Distributed Constructions of Dual-Failure Fault-Tolerant Distance Preservers

Fault tolerant distance preservers (spanners) are sparse subgraphs that preserve (approximate) distances between given pairs of vertices under edge or vertex failures. So-far, these structures have been studied thoroughly mainly from a centralized viewpoint. Despite the fact fault tolerant preservers are mainly motivated by the error-prone nature of distributed networks, not much is known on the distributed computational aspects of these structures. In this paper, we present distributed algorithms for constructing fault tolerant distance preservers and +2 additive spanners that are resilient to at most two edge faults. Prior to our work, the only non-trivial constructions known were for the single fault and single source setting by [Ghaffari and Parter SPAA\u2716]. Our key technical contribution is a distributed algorithm for computing distance preservers w.r.t. a subset S of source vertices, resilient to two edge faults. The output structure contains a BFS tree BFS(s,G ? {e?,e?}) for every s ? S and every e?,e? ? G. The distributed construction of this structure is based on a delicate balance between the edge congestion (formed by running multiple BFS trees simultaneously) and the sparsity of the output subgraph. No sublinear-round algorithms for constructing these structures have been known before

Sparse Fault-Tolerant BFS Trees

This paper addresses the problem of designing a sparse {\em fault-tolerant} BFS tree, or {\em FT-BFS tree} for short, namely, a sparse subgraph $T$ of the given network $G$ such that subsequent to the failure of a single edge or vertex, the surviving part $T'$ of $T$ still contains a BFS spanning tree for (the surviving part of) $G$. Our main results are as follows. We present an algorithm that for every $n$-vertex graph $G$ and source node $s$ constructs a (single edge failure) FT-BFS tree rooted at $s$ with O(n \cdot \min\{\Depth(s), \sqrt{n}\}) edges, where \Depth(s) is the depth of the BFS tree rooted at $s$. This result is complemented by a matching lower bound, showing that there exist $n$-vertex graphs with a source node $s$ for which any edge (or vertex) FT-BFS tree rooted at $s$ has $\Omega(n^{3/2})$ edges. We then consider {\em fault-tolerant multi-source BFS trees}, or {\em FT-MBFS trees} for short, aiming to provide (following a failure) a BFS tree rooted at each source $s\in S$ for some subset of sources $S\subseteq V$. Again, tight bounds are provided, showing that there exists a poly-time algorithm that for every $n$-vertex graph and source set $S \subseteq V$ of size $\sigma$ constructs a (single failure) FT-MBFS tree $T^*(S)$ from each source $s_i \in S$, with $O(\sqrt{\sigma} \cdot n^{3/2})$ edges, and on the other hand there exist $n$-vertex graphs with source sets $S \subseteq V$ of cardinality $\sigma$, on which any FT-MBFS tree from $S$ has $\Omega(\sqrt{\sigma}\cdot n^{3/2})$ edges. Finally, we propose an $O(\log n)$ approximation algorithm for constructing FT-BFS and FT-MBFS structures. The latter is complemented by a hardness result stating that there exists no $\Omega(\log n)$ approximation algorithm for these problems under standard complexity assumptions

Multiple-Edge-Fault-Tolerant Approximate Shortest-Path Trees

Let $G$ be an $n$-node and $m$-edge positively real-weighted undirected graph. For any given integer $f \ge 1$, we study the problem of designing a sparse \emph{f-edge-fault-tolerant} ($f$-EFT) $\sigma${\em -approximate single-source shortest-path tree} ($\sigma$-ASPT), namely a subgraph of $G$ having as few edges as possible and which, following the failure of a set $F$ of at most $f$ edges in $G$, contains paths from a fixed source that are stretched at most by a factor of $\sigma$. To this respect, we provide an algorithm that efficiently computes an $f$-EFT $(2|F|+1)$-ASPT of size $O(f n)$. Our structure improves on a previous related construction designed for \emph{unweighted} graphs, having the same size but guaranteeing a larger stretch factor of $3(f+1)$, plus an additive term of $(f+1) \log n$. Then, we show how to convert our structure into an efficient $f$-EFT \emph{single-source distance oracle} (SSDO), that can be built in $\widetilde{O}(f m)$ time, has size $O(fn \log^2 n)$, and is able to report, after the failure of the edge set $F$, in $O(|F|^2 \log^2 n)$ time a $(2|F|+1)$-approximate distance from the source to any node, and a corresponding approximate path in the same amount of time plus the path's size. Such an oracle is obtained by handling another fundamental problem, namely that of updating a \emph{minimum spanning forest} (MSF) of $G$ after that a \emph{batch} of $k$ simultaneous edge modifications (i.e., edge insertions, deletions and weight changes) is performed. For this problem, we build in $O(m \log^3 n)$ time a \emph{sensitivity} oracle of size $O(m \log^2 n)$, that reports in $O(k^2 \log^2 n)$ time the (at most $2k$) edges either exiting from or entering into the MSF. [...]Comment: 16 pages, 4 figure

