Critical Aspects of Electric Motor Drive Controllers and Mitigation of Torque Ripple - Review

Electric vehicles (EVs) are playing a vital role in sustainable transportation. It is estimated that by 2030, Battery EVs will become mainstream for passenger car transportation. Even though EVs are gaining interest in sustainable transportation, the future of EV power transmission is facing vital concerns and open research challenges. Considering the case of torque ripple mitigation and improved reliability control techniques in motors, many motor drive control algorithms fail to provide efficient control. To efficiently address this issue, control techniques such as Field Orientation Control (FOC), Direct Torque Control (DTC), Model Predictive Control (MPC), Sliding Mode Control (SMC), and Intelligent Control (IC) techniques are used in the motor drive control algorithms. This literature survey exclusively compares the various advanced control techniques for conventionally used EV motors such as Permanent Magnet Synchronous Motor (PMSM), Brushless Direct Current Motor (BLDC), Switched Reluctance Motor (SRM), and Induction Motors (IM). Furthermore, this paper discusses the EV-motors history, types of EVmotors, EV-motor drives powertrain mathematical modelling, and design procedure of EV-motors. The hardware results have also been compared with different control techniques for BLDC and SRM hub motors. Future direction towards the design of EV by critical selection of motors and their control techniques to minimize the torque ripple and other research opportunities to enhance the performance of EVs are also presented.publishedVersio

Fuzzy logic based efficiency optimization of IPM synchronous motor drive

Interior permanent magnet synchronous motor (IPMSM) is highly appreciated by researchers in variable speed drive applications due to some of its advantageous features such as small size, high power density, simple maintenance, high output torque, high power factor, low noise and robustness as compared to the conventional IM and other ac motors. Although these motor drives are well known for their relatively high efficiency, improvement margins still exist in their operating efficiency. Particularly, the reduction of power loss for IPMSM still remains a challenge for researchers. Improvement of motor drives efficiency is important not only from the viewpoints of energy loss and hence cost saving, but also from the perspective of environmental pollution. The thesis presents development of a fuzzy logic based efficiency and speed control system of an IPMSM drive. In order to maximize the efficiency in steady state operation while meeting the speed and load torque demands a search based fuzzy efficiency controller is designed to minimize the drive power losses to achieve higher efficiency by reducing the flux. The air gap flux level can be reduced by controlling the d-axis armature current as it is supplied by rotor permanent magnet. In order for the drive to track the reference speed in transient operation another fuzzy logic based controller is designed to increase the flux depending on the speed error and its derivative. The torque component of stator current (q-axis component of stator current) is generated by fuzzy logic based speed controller for different dynamic operation depending on speed error and its derivative. In this work a torque compensation algorithm is also introduced to reduce the torque and speed fluctuations

Urban and extra-urban hybrid vehicles: a technological review

Pollution derived from transportation systems is a worldwide, timelier issue than ever. The abatement actions of harmful substances in the air are on the agenda and they are necessary today to safeguard our welfare and that of the planet. Environmental pollution in large cities is approximately 20% due to the transportation system. In addition, private traffic contributes greatly to city pollution. Further, “vehicle operating life” is most often exceeded and vehicle emissions do not comply with European antipollution standards. It becomes mandatory to find a solution that respects the environment and, realize an appropriate transportation service to the customers. New technologies related to hybrid –electric engines are making great strides in reducing emissions, and the funds allocated by public authorities should be addressed. In addition, the use (implementation) of new technologies is also convenient from an economic point of view. In fact, by implementing the use of hybrid vehicles, fuel consumption can be reduced. The different hybrid configurations presented refer to such a series architecture, developed by the researchers and Research and Development groups. Regarding energy flows, different strategy logic or vehicle management units have been illustrated. Various configurations and vehicles were studied by simulating different driving cycles, both European approval and homologation and customer ones (typically municipal and university). The simulations have provided guidance on the optimal proposed configuration and information on the component to be used

Serangga dan mitos suku kaum jakun, Kampung Peta, Mersing Johor

This study focuses on seeing insects from the mythical perspective of the Orang Asli tribe of Jakun, Kampung Peta, Mersing Johor. The existence of insects in the life of every ethnic in Malaysia has brought various elements of myths. Therefore, when combining myths and insects, it could be said that myth is a human way of understanding, expressing and linking insects to him/herself as well as a group/culture. The practice of using insects among ethnic groups in daily life is called etnoentomology. In this study, the insects studied are the butterfly (Lepidoptera), the odonates (Odonata) and the cicadas (Homoptera). This is because these insects are very popular in the community and have their own myths that are brought into the local culture of belief

Performance analysis of interior permanent magnet synchronous motor (IPMSM) drive system using different speed controllers

