and challenges driving its future
Conventional Space-Vector Modulation Techniques versus the Single-Phase Modulator for Multilevel Converters
Space-vector modulation is a well-suited technique
to be applied to multilevel converters and is an important
research focus in the last 25 years. Recently, a single-phase
multilevel modulator has been introduced showing its conceptual
simplicity and its very low computational cost. In this paper,
some of the most conventional multilevel space-vector modulation
techniques have been chosen to compare their results with those
obtained with single-phase multilevel modulators. The obtained
results demonstrate that the single-phase multilevel modulators
applied to each phase are equivalent with the chosen wellknown
multilevel space-vector modulation techniques. In this
way, single-phase multilevel modulators can be applied to a
converter with any number of levels and phases avoiding the
use of conceptually and mathematically complex space-vector
modulation strategies. Analytical calculations and experimental
results are shown validating the proposed concepts
Multilevel Converters: An Enabling Technology for High-Power Applications
| Multilevel converters are considered today as the
state-of-the-art power-conversion systems for high-power and
power-quality demanding applications. This paper presents a
tutorial on this technology, covering the operating principle and
the different power circuit topologies, modulation methods,
technical issues and industry applications. Special attention is
given to established technology already found in industry with
more in-depth and self-contained information, while recent
advances and state-of-the-art contributions are addressed with
useful references. This paper serves as an introduction to the
subject for the not-familiarized reader, as well as an update or
reference for academics and practicing engineers working in
the field of industrial and power electronics.Ministerio de Ciencia y Tecnología DPI2001-3089Ministerio de Eduación y Ciencia d TEC2006-0386
Feed-forward Space Vector Modulation for Single-Phase Multilevel Cascade Converters with any DC voltage ratio
Modulation techniques for multilevel converters
can create distorted output voltages and currents if the DC link
voltages are unbalanced. This situation can be avoided if the
instantaneous DC voltage error is not taken into account in the
modulation process. This paper proposes a feed-forward space
vector modulation method for a single-phase multilevel cascade
converter. Using this modulation technique, the modulated output
voltage of the power converter always generates the reference
determined by the controller even in worst case voltage unbalance
conditions. In addition the possibility of optimizing the DC
voltage ratio between the H-bridges of the power converter is
introduced. Experimental results from a 5kVA prototype are
presented in order to validate the proposed modulation technique
Space Vector Modulation Techniques for Multilevel Converters – a survey
This paper presents a survey of most recent,
simple and efficient Space Vector Modulation algorithms
for multilevel converters. These algorithms avoid
trigonometric and other complex operations, leading to
more simple and cost efficient implementations. They can be
applied to multilevel topologies and present freedom degrees
that can be Exploited in order to optimize system
parameters in the system like: capacitors voltages balancing
or voltage/current ripples. Experimental results are
presented to show the good performance of the algorithms
Generic closed loop controller for power regulation in dual active bridge DC-DC converter with current stress minimization
This paper presents a comprehensive and generalized analysis of the bidirectional dual active bridge (DAB) DC/DC converter using triple phase shift (TPS) control to enable closed loop power regulation while minimizing current stress. The key new achievements are: a generic analysis in terms of possible conversion ratios/converter voltage gains (i.e. Buck/Boost/Unity), per unit based equations regardless of DAB ratings, and a new simple closed loop controller implementable in real time to meet desired power transfer regulation at minimum current stress. Per unit based analytical expressions are derived for converter AC RMS current as well as power transferred. An offline particle swarm optimization (PSO) method is used to obtain an extensive set of TPS ratios for minimizing the RMS current in the entire bidirectional power range of - 1 to 1 per unit. The extensive set of results achieved from PSO presents a generic data pool which is carefully analyzed to derive simple useful relations. Such relations enabled a generic closed loop controller design that can be implemented in real time avoiding the extensive computational capacity that iterative optimization techniques require. A detailed Simulink DAB switching model is used to validate precision of the proposed closed loop controller under various operating conditions. An experimental prototype also substantiates the results achieved
Input current shaped ac-to-dc converters
Input current shaping techniques for ac-to-dc converters were investigated. Input frequencies much higher than normal, up to 20 kHz were emphasized. Several methods of shaping the input current waveform in ac-to-dc converters were reviewed. The simplest method is the LC filter following the rectifier. The next simplest method is the resistor emulation approach in which the inductor size is determined by the converter switching frequency and not by the line input frequency. Other methods require complicated switch drive algorithms to construct the input current waveshape. For a high-frequency line input, on the order of 20 kHz, the simple LC cannot be discarded so peremptorily, since the inductor size can be compared with that for the resistor emulation method. In fact, since a dc regulator will normally be required after the filter anyway, the total component count is almost the same as for the resistor emulation method, in which the filter is effectively incorporated into the regulator
A novel space-vector algorithm for multilevel converters based on geometrical considerations using a new sequence control technique
his paper presents a fast and simple space vector modulation algorithm for voltage source multilevel converters for calculating the switching times and the space vectors using simple geometrical considerations. This method provides the nearest switching vectors sequence to the reference vector and calculates the on-state durations of the respective switching state vectors without involving trigonometric functions, look-up tables or coordinate system transformations which increase the computational load corresponding to the modulation of a multilevel converter. The low computational cost of the proposed method is always the same and it is independent of the number of levels of the converter. In addition, a new switching sequence control technique is presented for reducing the ripple of the DC-link voltage approximately in 66%
Online control of AC/AC converter based SHEPWM technique
Conventional online control of AC/AC converter controlled by the selective harmonic elimination pulse width modulation technique (SHEPWM) is based on storing the offline calculated switching angle values in a form of lookup table. Then the required switching pattern of certain modulation index (M) is searched through the lookup table. This methodology suffers from limited system flexibility. This paper introduces a novel implementation scheme based on real-time calculation of the required SHEPWM switching pattern with linear control of the fundamental voltage component magnitude based on curve fitting technique for the exact switching angle trajectories. The accuracy of the derived polynomials is evaluated by calculating converter performance parameters using the approximated switching angles solutions obtained from the introduced method and the exact switching angles solutions. Detail of the introduced methodology is presented. Simulation and experimental results have been carried out to confirm the validity of the introduced algorithm
Efficiency analysis of wide band-gap semiconductors for two-level and three-level power converters
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Power devices based on wide band-gap materials are emerging as alternatives to silicon-based devices. These new devices allow designing and building converters with fewer power losses, and are thus more highly efficient than traditional power converters. Among the wide band-gap materials in use, silicon carbide (SiC) and gallium nitride (GaN) devices are the most promising because of their excellent properties and commercial availability. This paper compares the losses produced in two-level and three-level power converters that use the aforementioned technologies. In addition, we assess the impact on the converter performance caused by the modulation technique. Simulation results under various operating points are reported and compared.Peer ReviewedPostprint (author's final draft
- …