75 research outputs found
On the Performance of the Relay-ARQ Networks
This paper investigates the performance of relay networks in the presence of
hybrid automatic repeat request (ARQ) feedback and adaptive power allocation.
The throughput and the outage probability of different hybrid ARQ protocols are
studied for independent and spatially-correlated fading channels. The results
are obtained for the cases where there is a sum power constraint on the source
and the relay or when each of the source and the relay are power-limited
individually. With adaptive power allocation, the results demonstrate the
efficiency of relay-ARQ techniques in different conditions.Comment: Accepted for publication in IEEE Trans. Veh. Technol. 201
On an HARQ-based Coordinated Multi-point Network using Dynamic Point Selection
This paper investigates the performance of coordinated multi-point (CoMP) networks in the presence of hybrid automatic repeat request (HARQ) feedback. With an information theoretic point of view, the throughput and the outage probability of different HARQ protocols are studied for slow-fading channels. The results are compared with the ones obtained in the presence of repetition codes and basic HARQ, or when there is no channel state information available at the base stations. The analytical and numerical results demonstrate the efficiency of the CoMP-HARQ techniques in different conditions
Nuberu : Reliable RAN Virtualization in Shared Platforms
RAN virtualization will become a key technology for the last mile of next-generation mobile networks driven by initiatives such as the O-RAN alliance. However, due to the computing fluctuations inherent to wireless dynamics and resource contention in shared computing infrastructure, the price to migrate from dedicated to shared platforms may be too high. Indeed, we show in this paper that the baseline architecture of a base stationÂżs distributed unit (DU) collapses upon moments of deficit in computing capacity. Recent solutions to accelerate some signal processing tasks certainly help but do not tackle the core problem: a DU pipeline that requires predictable computing to provide carrier-grade reliability. We present Nuberu, a novel pipeline architecture for 4G/5G DUs specifically engineered for non-deterministic computing platforms. Our design has one key objective to attain reliability: to guarantee a minimum set of signals that preserve synchronization between the DU and its users during computing capacity shortages and, provided this, maximize network throughput. To this end, we use techniques such as tight deadline control, jitter-absorbing buffers, predictive HARQ, and congestion control. Using an experimental prototype, we show that Nuberu attains 95% of the theoretical spectrum efficiency in hostile environments, where state-of-art approaches lose connectivity, and at least 80% resource savingsWe would like to thank our shepherd and reviewers for their valuable comments and feedback. This work has been supported by the European Commission through Grant No. 101017109 (DAEMON project) and Grant No. 101015956 (Hexa-X project), and the CERCA Programme/Generalitat de Catalunya
Green Communication via Power-optimized HARQ Protocols
Recently, efficient use of energy has become an essential research topic for
green communication. This paper studies the effect of optimal power controllers
on the performance of delay-sensitive communication setups utilizing hybrid
automatic repeat request (HARQ). The results are obtained for repetition time
diversity (RTD) and incremental redundancy (INR) HARQ protocols. In all cases,
the optimal power allocation, minimizing the outage-limited average
transmission power, is obtained under both continuous and bursting
communication models. Also, we investigate the system throughput in different
conditions. The results indicate that the power efficiency is increased
substantially, if adaptive power allocation is utilized. For instance, assume
Rayleigh-fading channel, a maximum of two (re)transmission rounds with rates
nats-per-channel-use and an outage probability constraint
. Then, compared to uniform power allocation, optimal power
allocation in RTD reduces the average power by 9 and 11 dB in the bursting and
continuous communication models, respectively. In INR, these values are
obtained to be 8 and 9 dB, respectively.Comment: Accepted for publication on IEEE Transactions on Vehicular Technolog
On the Performance of MIMO-ARQ Systems with Channel State Information at the Receiver
This paper investigates the performance of multiple-input-multiple-output (MIMO) systems in the presence of automatic repeat request (ARQ) feedback. We show that, for a large range of performance metrics, the data transmission efficiency of the ARQ schemes is determined by a set of parameters which are scheme-dependent and not metric-dependent. Then, the results are used to study different aspects of MIMO-ARQ such as the effect of nonlinear power amplifiers, large-scale MIMO-ARQ, adaptive power allocation and different data communication models. The results, which are valid for various forward and feedback channel models, show the efficiency of the MIMO-ARQ techniques in different conditions
Green communication via Type-I ARQ: Finite block-length analysis
This paper studies the effect of optimal power allocation on the performance
of communication systems utilizing automatic repeat request (ARQ). Considering
