Fault Tolerant Nanosatellite Computing on a Budget

In this contribution, we present a CubeSat-compatible on-board computer (OBC) architecture that offers strong fault tolerance to enable the use of such spacecraft in critical and long-term missions. We describe in detail the design of our OBC’s breadboard setup, and document its composition from the component-level, all the way down to the software level. Fault tolerance in this OBC is achieved without resorting to radiation hardening, just intelligent through software. The OBC ages graceful, and makes use of FPGA-reconfiguration and mixed criticality. It can dynamically adapt to changing performance requirements throughout a space mission. We developed a proof-of-concept with several Xilinx Ultrascale and Ultrascale+ FPGAs. With the smallest Kintex Ultrascale+ KU3P device, we achieve 1.94W total power consumption at 300Mhz, well within the power budget range of current 2U CubeSats. To our knowledge, this is the first scalable and COTS-based, widely reproducible OBC solution which can offer strong fault coverage even for small CubeSats. To reproduce this OBC architecture, no custom-written, proprietary, or protected IP is needed, and the needed design tools are available free-of-charge to academics. All COTS components required to construct this architecture can be purchased on the open market, and are affordable even for academic and scientific CubeSat developers

Fault-Tolerant Nanosatellite Computing on a Budget

Computer Systems, Imagery and Medi

Fault-tolerant satellite computing with modern semiconductors

Miniaturized satellites enable a variety space missions which were in the past infeasible, impractical or uneconomical with traditionally-designed heavier spacecraft. Especially CubeSats can be launched and manufactured rapidly at low cost from commercial components, even in academic environments. However, due to their low reliability and brief lifetime, they are usually not considered suitable for life- and safety-critical services, complex multi-phased solar-system-exploration missions, and missions with a longer duration. Commercial electronics are key to satellite miniaturization, but also responsible for their low reliability: Until 2019, there existed no reliable or fault-tolerant computer architectures suitable for very small satellites. To overcome this deficit, a novel on-board-computer architecture is described in this thesis.Robustness is assured without resorting to radiation hardening, but through software measures implemented within a robust-by-design multiprocessor-system-on-chip. This fault-tolerant architecture is component-wise simple and can dynamically adapt to changing performance requirements throughout a mission. It can support graceful aging by exploiting FPGA-reconfiguration and mixed-criticality.  Experimentally, we achieve 1.94W power consumption at 300Mhz with a Xilinx Kintex Ultrascale+ proof-of-concept, which is well within the powerbudget range of current 2U CubeSats. To our knowledge, this is the first COTS-based, reproducible on-board-computer architecture that can offer strong fault coverage even for small CubeSats.European Space AgencyComputer Systems, Imagery and Medi