2,097 research outputs found
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
Initial synchronisation of wideband and UWB direct sequence systems: single- and multiple-antenna aided solutions
This survey guides the reader through the open literature on the principle of initial synchronisation in single-antenna-assisted single- and multi-carrier Code Division Multiple Access (CDMA) as well as Direct Sequence-Ultra WideBand (DS-UWB) systems, with special emphasis on the DownLink (DL). There is a paucity of up-to-date surveys and review articles on initial synchronization solutions for MIMO-aided and cooperative systems - even though there is a plethora of papers on both MIMOs and on cooperative systems, which assume perfect synchronization. Hence this paper aims to ?ll the related gap in the literature
Channel Dynamics and SNR Tracking in Millimeter Wave Cellular Systems
The millimeter wave (mmWave) frequencies are likely to play a significant
role in fifth-generation (5G) cellular systems. A key challenge in developing
systems in these bands is the potential for rapid channel dynamics: since
mmWave signals are blocked by many materials, small changes in the position or
orientation of the handset relative to objects in the environment can cause
large swings in the channel quality. This paper addresses the issue of tracking
the signal to noise ratio (SNR), which is an essential procedure for rate
prediction, handover and radio link failure detection. A simple method for
estimating the SNR from periodic synchronization signals is considered. The
method is then evaluated using real experiments in common blockage scenarios
combined with outdoor statistical models
Recommended from our members
Millimeter wave MIMO communications : high-resolution angle acquisition and low-resolution time-frequency synchronization
Knowledge of the propagation channel is critical to exploit the full benefit of multiple-input multiple-output (MIMO) techniques in millimeter wave (mmWave) cellular systems. Obtaining accurate channel state information in mmWave systems, however, is challenging due to high estimation overhead, high computational complexity and on-grid setting. It is also desirable to reduce the analog-to-digital converters (ADCs) resolution at mmWave frequencies to reduce power consumption and implementation costs. The use of low-precision ADCs, though, brings new design challenges to practical cellular networks.
In the first part of this dissertation, we develop several new methods to estimate and track the mmWave channel's angle-of-departure and angle-of-arrival with high accuracy and low overhead. The key ingredient of the proposed strategies is custom designed beam pairs, from which there exists an invertible function of the angle to be estimated. We further extend the proposed algorithms to dual-polarized MIMO in wideband channels, and angle tracking design for fast-varying environments. We derive analytical angle estimation error performance of the proposed methods in single-path channels. We also use numerical examples to characterize the robustness of the proposed approaches to various transceiver settings and channel conditions.
In the second part of this dissertation, we focus on improving the low-resolution time-frequency synchronization performance for mmWave cellular systems. In our system model, the base station uses analog beams to send the synchronization signal with infinite-resolution digital-to-analog converters (DACs). The user equipment employs a fully digital front end to detect the synchronization signal with low-resolution ADCs. For low-resolution timing synchronization, we propose a new multi-beam probing based strategy, targeting at maximizing the minimum received synchronization signal-to-quantization-plus-noise ratio among all serving users. Regarding low-resolution frequency synchronization, we construct new sequences for carrier frequency offset (CFO) estimation and compensation. We use both analytical and numerical examples to show that the proposed sequences and the corresponding metrics used for retrieving the CFOs are robust to the quantization distortion.Electrical and Computer Engineerin
- âŠ