Intelligent controllers for velocity tracking of two wheeled inverted pendulum mobile robot

Velocity tracking is one of the important objectives of vehicle, machines and mobile robots. A two wheeled inverted pendulum (TWIP) is a class of mobile robot that is open loop unstable with high nonlinearities which makes it difficult to control its velocity because of its nature of pitch falling if left unattended. In this work, three soft computing techniques were proposed to track a desired velocity of the TWIP. Fuzzy Logic Control (FLC), Neural Network Inverse Model control (NN) and an Adaptive Neuro-Fuzzy Inference System (ANFIS) were designed and simulated on the TWIP model. All the three controllers have shown practically good performance in tracking the desired speed and keeping the robot in upright position and ANFIS has shown slightly better performance than FLC, while NN consumes more energy

A Fuzzy LQR PID Control for a Two-Legged Wheel Robot with Uncertainties and Variant Height

This paper proposes a fuzzy LQR PID control for a two-legged wheeled balancing robot for keeping stability against uncertainties and variant heights. The proposed control includes the fuzzy supervisor, LQR, PID, and two calibrations. The fuzzy LQR is conducted to control the stability and motion of the robot while its posture changes with respect to time. The fuzzy supervisor is used to adjust the LQR control according to the robotic height. It consists of one input and one output. The input and output have three membership functions, respectively, to three postures of the robot. The PID control is used to control the posture of the robot. The first calibration is used to compensate for the bias value of the tilting angle when the robot changes its posture. The second calibration is applied to compute the robotic height according to the hip angle. In order to verify the effectiveness of the proposed control, a practical robot with the variant height is constructed, and the proposed control is embedded in the control board. Finally, two experiments are also conducted to verify the balancing and moving ability of the robot with the variant posture

Comparative Study of Takagi-Sugeno-Kang and Madani Algorithms in Type-1 and Interval Type-2 Fuzzy Control for Self-Balancing Wheelchairs

This study examines the effectiveness of four different fuzzy logic controllers in self-balancing wheelchairs. The controllers under consideration are Type-1 Takagi-Sugeno-Kang (TSK) FLC, Interval Type-2 TSK FLC, Type-1 Mamdani FLC, and Interval Type-2 Mamdani FLC. A MATLAB-based simulation environment serves for the evaluation, focusing on key performance indicators like percentage overshoot, rise time, settling time, and displacement. Two testing methodologies were designed to simulate both ideal conditions and real-world hardware limitations. The simulations reveal distinct advantages for each controller type. For example, Type-1 TSK excels in minimizing overshoot but requires higher force. Interval Type-2 TSK shows the quickest settling times but needs the most force. Type-1 Mamdani has the fastest rise time with the lowest force requirement but experiences a higher percentage of overshoot. Interval Type-2 Mamdani offers balanced performance across all metrics. When a 2.7 N control input cap is imposed, Type-2 controllers prove notably more efficient in minimizing overshoot. These results offer valuable insights for future design and real-world application of self-balancing wheelchairs. Further studies are recommended for the empirical testing and refinement of these controllers, especially since the initial findings were limited to four-wheeled self-balancing robotic wheelchairs

Synchronizing of Stabilizing Platform Mounted on a Two-Wheeled Robot

This paper represents the designing, building, and testing of a self-stabilizing platform mounted on a self-balancing robot. For the self-stabilizing platform, a servo motor is used and for the self-balancing robot, two dc motors are used with an encoder, inertial measurement unit, motor driver, an Arduino UNO microcontroller board. A PID controller is used to control the balancing of the system. The PID controller gains (Kp, Ki, and Kd) were evaluated experimentally. The value of the tilted angle from IMU was fed to the PID controller to control the actuated motors for balancing the system. For the self-stabilizing control part, whenever the robot tilted, it maintained the horizontal position by rotating that much in the opposite direction

Wheelchair lifter

Basically, a wheelchair stair lift is a motorized, meaning by carrying a person seated in a wheelchair up and down stairs. A wheelchair lift, also known as a platform lift, or vertical platform lift is a fully powered device designed to raise a wheelchair and its occupant in order to overcome a step or similar vertical barrier (Figure 8.1). Wheelchair lifts can be installed in homes or businesses and are often added to both private and public vehicles in order to meet accessibility requirements laid out by the Americans with Disabilities Act of 1990 (ADA). These mobility devices are often installed in homes as an alternative to a stair lift, which only transport a passenger and not his/her wheelchair or mobility scooter. It is installed over the stairs in such a way that the stairs can still be used in the usual fashion. There is no need of breaking down or reconstructing the existing building

Improving a Wall-Following Robot Performance with a PID-Genetic Algorithm Controller

A wall-following robot needs a robust controller that navigate robot based on the specified distance from the wall. The usage of PID controller has been successfully minimizing the dynamic error of wall-following robot. However, a manual setting of three unknown parameters of PID-controller often precisely increase instability. Hence, recently there are many approaches to solve this issue. This paper presents an approach to obtaining those PID parameters automatically by utilizing the role of Genetic Algorithm. The proposed method was simulated using MATLAB and tested in a real robot. Based on several experiments results it has been showing the effectiveness of reducing the dynamic error of the wall-following robot