942 research outputs found
Software Defined Networks based Smart Grid Communication: A Comprehensive Survey
The current power grid is no longer a feasible solution due to
ever-increasing user demand of electricity, old infrastructure, and reliability
issues and thus require transformation to a better grid a.k.a., smart grid
(SG). The key features that distinguish SG from the conventional electrical
power grid are its capability to perform two-way communication, demand side
management, and real time pricing. Despite all these advantages that SG will
bring, there are certain issues which are specific to SG communication system.
For instance, network management of current SG systems is complex, time
consuming, and done manually. Moreover, SG communication (SGC) system is built
on different vendor specific devices and protocols. Therefore, the current SG
systems are not protocol independent, thus leading to interoperability issue.
Software defined network (SDN) has been proposed to monitor and manage the
communication networks globally. This article serves as a comprehensive survey
on SDN-based SGC. In this article, we first discuss taxonomy of advantages of
SDNbased SGC.We then discuss SDN-based SGC architectures, along with case
studies. Our article provides an in-depth discussion on routing schemes for
SDN-based SGC. We also provide detailed survey of security and privacy schemes
applied to SDN-based SGC. We furthermore present challenges, open issues, and
future research directions related to SDN-based SGC.Comment: Accepte
Segment Routing: a Comprehensive Survey of Research Activities, Standardization Efforts and Implementation Results
Fixed and mobile telecom operators, enterprise network operators and cloud
providers strive to face the challenging demands coming from the evolution of
IP networks (e.g. huge bandwidth requirements, integration of billions of
devices and millions of services in the cloud). Proposed in the early 2010s,
Segment Routing (SR) architecture helps face these challenging demands, and it
is currently being adopted and deployed. SR architecture is based on the
concept of source routing and has interesting scalability properties, as it
dramatically reduces the amount of state information to be configured in the
core nodes to support complex services. SR architecture was first implemented
with the MPLS dataplane and then, quite recently, with the IPv6 dataplane
(SRv6). IPv6 SR architecture (SRv6) has been extended from the simple steering
of packets across nodes to a general network programming approach, making it
very suitable for use cases such as Service Function Chaining and Network
Function Virtualization. In this paper we present a tutorial and a
comprehensive survey on SR technology, analyzing standardization efforts,
patents, research activities and implementation results. We start with an
introduction on the motivations for Segment Routing and an overview of its
evolution and standardization. Then, we provide a tutorial on Segment Routing
technology, with a focus on the novel SRv6 solution. We discuss the
standardization efforts and the patents providing details on the most important
documents and mentioning other ongoing activities. We then thoroughly analyze
research activities according to a taxonomy. We have identified 8 main
categories during our analysis of the current state of play: Monitoring,
Traffic Engineering, Failure Recovery, Centrally Controlled Architectures, Path
Encoding, Network Programming, Performance Evaluation and Miscellaneous...Comment: SUBMITTED TO IEEE COMMUNICATIONS SURVEYS & TUTORIAL
A Survey on the Path Computation Element (PCE) Architecture
Quality of Service-enabled applications and services rely on Traffic Engineering-based (TE) Label Switched Paths (LSP) established in core networks and controlled by the GMPLS control plane. Path computation process is crucial to achieve the desired TE objective. Its actual effectiveness depends on a number of factors. Mechanisms utilized to update topology and TE information, as well as the latency between path computation and resource reservation, which is typically distributed, may affect path computation efficiency. Moreover, TE visibility is limited in many network scenarios, such as multi-layer, multi-domain and multi-carrier networks, and it may negatively impact resource utilization. The Internet Engineering Task Force (IETF) has promoted the Path Computation Element (PCE) architecture, proposing a dedicated network entity devoted to path computation process. The PCE represents a flexible instrument to overcome visibility and distributed provisioning inefficiencies. Communications between path computation clients (PCC) and PCEs, realized through the PCE Protocol (PCEP), also enable inter-PCE communications offering an attractive way to perform TE-based path computation among cooperating PCEs in multi-layer/domain scenarios, while preserving scalability and confidentiality. This survey presents the state-of-the-art on the PCE architecture for GMPLS-controlled networks carried out by research and standardization community. In this work, packet (i.e., MPLS-TE and MPLS-TP) and wavelength/spectrum (i.e., WSON and SSON) switching capabilities are the considered technological platforms, in which the PCE is shown to achieve a number of evident benefits
Survivability algorithms in MPLS and WDM optical networks
