Adaptive Beamforming for Distributed Relay Networks

Tremendous research work has been put into the realm of distributed relay networks, for its distinct advantages in exploiting spatial diversity, reducing the deployment cost and mitigating the effect of fading in wireless transmission without the multi-antenna requirement on the relay nodes. In typical relay networks, data transmission between a source and a destination is assisted by relay nodes with various relaying protocols. In this thesis, we investigate how to adaptively select the relay weights to meet specific interference suppressing requirements of the network. The thesis makes original contributions by proposing a filter-and-forward (FF) relay scheme in cognitive radio networks and an iterative algorithm based transceiver beamforming scheme for multi-pair relay networks. In the firstly proposed scheme, the relay nodes are adapted to deal with the inter-symbol-interference (ISI) that is introduced in the frequency-selective channel environment and the leakage interference introduced to the primary user. Our proposed scheme uses FF relay beamforming at the relay nodes to combat the frequency selective channel, and our scheme also aims to maximize the received SINR at the secondary destination, while suppressing the interference introduced to the primary user (PU). This scheme is further extended to accommodate a relay nodes output power constraint. Under certain criteria, the extended scheme can be transformed into two sub-schemes with lower computational complexity, where their closed-form solutions are derived. The probability that we can perform these transformations is also tested, which reveals under what circumstances our second scheme can be solved more easily. Then, we propose an iterative transceiver beamforming scheme for the multi-pair distributed relay networks. In our scheme, we consider multi-antenna users in one user group communicating with their partners in the other user group via distributed single-antenna relay nodes. We employ transceiver beamformers at the user nodes, and through our proposed iterative algorithm the relay nodes and user nodes can be coordinatively adapted to suppress the inter-pair-interference (IPI) while maximize the desired signal power. We also divide the rather difficult transceiver beamforming problem into three sub-problems, each of which can be solved with sub-optimal solutions. The transmit beamforming vectors, distributed relay coefficients and the receive beamforming vectors are obtained by iteratively solving these three sub-problems, each having a closed-form solution. The tasks of maximizing desired signal power, and reducing inter-pair interference (IPI) and noise are thus allocated to different iteration steps. By this arrangement, the transmit and receiver beamformers of each user are responsible for improving its own performance and the distributed relay nodes can be employed with simple amplify-and-forward(AF) protocols and only forward the received signal with proper scalar. This iterative relay beamforming scheme is further extended by distributing the computation tasks among each user and relay node, through which high computational efficiency can be ensured while extra overhead of bandwidth is need for sharing beamforming vector updates during the iteration steps. Furthermore, with respect to the channel uncertainty, two more relay strategies are proposed considering two different requirements from the communication network: sum relay output power and individual relay output power. At last, the application of the iterative relay beamforming method in cognitive radio networks is studied, where multiple pairs of users are considered as secondary users (SUs), and the designed transmit beamforming vector, relay beamforming vector and receive beamforming vector together guarantee that the inner interference of their transmissions is well suppressed while the interference introduced by them to the PU is restricted under a predefined threshold

Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey

This paper provides a comprehensive review of the domain of physical layer security in multiuser wireless networks. The essential premise of physical-layer security is to enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers without relying on higher-layer encryption. This can be achieved primarily in two ways: without the need for a secret key by intelligently designing transmit coding strategies, or by exploiting the wireless communication medium to develop secret keys over public channels. The survey begins with an overview of the foundations dating back to the pioneering work of Shannon and Wyner on information-theoretic security. We then describe the evolution of secure transmission strategies from point-to-point channels to multiple-antenna systems, followed by generalizations to multiuser broadcast, multiple-access, interference, and relay networks. Secret-key generation and establishment protocols based on physical layer mechanisms are subsequently covered. Approaches for secrecy based on channel coding design are then examined, along with a description of inter-disciplinary approaches based on game theory and stochastic geometry. The associated problem of physical-layer message authentication is also introduced briefly. The survey concludes with observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials, 201

A Survey of Physical Layer Security Techniques for 5G Wireless Networks and Challenges Ahead

