Design and Analysis of Optical Interconnection Networks for Parallel Computation.

In this doctoral research, we propose several novel protocols and topologies for the interconnection of massively parallel processors. These new technologies achieve considerable improvements in system performance and structure simplicity. Currently, synchronous protocols are used in optical TDM buses. The major disadvantage of a synchronous protocol is the waste of packet slots. To offset this inherent drawback of synchronous TDM, a pipelined asynchronous TDM optical bus is proposed. The simulation results show that the performance of the proposed bus is significantly better than that of known pipelined synchronous TDM optical buses. Practically, the computation power of the plain TDM protocol is limited. Various extensions must be added to the system. In this research, a new pipelined optical TDM bus for implementing a linear array parallel computer architecture is proposed. The switches on the receiving segment of the bus can be dynamically controlled, which make the system highly reconfigurable. To build large and scalable systems, we need new network architectures that are suitable for optical interconnections. A new kind of reconfigurable bus called segmented bus is introduced to achieve reduced structure simplicity and increased concurrency. We show that parallel architectures based on segmented buses are versatile by showing that it can simulate parallel communication patterns supported by a wide variety of networks with small slowdown factors. New kinds of interconnection networks, the hypernetworks, have been proposed recently. Compared with point-to-point networks, they allow for increased resource-sharing and communication bandwidth utilization, and they are especially suitable for optical interconnects. One way to derive a hypernetwork is by finding the dual of a point-to-point network. Hypercube Q\sb{n}, where n is the dimension, is a very popular point-to-point network. It is interesting to construct hypernetworks from the dual Q\sbsp{n}{*} of hypercube of Q\sb{n}. In this research, the properties of Q\sbsp{n}{*} are investigated and a set of fundamental data communication algorithms for Q\sbsp{n}{*} are presented. The results indicate that the Q\sbsp{n}{*} hypernetwork is a useful and promising interconnection structure for high-performance parallel and distributed computing systems

Efficient parallel computation on multiprocessors with optical interconnection networks

This dissertation studies optical interconnection networks, their architecture, address schemes, and computation and communication capabilities. We focus on a simple but powerful optical interconnection network model - the Linear Array with Reconfigurable pipelined Bus System (LARPBS). We extend the LARPBS model to a simplified higher dimensional LAPRBS and provide a set of basic computation operations. We then study the following two groups of parallel computation problems on both one dimensional LARPBS\u27s as well as multi-dimensional LARPBS\u27s: parallel comparison problems, including sorting, merging, and selection; Boolean matrix multiplication, transitive closure and their applications to connected component problems. We implement an optimal sorting algorithm on an n-processor LARPBS. With this optimal sorting algorithm at disposal, we study the sorting problem for higher dimensional LARPBS\u27s and obtain the following results: • An optimal basic Columnsort algorithm on a 2D LARPBS. • Two optimal two-way merge sort algorithms on a 2D LARPBS. • An optimal multi-way merge sorting algorithm on a 2D LARPBS. • An optimal generalized column sort algorithm on a 2D LARPBS. • An optimal generalized column sort algorithm on a 3D LARPBS. • An optimal 5-phase sorting algorithm on a 3D LARPBS. Results for selection problems are as follows: • A constant time maximum-finding algorithm on an LARPBS. • An optimal maximum-finding algorithm on an LARPBS. • An O((log log n)2) time parallel selection algorithm on an LARPBS. • An O(k(log log n)2) time parallel multi-selection algorithm on an LARPBS. While studying the computation and communication properties of the LARPBS model, we find Boolean matrix multiplication and its applications to the graph are another set of problem that can be solved efficiently on the LARPBS. Following is a list of results we have obtained in this area. • A constant time Boolean matrix multiplication algorithm. • An O(log n)-time transitive closure algorithm. • An O(log n)-time connected components algorithm. • An O(log n)-time strongly connected components algorithm. The results provided in this dissertation show the strong computation and communication power of optical interconnection networks

Multiprocessing techniques for unmanned multifunctional satellites Final report,

Simulation of on-board multiprocessor for long lived unmanned space satellite contro

Simulations and Algorithms on Reconfigurable Meshes With Pipelined Optical Buses.