The present research is indicating that the Permanent magnet motor drive could become serious competitor to the induction motor drive for servo application. Further, with the evolution of permanent magnet materials and control technology, the Permanent Magnet Synchronous Motor (PMSM) has become a pronounced choice for low and mid power applications such as computer peripheral equipments, robotics, adjustable speed drives and electric vehicles due to its special features like high power density, high torque/inertia ratio, high operating efficiency, variable speed operation, reliability, and low cost etc. Here we deals with the detailed modeling of an IPMSM drive system with Hybrid PI-Fuzzy logic controller (PI-FLC) as speed controller and Adaptive Hysteresis Current Controller as torque controller by controlling the current components of torque.In this thesis we deals with a simulation for speed control and improvement in the performance of a closed loop vector controlled IPMSM drive which employ two loops for better speed tracking and fast dynamic response during transient as well as steady state conditions by controlling the torque component of current. The outer loop employ Hybrid PIFuzzy logic controller (PI-FLC) while inner loop as Adaptive Hysteresis Band Current Controller (AHBCC) designed to reduce the torque ripple. Despite proportional plus Integral (PI) controller are usually preferred as speed controller due to its fixed gain (Kp) and Integral time constant (Ki), the performance of PI controller are affected by parameters variations, speed change and load disturbances in PMSM, due to which it results to unsatisfied operation under transient conditions. The drawbacks of PI controller are minimized using fuzzy logic controller (FLC). So for this a fuzzy control technique is also designed using mamdani type, triangular based 5x5 MFs and selecting the superior functionalities of PI and FLC, a Hybrid PI-FLC designed for effective speed control under transient and steady state condition.The complete viability of above mentioned integrated control strategy is implemented and tested in the MATLAB/Simulink environment and a performance comparison of proposed drive system with conventional PI, fuzzy logic controller and Hybrid PI-Fuzzy Logic Controller integrated separately as speed controller in terms of steady state and transient analysis with fixed step, variable step load and variable speed condition has been presented. Beside this a detailed comparative study of AHBCC is also done with Conventional Hysteresis Current Control(CHCC) scheme. The simulation circuits parameters for IPMSM, inverter, speed and current controllers of the drive system are given in Appendix-A

A study of potential retroffiting existing Sultan Ibrahim heritage building to green building

Green building amount in Malaysia is still in small percentage compared to the other countries. Heritage buildings in one of the old buildings that preserved, carefully, but still not achieved sustainability because there are few factors that will become the barriers. This paper is to identify the potential and the barrier of retrofitting that Sultan Ibrahim building toward green building initiatives. All the information obtained is from the study of literature, distributing questionnaires, and preliminary interviews. The respondents were selected from green building experts, contractors, engineers, and Sultan Ibrahim Building’s staffs. The result of this study shows availability some components in Sultan Ibrahim Building that have potential retrofit and know how far the building availability for retrofit according to green building guideline. Moreover, there are some barriers had been analyzed may be happened during retrofitting Sultan Ibrahim building towards green building

Development and Implementation of Some Controllers for Performance Enhancement and Effective Utilization of Induction Motor Drive

The technological development in the field of power electronics and DSP technology is rapidly changing the aspect of drive technology. Implementations of advanced control strategies like field oriented control, linearization control, etc. to AC drives with variable voltage, and variable frequency source is possible because of the advent of high modulating frequency PWM inverters. The modeling complexity in the drive system and the subsequent requirement for modern control algorithms are being easily taken care by high computational power, low-cost DSP controllers. The present work is directed to study, design, development, and implementation of various controllers and their comparative evaluations to identify the proper controller for high-performance induction motor (IM) drives. The dynamic modeling for decoupling control of IM is developed by making the flux and torque decoupled. The simulation is carried out in the stationary reference frame with linearized control based on state-space linearization technique. Further, comprehensive and systematic design procedures are derived to tune the PI controllers for both electrical and mechanical subsystems. However, the PI-controller performance is not satisfactory under various disturbances and system uncertainties. Also, precise mathematical model, gain values, and continuous tuning are required for the controller design to obtain high performance. Thus, to overcome these drawbacks, an adapted control strategy based on Adaptive Neuro-Fuzzy Inference System (ANFIS) based controller is developed and implemented in real-time to validate different control strategies. The superiority of the proposed controller is analyzed and is contrasted with the conventional PI controller-based linearized IM drive. The simplified neuro-fuzzy control (NFC) integrates the concept of fuzzy logic and neural network structure like conventional NFC, but it has the advantages of simplicity and improved computational efficiency over conventional NFC as the single input introduced here is an error instead of two inputs error and change in error as in conventional NFC. This structure makes the proposed NFC robust and simple as compared to conventional NFC and thus, can be easily applied to real-time industrial applications. The proposed system incorporated with different control methods is also validated with extensive experimental results using DSP2812. The effectiveness of the proposed method using feedback linearization of IM drive is investigated in simulation as well as in experiment with different working modes. It is evident from the comparative results that the system performance is not deteriorated using proposed simplified NFC as compared to the conventional NFC, rather it shows superior performance over PI-controller-based drive. A hybrid fuel cell (FC) supply system to deliver the power demanded by the feedback linearization (FBL) based IM drive is designed and implemented. The modified simple hybrid neuro-fuzzy sliding-mode control (NFSMC) incorporated with the intuitive FBL substantially reduces torque chattering and improves speed response, giving optimal drive performance under system uncertainties and disturbances. This novel technique also has the benefit of reduced computational burden over conventional NFSMC and thus, suitable for real-time industrial applications. The parameters of the modified NFC is tuned by an adaptive mechanism based on sliding-mode control (SMC). A FC stack with a dc/dc boost converter is considered here as a separate external source during interruption of main supply for maintaining the supply to the motor drive control through the inverter, thereby reducing the burden and average rating of the inverter. A rechargeable battery used as an energy storage supplements the FC during different operating conditions of the drive system. The effectiveness of the proposed method using FC-based linearized IM drive is investigated in simulation, and the efficacy of the proposed controller is validated in real-time. It is evident from the results that the system provides optimal dynamic performance in terms of ripples, overshoot, and settling time responses and is robust in terms of parameters variation and external load