Type-I ARQ, the problem is cast as the minimization of the outage probability
subject to an average power constraint. The analysis is based on some recent
results on the achievable rates of finite-length codes and we investigate the
effect of codewords length on the performance of ARQ-based systems. We show
that the performance of ARQ protocols is (almost) insensitive to the length of
the codewords, for codewords of length channel uses. Also, optimal
power allocation improves the power efficiency of the ARQ-based systems
substantially. For instance, consider a Rayleigh fading channel, codewords of
rate 1 nats-per-channel-use and outage probability Then, with a
maximum of 2 and 3 transmissions, the implementation of power-adaptive ARQ
reduces the average power, compared to the open-loop communication setup, by 17
and 23 dB, respectively, a result which is (almost) independent of the
codewords length. Also, optimal power allocation increases the diversity gain
of the ARQ protocols considerably.Comment: Accepted for publication in GLOBECOM 201
Collaborative HARQ Schemes for Cooperative Diversity Communications in Wireless Networks
Wireless technology is experiencing spectacular developments, due to the emergence of interactive and digital multimedia applications as well as rapid advances in the highly integrated systems. For the next-generation mobile communication systems, one can expect wireless connectivity between any devices at any time and anywhere with a range of multimedia contents. A key requirement in such systems is the availability of high-speed and robust communication links. Unfortunately, communications over wireless channels inherently suffer from a number of fundamental physical limitations, such as multipath fading, scarce radio spectrum, and limited battery power supply for mobile devices. Cooperative diversity (CD) technology is a promising solution for future wireless communication systems to achieve broader coverage and to mitigate wireless channelsâ impairments without the need to use high power at the transmitter. In general, cooperative relaying systems have a source node multicasting a message to a number of cooperative relays, which in turn resend a processed version message to an intended destination node. The destination node combines the signal received from the relays, and takes into account the sourceâs original signal to decode the message. The CD communication systems exploit two fundamental features of the wireless medium: its broadcast nature and its ability to achieve diversity through independent channels. A variety of relaying protocols have been considered and utilized in cooperative wireless networks. Amplify and forward (AAF) and decode and forward (DAF) are two popular protocols, frequently used in the cooperative systems. In the AAF mode, the relay amplifies the received signal prior to retransmission. In the DAF mode, the relay fully decodes the received signal, re-encodes and forwards it to the destination. Due to the retransmission without decoding, AAF has the shortcoming that noise accumulated in the received signal is amplified at the transmission. DAF suffers from decoding errors that can lead to severe error propagation. To further enhance the quality of service (QoS) of CD communication systems, hybrid Automatic Repeat-reQuest (HARQ) protocols have been proposed. Thus, if the destination requires an ARQ retransmission, it could come from one of relays rather than the source node. This thesis proposes an improved HARQ scheme with an adaptive relaying protocol (ARP). Focusing on the HARQ as a central theme, we start by introducing the concept of ARP. Then we use it as the basis for designing three types of HARQ schemes, denoted by HARQ I-ARP, HARQ II-ARP and HARQ III-ARP. We describe the relaying protocols, (both AAF and DAF), and their operations, including channel access between the source and relay, the feedback scheme, and the combining methods at the receivers. To investigate the benefits of the proposed HARQ scheme, we analyze its frame error rate (FER) and throughput performance over a quasi-static fading channel. We can compare these with the reference methods, HARQ with AAF (HARQ-AAF) and HARQ with perfect distributed turbo codes (DTC), for which correct decoding is always assumed at the relay (HARQ-perfect DTC). It is shown that the proposed HARQ-ARP scheme can always performs better than the HARQ-AAF scheme. As the signal-to-noise ratio (SNR) of the channel between the source and relay increases, the performance of the proposed HARQ-ARP scheme approaches that of the HARQ-perfect DTC scheme
Feedback Subsampling in Temporally-Correlated Slowly-Fading Channels using Quantized CSI
This paper studies the problem of feedback subsampling in temporally-correlated wireless networks utilizing quantized channel state information (CSI). Under both peak and average power constraints, the system data transmission efficiency is studied in two scenarios. First, we focus on the case where the codewords span one fading block. In the second scenario, the throughput is determined for piecewise slowly-fading channels where the codewords are so long that a finite number of correlated gain realizations are experienced during each codeword transmission. Considering different temporal correlation conditions in both scenarios, substantial throughput increment is observed with feedback rates well below 1 bit per slot
- âŠ