Energy Optimization of Smart Water Systems using UAV Enabled Zero-Power Wireless Communication Networks

Real-time energy consumption is a crucial consideration when assessing the effectiveness and efficiency of communication using energy hungry devices. Utilizing new technologies such as UAV-enabled wireless powered communication networks (WPCN) and 3D beamforming, and then a combination of static and dynamic optimization methodologies are combined to improve energy usage in water distribution systems (WDS). A proposed static optimization technique termed the Dome packing method and dynamic optimization methods such as extremum seeking are employed to generate optimum placement and trajectories of the UAV with respect to the ground nodes (GN) in a WDS. In this thesis, a wireless communication network powered by a UAV serves as a hybrid access point to manage many GNsin WDS. The GNs are water quality sensors that collect radio frequency (RF) energy from the RF signals delivered by the UAV and utilise this energy to relay information via an uplink. Optimum strategies are demonstrated to efficiently handle this process as part of a zero-power system: removing the need for manual battery charging of devices, while at the same time optimizing energy and data transfer over WPCN. Since static optimization does not account for the UAV's dynamics, dynamic optimization techniques are also necessary. By developing an efficient trajectory, the suggested technique also reduces the overall flying duration and, therefore, the UAV's energy consumption. This combination of techniques also drastically reduces the complexity and calculation overhead of purely high order static optimizations. To test and validate the efficacy of the extremum seeking implementation, comparison with the optimal sliding mode technique is also undertaken. These approaches are applied to ten distinct case studies by randomly relocating the GNs to various positions. The findings from a random sample of four of these is presented, which reveal that the proposed strategy reduces the UAV's energy usage significantly by about 16 percent compared to existing methods. The (hybrid) static and dynamic zero-power optimization strategies demonstrated here are readily extendable to the control of water quality and pollution in natural freshwater resources and this will be discussed at the end of this thesis

A survey on intelligent computation offloading and pricing strategy in UAV-Enabled MEC network: Challenges and research directions

The lack of resource constraints for edge servers makes it difficult to simultaneously perform a large number of Mobile Devices’ (MDs) requests. The Mobile Network Operator (MNO) must then select how to delegate MD queries to its Mobile Edge Computing (MEC) server in order to maximize the overall benefit of admitted requests with varying latency needs. Unmanned Aerial Vehicles (UAVs) and Artificial Intelligent (AI) can increase MNO performance because of their flexibility in deployment, high mobility of UAV, and efficiency of AI algorithms. There is a trade-off between the cost incurred by the MD and the profit received by the MNO. Intelligent computing offloading to UAV-enabled MEC, on the other hand, is a promising way to bridge the gap between MDs' limited processing resources, as well as the intelligent algorithms that are utilized for computation offloading in the UAV-MEC network and the high computing demands of upcoming applications. This study looks at some of the research on the benefits of computation offloading process in the UAV-MEC network, as well as the intelligent models that are utilized for computation offloading in the UAV-MEC network. In addition, this article examines several intelligent pricing techniques in different structures in the UAV-MEC network. Finally, this work highlights some important open research issues and future research directions of Artificial Intelligent (AI) in computation offloading and applying intelligent pricing strategies in the UAV-MEC network

Exploring the Technical Advances and Limits of Autonomous UAVs for Precise Agriculture in Constrained Environments

In the field of precise agriculture with autonomous unmanned aerial vehicles (UAVs), the utilization of drones holds significant potential to transform crop monitoring, management, and harvesting techniques. However, despite the numerous benefits of UAVs in smart farming, there are still several technical challenges that need to be addressed in order to render their widespread adoption possible, especially in constrained environments. This paper provides a study of the technical aspect and limitations of autonomous UAVs in precise agriculture applications for constrained environments

