10 research outputs found
A Comprehensive Overview on 5G-and-Beyond Networks with UAVs: From Communications to Sensing and Intelligence
Due to the advancements in cellular technologies and the dense deployment of
cellular infrastructure, integrating unmanned aerial vehicles (UAVs) into the
fifth-generation (5G) and beyond cellular networks is a promising solution to
achieve safe UAV operation as well as enabling diversified applications with
mission-specific payload data delivery. In particular, 5G networks need to
support three typical usage scenarios, namely, enhanced mobile broadband
(eMBB), ultra-reliable low-latency communications (URLLC), and massive
machine-type communications (mMTC). On the one hand, UAVs can be leveraged as
cost-effective aerial platforms to provide ground users with enhanced
communication services by exploiting their high cruising altitude and
controllable maneuverability in three-dimensional (3D) space. On the other
hand, providing such communication services simultaneously for both UAV and
ground users poses new challenges due to the need for ubiquitous 3D signal
coverage as well as the strong air-ground network interference. Besides the
requirement of high-performance wireless communications, the ability to support
effective and efficient sensing as well as network intelligence is also
essential for 5G-and-beyond 3D heterogeneous wireless networks with coexisting
aerial and ground users. In this paper, we provide a comprehensive overview of
the latest research efforts on integrating UAVs into cellular networks, with an
emphasis on how to exploit advanced techniques (e.g., intelligent reflecting
surface, short packet transmission, energy harvesting, joint communication and
radar sensing, and edge intelligence) to meet the diversified service
requirements of next-generation wireless systems. Moreover, we highlight
important directions for further investigation in future work.Comment: Accepted by IEEE JSA
SWIPT aided Cooperative Communications with Energy Harvesting based Selective-Decode-and-Forward Protocol: Benefiting from Channel Aging Effect
Simultaneous wireless information and power transfer (SWIPT) in radio-frequency (RF) bands enables flexible deployment of battery-powered relays for extending communication coverage. Relays receive downlink RF signals emitted by a source for information decoding and energy harvesting, while the harvested energy is consumed for both information decoding and information forwarding to a destination. An energy harvesting based selective-decode-and-forward (EH-SDF) protocol is proposed, where only the relays having information correctly decoded are activated for information forwarding, while others harvest and store energy for the future use. By considering the channel aging effect, we propose a joint relay selection, power allocation, transmit beamforming and signal splitting design in order to maximise the end-to-end (e2e) throughput of this EH-SDF aided cooperative communication system. Two scenarios with/without direct link between the source and the destination are studied, respectively. The original formulated non-convex optimisation problems with coupled variables are decoupled into three subproblems which are solved by an iterative optimisation algorithm. Numerical results demonstrate that our design with the EH-SDF protocol achieves a higher e2e throughput than the traditional decode-and-forward (DF) counterpart. Moreover, the impact of the channel aging effect on the e2e throughput is also evaluated
Five Facets of 6G: Research Challenges and Opportunities
Whilst the fifth-generation (5G) systems are being rolled out across the
globe, researchers have turned their attention to the exploration of radical
next-generation solutions. At this early evolutionary stage we survey five main
research facets of this field, namely {\em Facet~1: next-generation
architectures, spectrum and services, Facet~2: next-generation networking,
Facet~3: Internet of Things (IoT), Facet~4: wireless positioning and sensing,
as well as Facet~5: applications of deep learning in 6G networks.} In this
paper, we have provided a critical appraisal of the literature of promising
techniques ranging from the associated architectures, networking, applications
as well as designs. We have portrayed a plethora of heterogeneous architectures
relying on cooperative hybrid networks supported by diverse access and
transmission mechanisms. The vulnerabilities of these techniques are also
addressed and carefully considered for highlighting the most of promising
future research directions. Additionally, we have listed a rich suite of
learning-driven optimization techniques. We conclude by observing the
evolutionary paradigm-shift that has taken place from pure single-component
bandwidth-efficiency, power-efficiency or delay-optimization towards
multi-component designs, as exemplified by the twin-component ultra-reliable
low-latency mode of the 5G system. We advocate a further evolutionary step
towards multi-component Pareto optimization, which requires the exploration of
the entire Pareto front of all optiomal solutions, where none of the components
of the objective function may be improved without degrading at least one of the
other components
Intelligent-Reflecting-Surface-Assisted UAV Communications for 6G Networks
In 6th-Generation (6G) mobile networks, Intelligent Reflective Surfaces
(IRSs) and Unmanned Aerial Vehicles (UAVs) have emerged as promising
technologies to address the coverage difficulties and resource constraints
faced by terrestrial networks. UAVs, with their mobility and low costs, offer
diverse connectivity options for mobile users and a novel deployment paradigm
for 6G networks. However, the limited battery capacity of UAVs, dynamic and
unpredictable channel environments, and communication resource constraints
result in poor performance of traditional UAV-based networks. IRSs can not only
reconstruct the wireless environment in a unique way, but also achieve wireless
network relay in a cost-effective manner. Hence, it receives significant
attention as a promising solution to solve the above challenges. In this
article, we conduct a comprehensive survey on IRS-assisted UAV communications
for 6G networks. First, primary issues, key technologies, and application
scenarios of IRS-assisted UAV communications for 6G networks are introduced.
