Schedulability-Driven Frame Packing for Multi-Cluster Distributed Embedded Systems

We present an approach to frame packing for multi-cluster distributed embedded systems consisting of time-triggered and event-triggered clusters, interconnected via gateways. In our approach, the application messages are packed into frames such that the application is schedulable. Thus, we have also proposed a schedulability analysis for applications consisting of mixed event-triggered and time-triggered processes and messages, and a worst case queuing delay analysis for the gateways, responsible for routing inter-cluster traffic. Optimization heuristics for frame packing aiming at producing a schedulable system have been proposed. Extensive experiments and a real-life example show the efficiency of our frame-packing approach

Dynamic core VNT adaptability based on predictive metro-flow traffic models

© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.MPLS-over-optical virtual network topologies (VNTs) can be adapted to near-future traffic matrices based on predictive models that are estimated by applying data analytics on monitored origin-destination (OD) traffic. However, the deployment of independent SDN controllers for core and metro segments can bring large inefficiencies to this core network reconfiguration based on traffic prediction when traffic flows from metro areas are rerouted to different ingress nodes in the core. In such cases, OD traffic patterns in the core might severely change, thus affecting the quality of the predictive OD models. New traffic model re-estimation usually takes a long time, during which no predictive capabilities are available for the network operator. To alleviate this problem, we propose to extend data analytics to metro networks to obtain predictive models for the metro flows; by knowing how these flows are aggregated into OD pairs in the core, we can also aggregate their predictive models, thus accurately predicting OD traffic and therefore enabling core VNT reconfiguration. To obtain quality metro-flow models, we propose an estimation algorithmthat processes monitored data and returns a predictive model. In addition, a flow controller is proposed for the control architecture to allow metro and core controllers to exchange metro-flow model information. The proposed model aggregation is evaluated through exhaustive simulation, and eventually experimentally assessed together with the flow controller in a testbed connecting premises in CNIT (Pisa, Italy) and UPC (Barcelona, Spain).Peer ReviewedPostprint (author's final draft

Co-design of Security Aware Power System Distribution Architecture as Cyber Physical System

The modern smart grid would involve deep integration between measurement nodes, communication systems, artificial intelligence, power electronics and distributed resources. On one hand, this type of integration can dramatically improve the grid performance and efficiency, but on the other, it can also introduce new types of vulnerabilities to the grid. To obtain the best performance, while minimizing the risk of vulnerabilities, the physical power system must be designed as a security aware system. In this dissertation, an interoperability and communication framework for microgrid control and Cyber Physical system enhancements is designed and implemented taking into account cyber and physical security aspects. The proposed data-centric interoperability layer provides a common data bus and a resilient control network for seamless integration of distributed energy resources. In addition, a synchronized measurement network and advanced metering infrastructure were developed to provide real-time monitoring for active distribution networks. A hybrid hardware/software testbed environment was developed to represent the smart grid as a cyber-physical system through hardware and software in the loop simulation methods. In addition it provides a flexible interface for remote integration and experimentation of attack scenarios. The work in this dissertation utilizes communication technologies to enhance the performance of the DC microgrids and distribution networks by extending the application of the GPS synchronization to the DC Networks. GPS synchronization allows the operation of distributed DC-DC converters as an interleaved converters system. Along with the GPS synchronization, carrier extraction synchronization technique was developed to improve the system’s security and reliability in the case of GPS signal spoofing or jamming. To improve the integration of the microgrid with the utility system, new synchronization and islanding detection algorithms were developed. The developed algorithms overcome the problem of SCADA and PMU based islanding detection methods such as communication failure and frequency stability. In addition, a real-time energy management system with online optimization was developed to manage the energy resources within the microgrid. The security and privacy were also addressed in both the cyber and physical levels. For the physical design, two techniques were developed to address the physical privacy issues by changing the current and electromagnetic signature. For the cyber level, a security mechanism for IEC 61850 GOOSE messages was developed to address the security shortcomings in the standard

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

Fully automated urban traffic system

The replacement of the driver with an automatic system which could perform the functions of guiding and routing a vehicle with a human's capability of responding to changing traffic demands was discussed. The problem was divided into four technological areas; guidance, routing, computing, and communications. It was determined that the latter three areas being developed independent of any need for fully automated urban traffic. A guidance system that would meet system requirements was not being developed but was technically feasible

A Review of Priority Assignment in Real-Time Systems

It is over 40 years since the first seminal work on priority assignment for real-time systems using fixed priority scheduling. Since then, huge progress has been made in the field of real-time scheduling with more complex models and schedulability analysis techniques developed to better represent and analyse real systems. This tutorial style review provides an in-depth assessment of priority assignment techniques for hard real-time systems scheduled using fixed priorities. It examines the role and importance of priority in fixed priority scheduling in all of its guises, including: preemptive and non-pre-emptive scheduling; covering single- and multi-processor systems, and networks. A categorisation of optimal priority assignment techniques is given, along with the conditions on their applicability. We examine the extension of these techniques via sensitivity analysis to form robust priority assignment policies that can be used even when there is only partial information available about the system. The review covers priority assignment in a wide variety of settings including: mixed-criticality systems, systems with deferred pre-emption, and probabilistic real-time systems with worstcase execution times described by random variables. It concludes with a discussion of open problems in the area of priority assignment