In modern ultra-wide bandwidth, high speed and high reliable communication networks, the failure of network components including equipment (such as routers) and transmission media (such as fibers) may cause a huge volume of data loss. Therefore network survivability mechanisms, by which the disrupted traffic upon failures can be restored, are crucial in network design and deserve thorough investigation. In this thesis, we propose some survivability approaches to survive failures in MPLS and WDM optical networks. MPLS is a promising technology that enables much faster failure recovery than conventional IP rerouting in IP networks. While the traditional MPLS path-based protection scheme is capacity efficient, it is relatively slow in restoration; on the other hand, while traditional MPLS link-based scheme has fast restoration speed, its capacity efficiency is low. In this thesis, we propose a new restoration scheme called UNIFR, which can provide fast restoration as link-based scheme while achieving better capacity efficiency than link-based scheme. We present a MPLS resilience framework that supports UNIFR and give two ILP formulations to solve the spare capacity optimization problem for UNIFR-based restoration model. Simulation study shows that the capacity efficiency of UNIFR-based model is much better than that of link-based model and close to that of path-based model. In WDM optical networks, although lots of pervious works have been done in both protection and restoration survivability techniques, to our best knowledge, little study focuses on improving the dynamic restoration success ratio. To address this problem, we first identify two restoration blocking types called primary holding and mutual competition. To address primary holding, we propose a dynamic routing and wavelength assignment algorithm for connection establishment that takes the future possible failures into consideration and choose route and wavelength for the working lightpath that could lead to higher chance of successful restoration for the potential failures. To address mutual competition, we present some heuristics ideas to increase restoration success ratio. Simulation shows that our algorithms can clearly reduce the restoration blocking probability while not affecting primary blocking probability and restoration speed much
Energy management in communication networks: a journey through modelling and optimization glasses
The widespread proliferation of Internet and wireless applications has
produced a significant increase of ICT energy footprint. As a response, in the
last five years, significant efforts have been undertaken to include
energy-awareness into network management. Several green networking frameworks
have been proposed by carefully managing the network routing and the power
state of network devices.
Even though approaches proposed differ based on network technologies and
sleep modes of nodes and interfaces, they all aim at tailoring the active
network resources to the varying traffic needs in order to minimize energy
consumption. From a modeling point of view, this has several commonalities with
classical network design and routing problems, even if with different
objectives and in a dynamic context.
With most researchers focused on addressing the complex and crucial
technological aspects of green networking schemes, there has been so far little
attention on understanding the modeling similarities and differences of
proposed solutions. This paper fills the gap surveying the literature with
optimization modeling glasses, following a tutorial approach that guides
through the different components of the models with a unified symbolism. A
detailed classification of the previous work based on the modeling issues
included is also proposed
A Survey on the Contributions of Software-Defined Networking to Traffic Engineering
Since the appearance of OpenFlow back in 2008, software-defined networking (SDN) has gained momentum. Although there are some discrepancies between the standards developing organizations working with SDN about what SDN is and how it is defined, they all outline traffic engineering (TE) as a key application. One of the most common objectives of TE is the congestion minimization, where techniques such as traffic splitting among multiple paths or advanced reservation systems are used. In such a scenario, this manuscript surveys the role of a comprehensive list of SDN protocols in TE solutions, in order to assess how these protocols can benefit TE. The SDN protocols have been categorized using the SDN architecture proposed by the open networking foundation, which differentiates among data-controller plane interfaces, application-controller plane interfaces, and management interfaces, in order to state how the interface type in which they operate influences TE. In addition, the impact of the SDN protocols on TE has been evaluated by comparing them with the path computation element (PCE)-based architecture. The PCE-based architecture has been selected to measure the impact of SDN on TE because it is the most novel TE architecture until the date, and because it already defines a set of metrics to measure the performance of TE solutions. We conclude that using the three types of interfaces simultaneously will result in more powerful and enhanced TE solutions, since they benefit TE in complementary ways.European Commission through the Horizon 2020 Research and Innovation Programme (GN4) under Grant 691567
Spanish Ministry of Economy and Competitiveness under the Secure Deployment of Services Over SDN and NFV-based Networks Project S&NSEC under Grant TEC2013-47960-C4-3-
- …