Physical layer security which safeguards data confidentiality based on the information-theoretic approaches has received significant research interest recently. The key idea behind physical layer security is to utilize the intrinsic randomness of the transmission channel to guarantee the security in physical layer. The evolution towards 5G wireless communications poses new challenges for physical layer security research. This paper provides a latest survey of the physical layer security research on various promising 5G technologies, including physical layer security coding, massive multiple-input multiple-output, millimeter wave communications, heterogeneous networks, non-orthogonal multiple access, full duplex technology, etc. Technical challenges which remain unresolved at the time of writing are summarized and the future trends of physical layer security in 5G and beyond are discussed.Comment: To appear in IEEE Journal on Selected Areas in Communication

How to Understand LMMSE Transceiver Design for MIMO Systems From Quadratic Matrix Programming

In this paper, a unified linear minimum mean-square-error (LMMSE) transceiver design framework is investigated, which is suitable for a wide range of wireless systems. The unified design is based on an elegant and powerful mathematical programming technology termed as quadratic matrix programming (QMP). Based on QMP it can be observed that for different wireless systems, there are certain common characteristics which can be exploited to design LMMSE transceivers e.g., the quadratic forms. It is also discovered that evolving from a point-to-point MIMO system to various advanced wireless systems such as multi-cell coordinated systems, multi-user MIMO systems, MIMO cognitive radio systems, amplify-and-forward MIMO relaying systems and so on, the quadratic nature is always kept and the LMMSE transceiver designs can always be carried out via iteratively solving a number of QMP problems. A comprehensive framework on how to solve QMP problems is also given. The work presented in this paper is likely to be the first shoot for the transceiver design for the future ever-changing wireless systems.Comment: 31 pages, 4 figures, Accepted by IET Communication

Reconfigurable Intelligent Surfaces for Energy Efficiency in Wireless Communication

The adoption of a Reconfigurable Intelligent Surface (RIS) for downlink multi-user communication from a multi-antenna base station is investigated in this paper. We develop energy-efficient designs for both the transmit power allocation and the phase shifts of the surface reflecting elements, subject to individual link budget guarantees for the mobile users. This leads to non-convex design optimization problems for which to tackle we propose two computationally affordable approaches, capitalizing on alternating maximization, gradient descent search, and sequential fractional programming. Specifically, one algorithm employs gradient descent for obtaining the RIS phase coefficients, and fractional programming for optimal transmit power allocation. Instead, the second algorithm employs sequential fractional programming for the optimization of the RIS phase shifts. In addition, a realistic power consumption model for RIS-based systems is presented, and the performance of the proposed methods is analyzed in a realistic outdoor environment. In particular, our results show that the proposed RIS-based resource allocation methods are able to provide up to $300\%$ higher energy efficiency, in comparison with the use of regular multi-antenna amplify-and-forward relaying.Comment: Accepted by IEEE TWC; additional materials on the topic are included in the 2018 conference publications at ICASSP (https://ieeexplore.ieee.org/abstract/document/8461496) and GLOBECOM 2018 (arXiv:1809.05397

Robust Iterative Transceiver Beamforming For Multipair Two-Way Distributed Relay Networks

OAPA In this paper, the transceiver beamforming problem is studied for multipair two-way distributed relay networks, particularly with multi-antenna user nodes and in the presence of channel state errors. With multi-antenna setting on the user nodes, some of the usual signal processing tasks are shifted from the relay nodes to the user nodes with the proposed transceiver beamforming designs. The transmit beamforming vectors, distributed relay coefficients and the receive beamforming vectors are obtained by iteratively solving three sub-problems, each having a closed-form solution. The tasks of maximizing desired signal power, and reducing inter-pair interference (IPI) and noise are thus allocated to different iteration steps. By this arrangement, the transmit and receive beamformers of each user are responsible for improving its own performance and the distributed relay nodes with simple amplify-and-forward protocol aim at creating a comfortable communication environment for all user pairs. With respect to the channel uncertainty, two relay strategies are proposed considering two different requirements from the communication network: sum relay output power and individual relay output power. Our simulation demonstrates that the performance improvement can be very significant through cooperation of the three components, especially when the number of relay nodes is large