Nonlinear hierarchical adaptive control of a quad tilt-wing UAV

Unmanned aerial vehicles (UAVs) have become an indispensable part of many military and civilian applications. The popularity of these vehicles have led to a demand for novel mechanical con gurations and controllers which are adaptable for the requirements of the desired tasks. In this thesis, a nonlinear hierarchical adaptive controller is proposed for the control of a quad tilt-wing unmanned aerial vehicle (SUAVI: Sabanci University Unmanned Aerial Vehicle). SUAVI can take-o vertically as a helicopter and ies like a xed-wing airplane during the long duration ights for power e ciency. In order to compensate for the uncertainties such as moment of inertia changes during the transition from vertical mode to horizontal mode and aerodynamic disturbances an adaptive controller framework is proposed. In the outer loop of the hierarchical control, a model reference adaptive controller with robustifying terms creates required forces to track the reference trajectory and in the inner loop a nonlinear adaptive controller tracks the desired attitude angles to achieve these forces. The proposed controller is applied to a high delity UAV model in the presence of uncertainties, wind disturbances and measurement noise. A structural failure is introduced which results in sudden actuator power drops, mass, inertia and center of gravity changes. Performance of the proposed controller is compared with the feedback linearized xed controller used in earlier studies

Surveillance Planning against Smart Insurgents in Complex Terrain

This study is concerned with finding a way to solve a surveillance system allocation problem based on the need to consider intelligent insurgency that takes place in a complex geographical environment. Although this effort can be generalized to other situations, it is particularly geared towards protecting military outposts in foreign lands. The technological assets that are assumed available include stare-devices, such as tower-cameras and aerostats, as well as manned and unmanned aerial systems. Since acquiring these assets depends on the ability to control and monitor them on the target terrain, their operations on the geo-location of interest ought to be evaluated. Such an assessment has to also consider the risks associated with the environmental advantages that are accessible to a smart adversary. Failure to consider these aspects might render the forces vulnerable to surprise attacks. The problem of this study is formulated as follows: given a complex terrain and a smart adversary, what types of surveillance systems, and how many entities of each kind, does a military outpost need to adequately monitor its surrounding environment? To answer this question, an analytical framework is developed and structured as a series of problems that are solved in a comprehensive and realistic fashion. This includes digitizing the terrain into a grid of cell objects, identifying high-risk spots, generating flight tours, and assigning the appropriate surveillance system to the right route or area. Optimization tools are employed to empower the framework in enforcing constraints--such as fuel/battery endurance, flying assets at adequate altitudes, and respecting the climbing/diving rate limits of the aerial vehicles--and optimizing certain mission objectives--e.g. revisiting critical regions in a timely manner, minimizing manning requirements, and maximizing sensor-captured image quality. The framework is embedded in a software application that supports a friendly user interface, which includes the visualization of maps, tours, and related statistics. The final product is expected to support designing surveillance plans for remote military outposts and making critical decisions in a more reliable manner

INTELLIGENT UAV SCOUTING FOR FIELD CONDITION MONITORING

Precision agriculture requires detailed and timely information about field condition. In less than the short flight time a UAV (Unmanned Aerial Vehicle) can provide, an entire field can be scanned at the highest allowed altitude. The resulting NDVI (Normalized Difference Vegetation Index) imagery can then be used to classify each point in the field using a FIS (Fuzzy Inference System). This identifies areas that are expected to be similar, but only closer inspection can quantify and diagnose crop properties. In the remaining flight time, the goal is to scout a set of representative points maximizing the quality of actionable information about the field condition. This quality is defined by two new metrics: the average sampling probability (ASP) and the total scouting luminance (TSL). In simulations, the scouting flight plan created using a GA (Genetic Algorithm) significantly outperformed plans created by grid sampling or human experts, obtaining over 99% ASP while improving TSL by an average of 285%

MODELING OF INNOVATIVE LIGHTER-THAN-AIR UAV FOR LOGISTICS, SURVEILLANCE AND RESCUE OPERATIONS

An unmanned aerial vehicle (UAV) is an aircraft that can operate without the presence of pilots, either through remote control or automated systems. The first part of the dissertation provides an overview of the various types of UAVs and their design features. The second section delves into specific experiences using UAVs as part of an automated monitoring system to identify potential problems such as pipeline leaks or equipment damage by conducting airborne surveys.Lighter-than-air UAVs, such as airships, can be used for various applications, from aerial photography, including surveying terrain, monitoring an area for security purposes and gathering information about weather patterns to surveillance. The third part reveals the applications of UAVs for assisting in search and rescue operations in disaster situations and transporting natural gas. Using PowerSim software, a model of airship behaviour was created to analyze the sprint-and-drift concept and study methods of increasing the operational time of airships while having a lower environmental impact when compared to a constantly switched-on engine. The analysis provided a reliable percentage of finding the victim during patrolling operations, although it did not account for victim behaviour. The study has also shown that airships may serve as a viable alternative to pipeline transportation for natural gas. The technology has the potential to revolutionize natural gas transportation, optimizing efficiency and reducing environmental impact. Additionally, airships have a unique advantage in accessing remote and otherwise inaccessible areas, providing significant benefits in the energy sector. The employment of this technology was studied to be effective in specific scenarios, and it will be worth continuing to study it for a positive impact on society and the environment