Effective Edge-Fault-Tolerant Single-Source Spanners via Best (or Good) Swap Edges

Computing \emph{all best swap edges} (ABSE) of a spanning tree $T$ of a given $n$-vertex and $m$-edge undirected and weighted graph $G$ means to select, for each edge $e$ of $T$, a corresponding non-tree edge $f$, in such a way that the tree obtained by replacing $e$ with $f$ enjoys some optimality criterion (which is naturally defined according to some objective function originally addressed by $T$). Solving efficiently an ABSE problem is by now a classic algorithmic issue, since it conveys a very successful way of coping with a (transient) \emph{edge failure} in tree-based communication networks: just replace the failing edge with its respective swap edge, so as that the connectivity is promptly reestablished by minimizing the rerouting and set-up costs. In this paper, we solve the ABSE problem for the case in which $T$ is a \emph{single-source shortest-path tree} of $G$, and our two selected swap criteria aim to minimize either the \emph{maximum} or the \emph{average stretch} in the swap tree of all the paths emanating from the source. Having these criteria in mind, the obtained structures can then be reviewed as \emph{edge-fault-tolerant single-source spanners}. For them, we propose two efficient algorithms running in $O(m n +n^2 \log n)$ and $O(m n \log \alpha(m,n))$ time, respectively, and we show that the guaranteed (either maximum or average, respectively) stretch factor is equal to 3, and this is tight. Moreover, for the maximum stretch, we also propose an almost linear $O(m \log \alpha(m,n))$ time algorithm computing a set of \emph{good} swap edges, each of which will guarantee a relative approximation factor on the maximum stretch of $3/2$ (tight) as opposed to that provided by the corresponding BSE. Surprisingly, no previous results were known for these two very natural swap problems.Comment: 15 pages, 4 figures, SIROCCO 201

Wildcard dimensions, coding theory and fault-tolerant meshes and hypercubes

Hypercubes, meshes and tori are well known interconnection networks for parallel computers. The sets of edges in those graphs can be partitioned to dimensions. It is well known that the hypercube can be extended by adding a wildcard dimension resulting in a folded hypercube that has better fault-tolerant and communication capabilities. First we prove that the folded hypercube is optimal in the sense that only a single wildcard dimension can be added to the hypercube. We then investigate the idea of adding wildcard dimensions to d-dimensional meshes and tori. Using techniques from error correcting codes we construct d-dimensional meshes and tori with wildcard dimensions. Finally, we show how these constructions can be used to tolerate edge and node faults in mesh and torus networks

Resource costs for fault-tolerant linear optical quantum computing

Linear optical quantum computing (LOQC) seems attractively simple: information is borne entirely by light and processed by components such as beam splitters, phase shifters and detectors. However this very simplicity leads to limitations, such as the lack of deterministic entangling operations, which are compensated for by using substantial hardware overheads. Here we quantify the resource costs for full scale LOQC by proposing a specific protocol based on the surface code. With the caveat that our protocol can be further optimised, we report that the required number of physical components is at least five orders of magnitude greater than in comparable matter-based systems. Moreover the resource requirements grow higher if the per-component photon loss rate is worse than one in a thousand, or the per-component noise rate is worse than $10^{-5}$. We identify the performance of switches in the network as the single most influential factor influencing resource scaling

A bibliography on formal methods for system specification, design and validation

Literature on the specification, design, verification, testing, and evaluation of avionics systems was surveyed, providing 655 citations. Journal papers, conference papers, and technical reports are included. Manual and computer-based methods were employed. Keywords used in the online search are listed