5,648 research outputs found
Single-RF spatial modulation requires single-carrier transmission: frequency-domain turbo equalization for dispersive channels
In this paper, we propose a broadband single-carrier (SC) spatial-modulation (SM) based multiple-input multipleoutput (MIMO) architecture relying on a soft-decision (SoD) frequency-domain equalization (FDE) receiver. We demonstrate that conventional orthogonal frequency-division multiplexing (OFDM)-based broadband transmissions are not readily suitable for the single–radio frequency (RF) assisted SM-MIMO schemes, since this scheme does not exhibit any substantial performance advantage over single-antenna transmissions. To circumvent this limitation, a low-complexity soft-decision (SoD) FDE algorithm based on the minimum mean-square error (MMSE) criterion is invoked for our broadband SC-based SM-MIMO scheme, which is capable of operating in a strongly dispersive channel having a long channel impulse response (CIR) at a moderate decoding complexity. Furthermore, our SoD FDE attains a near-capacity performance with the aid of a three-stage concatenated SC-based SM architecture
Multihop Diversity in Wideband OFDM Systems: The Impact of Spatial Reuse and Frequency Selectivity
The goal of this paper is to establish which practical routing schemes for
wireless networks are most suitable for wideband systems in the power-limited
regime, which is, for example, a practically relevant mode of operation for the
analysis of ultrawideband (UWB) mesh networks. For this purpose, we study the
tradeoff between energy efficiency and spectral efficiency (known as the
power-bandwidth tradeoff) in a wideband linear multihop network in which
transmissions employ orthogonal frequency-division multiplexing (OFDM)
modulation and are affected by quasi-static, frequency-selective fading.
Considering open-loop (fixed-rate) and closed-loop (rate-adaptive) multihop
relaying techniques, we characterize the impact of routing with spatial reuse
on the statistical properties of the end-to-end conditional mutual information
(conditioned on the specific values of the channel fading parameters and
therefore treated as a random variable) and on the energy and spectral
efficiency measures of the wideband regime. Our analysis particularly deals
with the convergence of these end-to-end performance measures in the case of
large number of hops, i.e., the phenomenon first observed in \cite{Oyman06b}
and named as ``multihop diversity''. Our results demonstrate the realizability
of the multihop diversity advantages in the case of routing with spatial reuse
for wideband OFDM systems under wireless channel effects such as path-loss and
quasi-static frequency-selective multipath fading.Comment: 6 pages, to be published in Proc. 2008 IEEE International Symposium
on Spread Spectrum Techniques and Applications (IEEE ISSSTA'08), Bologna,
Ital
Asynchronous CDMA Systems with Random Spreading-Part I: Fundamental Limits
Spectral efficiency for asynchronous code division multiple access (CDMA)
with random spreading is calculated in the large system limit allowing for
arbitrary chip waveforms and frequency-flat fading. Signal to interference and
noise ratios (SINRs) for suboptimal receivers, such as the linear minimum mean
square error (MMSE) detectors, are derived. The approach is general and
optionally allows even for statistics obtained by under-sampling the received
signal.
All performance measures are given as a function of the chip waveform and the
delay distribution of the users in the large system limit. It turns out that
synchronizing users on a chip level impairs performance for all chip waveforms
with bandwidth greater than the Nyquist bandwidth, e.g., positive roll-off
factors. For example, with the pulse shaping demanded in the UMTS standard,
user synchronization reduces spectral efficiency up to 12% at 10 dB normalized
signal-to-noise ratio. The benefits of asynchronism stem from the finding that
the excess bandwidth of chip waveforms actually spans additional dimensions in
signal space, if the users are de-synchronized on the chip-level. The analysis
of linear MMSE detectors shows that the limiting interference effects can be
decoupled both in the user domain and in the frequency domain such that the
concept of the effective interference spectral density arises. This generalizes
and refines Tse and Hanly's concept of effective interference.
In Part II, the analysis is extended to any linear detector that admits a
representation as multistage detector and guidelines for the design of low
complexity multistage detectors with universal weights are provided
Design guidelines for spatial modulation
A new class of low-complexity, yet energyefficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO) has emerged. These systems are capable of exploiting the spatial dimensions (i.e. the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication whilst relying on a single-Radio Frequency (RF) chain. Moreover, SM may also be viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/ cooperative protocol design issues, and on their meritorious variants
Unified Capacity Limit of Non-coherent Wideband Fading Channels
In non-coherent wideband fading channels where energy rather than spectrum is
the limiting resource, peaky and non-peaky signaling schemes have long been
considered species apart, as the first approaches asymptotically the capacity
of a wideband AWGN channel with the same average SNR, whereas the second
reaches a peak rate at some finite critical bandwidth and then falls to zero as
bandwidth grows to infinity. In this paper it is shown that this distinction is
in fact an artifact of the limited attention paid in the past to the product
between the bandwidth and the fraction of time it is in use. This fundamental
quantity, called bandwidth occupancy, measures average bandwidth usage over
time. For all signaling schemes with the same bandwidth occupancy, achievable
rates approach to the wideband AWGN capacity within the same gap as the
bandwidth occupancy approaches its critical value, and decrease to zero as the
occupancy goes to infinity. This unified analysis produces quantitative
closed-form expressions for the ideal bandwidth occupancy, recovers the
existing capacity results for (non-)peaky signaling schemes, and unveils a
trade-off between the accuracy of approximating capacity with a generalized
Taylor polynomial and the accuracy with which the optimal bandwidth occupancy
can be bounded.Comment: Accepted for publication in IEEE Transactions on Wireless
Communications. Copyright may be transferred without notic
- …