Green communication in energy renewable wireless mesh networks: routing, rate control, and power allocation

PublishedJournal Article© 2014 IEEE. The increasing demand for wireless services has led to a severe energy consumption problem with the rising of greenhouse gas emission. While the renewable energy can somehow alleviate this problem, the routing, flow rate, and power still have to be well investigated with the objective of minimizing energy consumption in multi-hop energy renewable wireless mesh networks (ER-WMNs). This paper formulates the problem of network-wide energy consumption minimization under the network throughput constraint as a mixed-integer nonlinear programming problem by jointly optimizing routing, rate control, and power allocation. Moreover, the min-max fairness model is applied to address the fairness issue because the uneven routing problem may incur the sharp reduction of network performance in multi-hop ER-WMNs. Due to the high computational complexity of the formulated mathematical programming problem, an energy-aware multi-path routing algorithm (EARA) is also proposed to deal with the joint control of routing, flow rate, and power allocation in practical multi-hop WMNs. To search the optimal routing, it applies a weighted Dijkstra's shortest path algorithm, where the weight is defined as a function of the power consumption and residual energy of a node. Extensive simulation results are presented to show the performance of the proposed schemes and the effects of energy replenishment rate and network throughput on the network lifetime

Future strategic plan analysis for integrating distributed renewable generation to smart grid through wireless sensor network: Malaysia prospect

AbstractIntegration of Distributed Renewable Generation (DRG) to the future Smart Grid (SG) is one of the important considerations that is highly prioritized in the SG development roadmap by most of the countries including Malaysia. The plausible way of this integration is the enhancement of information and bidirectional communication infrastructure for energy monitoring and controlling facilities. However, urgency of data delivery through maintaining critical time condition is not crucial in these facilities. In this paper, we have surveyed state-of-the-art protocols for different Wireless Sensor Networks (WSNs) with the aim of realizing communication infrastructure for DRG in Malaysia. Based on the analytical results from surveys, data communication for DRG should be efficient, flexible, reliable, cost effective, and secured. To meet this achievement, IEEE802.15.4 supported ZigBee PRO protocol together with sensors and embedded system is shown as Wireless Sensor (WS) for DRG bidirectional network with prospect of attaining data monitoring facilities. The prospect towards utilizing ZigBee PRO protocol can be a cost effective option for full integration of intelligent DRG and small scale Building-Integrated Photovoltaic (BIPV)/Feed-in-Tariff (FiT) under SG roadmap (Phase4: 2016–2017) conducted by Malaysia national utility company, Tenaga Nasional Berhad (TNB). Moreover, we have provided a direction to utilize the effectiveness of ZigBee-WS network with the existing optical communication backbone for data importing from the end DRG site to the TNB control center. A comparative study is carried out among developing countries on recent trends of SG progress which reveals that some common projects like smart metering and DRG integration are on priority

Design of a wireless monitoring system based on the ZigBee protocol for photovoltaic systems

This thesis was submitted for the degree of Master of Philosophy and awarded by Brunel University.This work deals with the possibility of using the promising technology of wireless sensor networks (WSN) in the field of photovoltaic (PV) plant supervising and monitoring. The knowledge of the status and good working condition of each PV module separately as well as of any component of the PV system will guide in a more efficient way of power management. This work will concentrate on monitoring and controlling as well as healthy operation control of PV panels separately. Data logging will be also available and can be used for reference or statistical purposes. The nature of wireless sensor networks (WSN) offers several advantages on monitoring and controlling applications over other traditional technologies including self-healing, self-organization, and flexibility. The versatility, ease of use, and reliability of a mesh network topology offered by the ZigBee technology that is based on the IEEE 802.15.4 standard, are used in this work to offer the maximum of its capabilities on the system being presented. A set of sensors attached on each PV panel are connected to a wireless ZigBee module. Each PV panel has its own ZigBee device located at its back side. All ZigBee devices forms a network with all the necessary devices of the ZigBee protocol included, such as end devises (RFD), a router (FFD), and a coordinator (COO). An extra ZigBee device might optionally be used to serve the whole system as an Ethernet gateway for making the system able to be connected to the internet. The factors that are being monitored are the panel‟s temperature, the output voltage, and output current. At the router device that operates as a parent for all the end devices, extra monitored factors are the air dust concentration, current irradiance and also the angle of the PV array (in the case of tracking system use).Two controlling outputs (relays) are located at the router device offering the capability of controlling the motors or the actuators of a tracking system

Quality of service provision in mobile multimedia - a survey

The prevalence of multimedia applications has drastically increased the amount of multimedia data. With the drop of the hardware cost, more and more mobile devices with higher capacities are now used. The widely deployed wireless LAN and broadband wireless networks provide the ubiquitous network access for multimedia applications. Provision of Quality of Service (QoS) is challenging in mobile ad hoc networks because of the dynamic characteristics of mobile networks and the limited resources of the mobile devices. The wireless network is not reliable due to node mobility, multi-access channel and multi-hop communication. In this paper, we provide a survey of QoS provision in mobile multimedia, addressing the technologies at different network layers and cross-layer design. This paper focuses on the QoS techniques over IEEE 802.11e networks. We also provide some thoughts about the challenges and directions for future research