Efficiency optimal control of interior permanent magnet synchronous motor / by Fasil Abera.

There has been a growing concern over energy consumption since the past decade mainly because of the soaring cost of energy and tight environmental laws and regulations. In this thesis a model based efficiency optimization for speed control of interior permanent magnet synchronous motor (IPMSM) is proposed to improve the efficiency of the motor drive which usually operates at different load and speed conditions. Recently, the IPMSM has been becoming popular due to some of its advantages such as high efficiency, high power density, low noise and robustness as compared to the conventional induction and other ac motors. Thus, the IPMSM is considered in this work. The proposed energy optimization algorithm is developed based on motor model. In order to minimize the controllable losses, the air gap flux level should be optimized. In an LPMSM the flux level can only be optimized by controlling the d-axis armature current as the field flux is supplied by the rotor permanent magnet. For the proposed work the vector control technique is used in order to achieve fast and accurate speed response, quick recovery of speed from any disturbance and insensitivity to parameter variations etc. A simulation model for the complete closed loop vector control of IPMSM incorporating the proposed energy optimization algorithm has been developed using Matlab/Simulink software. The performance of the drive has been tested extensively for different dynamic operating conditions such as sudden load, command speed and parameter changes. An efficiency gain of about 4% is obtained from the proposed optimization algorithm from simulation. After the satisfactory simulation results are found a realtime implementation of the complete drive system using DSP board (DS1104) for a laboratory 5 hp motor performed and the real time responses confirms with the simulation results as expected

Online loss minimization based direct torque and flux control of IPMSM drive

With the advent of high energy rare earth magnetic material such as, third generation neodymium-iron-boron (NdFeB), permanent magnet synchronous motor (PMSM) is becoming more and more popular in high power industrial applications (e.g., high-speed railway) due to its advantageous features such as high energy density, stable parameters, high power factor, low noise and high efficiency as compared to the conventional ac motors. Over the years, vector control and direct torque and flux control (DTFC) techniques have been used for high performance motor drives. But, the DTFC is faster than that of conventional vector control as the DTFC scheme doesn't need any coordinate transformation, pulse width modulation (PWM) and current regulators. The DTFC utilizes hysteresis band comparators for both flux and torque controls. Most of the past researches on DTFC based motor drives mainly concentrated on the development of the inverter control algorithm with less torque ripple as it is the major drawback of DTFC. The torque reference value is obtained online based on motor speed error between actual and reference values through a speed controller. Traditionally, researchers chose a constant value of air-gap flux reference based on trial and error method which may not be acceptable for high performance drives as the air-gap flux changes with operating conditions and system disturbance. Efficient high performance drives require fast and accurate speed response to cope with disturbances and algorithm to minimize motor losses. However, if the reference air-gap flux is maintained constant it is not possible to control the motor losses. Therefore, this thesis presents a novel loss minimization based DTFC scheme for interior type PMSM drive so that the drive system can maintain both high efficiency and high dynamic performance. An online model based loss minimization algorithm (LMA) is developed to estimate the air-gap flux so that the motor operates at minimum loss condition while taking the general advantages of DTFC over conventional vector control. The performance the proposed LMA based DTFC for PMSM drive is tested in both simulation and real-time implementation at different operating conditions. The results verify the effectiveness of the proposed flux observer based DTFC scheme for PMSM drive