Map-Based Localization for Unmanned Aerial Vehicle Navigation

Unmanned Aerial Vehicles (UAVs) require precise pose estimation when navigating in indoor and GNSS-denied / GNSS-degraded outdoor environments. The possibility of crashing in these environments is high, as spaces are confined, with many moving obstacles. There are many solutions for localization in GNSS-denied environments, and many different technologies are used. Common solutions involve setting up or using existing infrastructure, such as beacons, Wi-Fi, or surveyed targets. These solutions were avoided because the cost should be proportional to the number of users, not the coverage area. Heavy and expensive sensors, for example a high-end IMU, were also avoided. Given these requirements, a camera-based localization solution was selected for the sensor pose estimation. Several camera-based localization approaches were investigated. Map-based localization methods were shown to be the most efficient because they close loops using a pre-existing map, thus the amount of data and the amount of time spent collecting data are reduced as there is no need to re-observe the same areas multiple times. This dissertation proposes a solution to address the task of fully localizing a monocular camera onboard a UAV with respect to a known environment (i.e., it is assumed that a 3D model of the environment is available) for the purpose of navigation for UAVs in structured environments. Incremental map-based localization involves tracking a map through an image sequence. When the map is a 3D model, this task is referred to as model-based tracking. A by-product of the tracker is the relative 3D pose (position and orientation) between the camera and the object being tracked. State-of-the-art solutions advocate that tracking geometry is more robust than tracking image texture because edges are more invariant to changes in object appearance and lighting. However, model-based trackers have been limited to tracking small simple objects in small environments. An assessment was performed in tracking larger, more complex building models, in larger environments. A state-of-the art model-based tracker called ViSP (Visual Servoing Platform) was applied in tracking outdoor and indoor buildings using a UAVs low-cost camera. The assessment revealed weaknesses at large scales. Specifically, ViSP failed when tracking was lost, and needed to be manually re-initialized. Failure occurred when there was a lack of model features in the cameras field of view, and because of rapid camera motion. Experiments revealed that ViSP achieved positional accuracies similar to single point positioning solutions obtained from single-frequency (L1) GPS observations standard deviations around 10 metres. These errors were considered to be large, considering the geometric accuracy of the 3D model used in the experiments was 10 to 40 cm. The first contribution of this dissertation proposes to increase the performance of the localization system by combining ViSP with map-building incremental localization, also referred to as simultaneous localization and mapping (SLAM). Experimental results in both indoor and outdoor environments show sub-metre positional accuracies were achieved, while reducing the number of tracking losses throughout the image sequence. It is shown that by integrating model-based tracking with SLAM, not only does SLAM improve model tracking performance, but the model-based tracker alleviates the computational expense of SLAMs loop closing procedure to improve runtime performance. Experiments also revealed that ViSP was unable to handle occlusions when a complete 3D building model was used, resulting in large errors in its pose estimates. The second contribution of this dissertation is a novel map-based incremental localization algorithm that improves tracking performance, and increases pose estimation accuracies from ViSP. The novelty of this algorithm is the implementation of an efficient matching process that identifies corresponding linear features from the UAVs RGB image data and a large, complex, and untextured 3D model. The proposed model-based tracker improved positional accuracies from 10 m (obtained with ViSP) to 46 cm in outdoor environments, and improved from an unattainable result using VISP to 2 cm positional accuracies in large indoor environments. The main disadvantage of any incremental algorithm is that it requires the camera pose of the first frame. Initialization is often a manual process. The third contribution of this dissertation is a map-based absolute localization algorithm that automatically estimates the camera pose when no prior pose information is available. The method benefits from vertical line matching to accomplish a registration procedure of the reference model views with a set of initial input images via geometric hashing. Results demonstrate that sub-metre positional accuracies were achieved and a proposed enhancement of conventional geometric hashing produced more correct matches - 75% of the correct matches were identified, compared to 11%. Further the number of incorrect matches was reduced by 80%