A wireless 802.11 condition monitoring sensor for electrical substation environments

The work reported in this thesis is concerned with the design, development and testing of a wireless 802.11 condition monitoring sensor for an electrical substation environments. The work includes a comprehensive literature review and the design and development of a novel continuous wireless data acquisition sensor. Laboratory and field tests were performed to evaluate the data acquisition performance of the developed wireless sensor. The sensor‟s wireless immunity to interference performance was also evaluated in laboratory and field tests. The literature survey reviews current condition monitoring practices in electrical substation environments with a focus on monitoring high voltage insulators and substation earth impedance. The data acquisition performance of the wireless sensor was tested in a laboratory using two artificially polluted insulators, in a fog chamber that applied clean fog. Analysis of the test results were found to be in good agreement with those recorded directly through a data acquisition card and transmitted via coaxial cable. The wireless impedance measurement of a 275kV transmission earth tower base field test was also performed and was found to be in agreement with previous published results from standard earth measurements. The sensor‟s wireless interference performance was evaluated at a field test site when no high voltage experiments were taking place. The sensors wireless interference performance was then tested in a laboratory environment before and during high voltage tests taking place. The results of these tests were compared to each other and to published results. These tests demonstrate the suitability of the sensor‟s design and its immunity to interference. The experimental work conducted using the developed wireless sensor has led to an understanding that continuous wireless data acquisition is possible in high voltage environments. However, novel condition monitoring systems that make use of such wireless sensors, have to take into account data losses and delays adequately. Furthermore, a solar power source was designed and constructed to be used for outdoor substation applications and the solar battery charging performance of the wireless sensor was tested in a solar laboratory.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Microwave Antennas for Energy Harvesting Applications

In the last few years, the demand for power has increased; therefore, the need for alternate energy sources has become essential. Sources of fossil fuels are finite, are costly, and causes environmental hazard. Sustainable, environmentally benign energy can be derived from nuclear fission or captured from ambient sources. Large-scale ambient energy is widely available and large-scale technologies are being developed to efficiently capture it. At the other end of the scale, there are small amounts of wasted energy that could be useful if captured. There are various types of external energy sources such as solar, thermal, wind, and RF energy. Energy has been harvested for different purposes in the last few recent years. Energy harvesting from inexhaustible sources with no adverse environmental effect can provide unlimited energy for harvesting in a way of powering an embedded system from the environment. It could be RF energy harvesting by using antennas that can be held on the car glass or building, or in any places. The abundant RF energy is harvested from surrounding sources. This chapter focuses on RF energy harvesting in which the abundant RF energy from surrounding sources, such as nearby mobile phones, wireless LANs (WLANs), Wi-Fi, FM/AM radio signals, and broadcast television signals or DTV, is captured by a receiving antenna and rectified into a usable DC voltage. A practical approach for RF energy harvesting design and management of the harvested and available energy for wireless sensor networks is to improve the energy efficiency and large accepted antenna gain. The emerging self-powered systems challenge and dictate the direction of research in energy harvesting (EH). There are a lot of applications of energy harvesting such as wireless weather stations, car tire pressure monitors, implantable medical devices, traffic alert signs, and mars rover. A lot of researches are done to create several designs of rectenna (antenna and rectifier) that meet various objectives for use in RF energy harvesting, whatever opaque or transparent. However, most of the designed antennas are opaque and prevent the sunlight to pass through, so it is hard to put it on the car glass or window. Thus, there should be a design for transparent antenna that allows the sunlight to pass through. Among various antennas, microstrip patch antennas are widely used because they are low profile, are lightweight, and have planar structure. Microstrip patch-structured rectennas are evaluated and compared with an emphasis on the various methods adopted to obtain a rectenna with harmonic rejection functionality, frequency, and polarization selectivity. Multiple frequency bands are tapped for energy harvesting, and this aspect of the implementation is one of the main focus points. The bands targeted for harvesting in this chapter will be those that are the most readily available to the general population. These include Wi-Fi hotspots, as well as cellular (900/850 MHz band), personal communications services (1800/1900 MHz band), and sources of 2.4 GHz and WiMAX (2.3/3.5 GHz) network transmitters. On the other hand, at high frequency, advances in nanotechnology have led to the development of semiconductor-based solar cells, nanoscale antennas for power harvesting applications, and integration of antennas into solar cells to design low-cost light-weight systems. The role of nanoantenna system is transforming thermal energy provided by the sun to electricity. Nanoantennas target the mid-infrared wavelengths where conventional photo voltaic cells are inefficient. However, the concept of using optical rectenna for harvesting solar energy was first introduced four decades ago. Recently, it has invited a surge of interest, with different laboratories around the world working on various aspects of the technology. The result is a technology that can be efficient and inexpensive, requiring only low-cost materials. Unlike conventional solar cells that harvest energy in visible light frequency range. Since the UV frequency range is much greater than visible light, we consider the quantum mechanical behavior of a driven particle in nanoscale antennas for power harvesting applications