Then, we put forward specific solutions to the issues of IRS-assisted UAV
communications. Finally, we discuss some open issues and future research
directions to guide researchers in related fields
Wireless Resource Management in Industrial Internet of Things
Wireless communications are highly demanded in Industrial Internet of Things (IIoT) to realize the vision of future flexible, scalable and customized manufacturing. Despite the academia research and on-going standardization efforts, there are still many challenges for IIoT, including the ultra-high reliability and low latency requirements, spectral shortage, and limited energy supply. To tackle the above challenges, we will focus on wireless resource management in IIoT in this thesis by designing novel framework, analyzing performance and optimizing wireless resources. We first propose a bandwidth reservation scheme for Tactile Internet in the local area network of IIoT. Specifically, we minimize the reserved bandwidth taking into account the classification errors while ensuring the latency and reliability requirements. We then extend to the more challenging long distance communications for IIoT, which can support the global skill-set delivery network. We propose to predict the future system state and send to the receiver in advance, and thus the delay experienced by the user is reduced. The bandwidth usage is analysed and minimized to ensure delay and reliability requirements. Finally, we address the issue of energy supply in IIoT, where Radio frequency energy harvesting (RFEH) is used to charge unattended IIoT low-power devices remotely and continuously. To motivate the third-party chargers, a contract theory-based framework is proposed, where the optimal contract is derived to maximize the social welfare
Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Towards 6G
The next wave of wireless technologies is proliferating in connecting things
among themselves as well as to humans. In the era of the Internet of things
(IoT), billions of sensors, machines, vehicles, drones, and robots will be
connected, making the world around us smarter. The IoT will encompass devices
that must wirelessly communicate a diverse set of data gathered from the
environment for myriad new applications. The ultimate goal is to extract
insights from this data and develop solutions that improve quality of life and
generate new revenue. Providing large-scale, long-lasting, reliable, and near
real-time connectivity is the major challenge in enabling a smart connected
world. This paper provides a comprehensive survey on existing and emerging
communication solutions for serving IoT applications in the context of
cellular, wide-area, as well as non-terrestrial networks. Specifically,
wireless technology enhancements for providing IoT access in fifth-generation
(5G) and beyond cellular networks, and communication networks over the
unlicensed spectrum are presented. Aligned with the main key performance
indicators of 5G and beyond 5G networks, we investigate solutions and standards
that enable energy efficiency, reliability, low latency, and scalability
(connection density) of current and future IoT networks. The solutions include
grant-free access and channel coding for short-packet communications,
non-orthogonal multiple access, and on-device intelligence. Further, a vision
of new paradigm shifts in communication networks in the 2030s is provided, and
the integration of the associated new technologies like artificial
intelligence, non-terrestrial networks, and new spectra is elaborated. Finally,
future research directions toward beyond 5G IoT networks are pointed out.Comment: Submitted for review to IEEE CS&
Finite blocklength non-orthogonal cooperative communication relying on SWIPT-enabled energy harvesting relays
A finite blocklength (FBL) twin-user non-orthogonal cooperative downlink system is considered, wherein a base station simultaneously communicates with the users whilst relying on simultaneous wireless information and power transfer (SWIPT) enabled energy harvesting relay. Closed-form analytical expressions are obtained for the end-to-end average block error rate (BLER) assuming potentially dissimilar Nakagami-m fading links. Furthermore, asymptotic expressions are derived for the individual user’s end-to-end average BLER performance and diversity order at high signal to noise ratios (SNRs). Additionally, since, the stronger user’s signal is detected, while assuming theweaker user’s signal to be interference, an analytical bound has been obtained for characterizing the effect of this interference on the BLER performance of both users. Furthermore, a framework is developed for joint relay splitting factor and user power allocation towards end-to-end blocklength minimization understrict reliability constraints by converting the original non-convex optimization problem to a convex geometric program (GP) that can be solved efficiently. Simulation results are presented to validate the analytical expressions derived and illustrate the efficacy of the proposed scheme