Recently, many models using reconfigurable optically pipelined buses have been proposed in the literature. A system with an optically pipelined bus uses optical waveguides, with unidirectional propagation and predictable delays, instead of electrical buses to transfer information among processors. These two properties enable synchronized concurrent access to an optical bus in a pipelined fashion. Combined with the abilities of the bus structure to broadcast and multicast, this architecture suits many communication-intensive applications. We establish the equivalence of three such one-dimensional optical models, namely the LARPBS, LPB, and POB. This implies an automatic translation of algorithms (without loss of speed or efficiency) among these models. In particular, since the LPB is the same as an LARPBS without the ability to segment its buses, their equivalence establishes reconfigurable delays (rather than segmenting ability) as the key to the power of optically pipelined models. We also present simulations for a number of two-dimensional optical models and establish that they possess the same complexity, so that any of these models can simulate a step of one of the other models in constant time with a polynomial increase in size. Specifically, we determine the complexity of three two-dimensional optical models (the PR-Mesh, APPBS, and AROB) to be the same as the well known LR-Mesh and the cycle-free LR-Mesh. We develop algorithms for the LARPBS and PR-Mesh that are more efficient than existing algorithms in part by exploiting the pipelining, segmenting, and multicasting characteristics of these models. We also consider the implications of certain physical constraints placed on the system by restricting the distance over which two processors are able to communicate. All algorithms developed for these models assume that a healthy system is available. We present some fundamental algorithms that are able to tolerate up to N/2 faults on an N-processor LARPBS. We then extend these results to apply to other algorithms in the areas of image processing and matrix operations

Semiconductor-based all-optical switching for optical time-division multiplexed networks

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2003.Includes bibliographical references.All-optical switching will likely be required for future optical networks operating at data rates which exceed electronic processing speeds. Switches utilizing nonlinearities in semiconductor optical amplifiers (SOA) are particularly attractive due to their compact size, low required switching energies, and high potential for integration. In this dissertation we investigate the practical application of such semiconductor-based all-optical switches in next-generation optical networks. We present both theoretical and experimental studies of SOA-based interferometric switches. A detailed numerical model for the dynamic response of an SOA to an intensity-modulated optical signal is described. The model is validated using novel pump-probe techniques to measure the time-domain response of an SOA subject to various levels of saturation. The model is then used to evaluate the performance of three common SOA-based interferometric all-optical switches. The use of SOAs in optical transmission systems has been limited due to the deleterious effects of pattern-dependent gain saturation. We develop a statistical model to study the system impact of variations of the SOA optical gain in response to a random intensity-modulated optical signal. We propose the use of pulse-position modulation (PPM) as a means for mitigating gain saturation effects in SOA-based optical processors. We present techniques for modulation and detection of optical PPM signals at data rates in excess of 100 Gbit/s. We demonstrate demultiplexing, wavelength conversion, and format conversion of optical PPM signals at data rates as high as 80 Gbit/s. Finally, we report on experimental demonstrations of an optical interface for slotted OTDM networks.(cont.) We implement head-end and transmitter nodes capable of producing fully loaded optical slots at an aggregate network data rate of 112.5 Gbit/s. We demonstrate a fully functional receiver node which utilizes semiconductor-based all-optical logic for synchronization, address processing, and rate conversion.by Bryan S. Robinson.Ph.D

Space station data system analysis/architecture study. Task 2: Options development, DR-5. Volume 2: Design options

The primary objective of Task 2 is the development of an information base that will support the conduct of trade studies and provide sufficient data to make key design/programmatic decisions. This includes: (1) the establishment of option categories that are most likely to influence Space Station Data System (SSDS) definition; (2) the identification of preferred options in each category; and (3) the characterization of these options with respect to performance attributes, constraints, cost and risk. This volume contains the options development for the design category. This category comprises alternative structures, configurations and techniques that can be used to develop designs that are responsive to the SSDS requirements. The specific areas discussed are software, including data base management and distributed operating systems; system architecture, including fault tolerance and system growth/automation/autonomy and system interfaces; time management; and system security/privacy. Also discussed are space communications and local area networking

Application of advanced technology to space automation

Automated operations in space provide the key to optimized mission design and data acquisition at minimum cost for the future. The results of this study strongly accentuate this statement and should provide further incentive for immediate development of specific automtion technology as defined herein. Essential automation technology requirements were identified for future programs. The study was undertaken to address the future role of automation in the space program, the potential benefits to be derived, and the technology efforts that should be directed toward obtaining these benefits

Spacelab data management subsystem phase B study

The Spacelab data management system is described. The data management subsystem (DMS) integrates the avionics equipment into an operational system by providing the computations, logic, signal flow, and interfaces needed to effectively command, control, monitor, and check out the experiment and subsystem hardware. Also, the DMS collects/retrieves experiment data and other information by recording and by command of the data relay link to ground. The major elements of the DMS are the computer subsystem, data acquisition and distribution subsystem, controls and display subsystem, onboard checkout subsystem, and software. The results of the DMS portion of the Spacelab Phase B Concept Definition Study are analyzed