A wireless 802.11 condition monitoring sensor for electrical substation environments

The work reported in this thesis is concerned with the design, development and testing of a wireless 802.11 condition monitoring sensor for an electrical substation environments. The work includes a comprehensive literature review and the design and development of a novel continuous wireless data acquisition sensor. Laboratory and field tests were performed to evaluate the data acquisition performance of the developed wireless sensor. The sensor‟s wireless immunity to interference performance was also evaluated in laboratory and field tests. The literature survey reviews current condition monitoring practices in electrical substation environments with a focus on monitoring high voltage insulators and substation earth impedance. The data acquisition performance of the wireless sensor was tested in a laboratory using two artificially polluted insulators, in a fog chamber that applied clean fog. Analysis of the test results were found to be in good agreement with those recorded directly through a data acquisition card and transmitted via coaxial cable. The wireless impedance measurement of a 275kV transmission earth tower base field test was also performed and was found to be in agreement with previous published results from standard earth measurements. The sensor‟s wireless interference performance was evaluated at a field test site when no high voltage experiments were taking place. The sensors wireless interference performance was then tested in a laboratory environment before and during high voltage tests taking place. The results of these tests were compared to each other and to published results. These tests demonstrate the suitability of the sensor‟s design and its immunity to interference. The experimental work conducted using the developed wireless sensor has led to an understanding that continuous wireless data acquisition is possible in high voltage environments. However, novel condition monitoring systems that make use of such wireless sensors, have to take into account data losses and delays adequately. Furthermore, a solar power source was designed and constructed to be used for outdoor substation applications and the solar battery charging performance of the wireless sensor was tested in a solar laboratory

Interference-aware coordinated power allocation in autonomous Wi-Fi environment

Self-managed access points (APs) with growing intelligence can optimize their own performances but pose potential negative impacts on others without energy ef ciency. In this paper, we focus on modeling the coordinated interaction among interest-independent and self-con gured APs, and conduct the power allocation case study in the autonomous Wi-Fi scenario. Speci cally, we build a `coordination Wi-Fi platform (CWP), a public platform for APs interacting with each other. OpenWrt-based APs in the physical world are mapped to virtual agents (VAs) in CWP, which communicate with each other through a standard request-reply process de ned as AP talk protocol (ATP).With ATP, an active interference measurement methodology is proposed re ecting both in-range interference and hidden terminal interference, and the Nash bargaining-based power control is further formulated for interference reductions. CWP is deployed in a real of ce environment, where coordination interactions between VAs can bring a maximum 40-Mb/s throughput improvement with the Nash bargaining-based power control in the multi-AP experiments

Wireless sensor network for health monitoring

Wireless Sensor Network (WSN) is becoming a significant enabling technology for a wide variety of applications. Recent advances in WSN have facilitated the realization of pervasive health monitoring for both homecare and hospital environments. Current technological advances in sensors, power-efficient integrated circuits, and wireless communication have allowed the development of miniature, lightweight, low-cost, and smart physiological sensor nodes. These nodes are capable of sensing, processing, and communicating one or more vital signs. Furthermore, they can be used in wireless personal area networks (WPANs) or wireless body sensor networks (WBSNs) for health monitoring. Many studies were performed and/or are under way in order to develop flexible, reliable, secure, real-time, and power-efficient WBSNs suitable for healthcare applications. To efficiently control and monitor a patient’s status as well as to reduce the cost of power and maintenance, IEEE 802.15.4/ZigBee, a communication standard for low-power wireless communication, is developed as a new efficient technology in health monitoring systems. The main contribution of this dissertation is to provide a modeling, analysis, and design framework for WSN health monitoring systems. This dissertation describes the applications of wireless sensor networks in the healthcare area and discusses the related issues and challenges. The main goal of this study is to evaluate the acceptance of the current wireless standard for enabling WSNs for healthcare monitoring in real environment. Its focus is on IEEE 802.15.4/ZigBee protocols combined with hardware and software platforms. Especially, it focuses on Carrier Sense Multiple Access with Collision Avoidance mechanism (CSMA/CA) algorithms for reliable communication in multiple accessing networks. The performance analysis metrics are established through measured data and mathematical analysis. This dissertation evaluates the network performance of the IEEE 802.15.4 unslotted CSMA/CA mechanism for different parameter settings through analytical modeling and simulation. For this protocol, a Markov chain model is used to derive the analytical expression of normalized packet transmission, reliability, channel access delay, and energy consumption. This model is used to describe the stochastic behavior of random access and deterministic behavior of IEEE 802.15.4 CSMA/CA. By using it, the different aspects of health monitoring can be analyzed. The sound transmission of heart beat with other smaller data packet transmission is studied. The obtained theoretical analysis and simulation results can be used to estimate and design the high performance health monitoring systems