Extending k-Coverage Lifetime of Wireless Sensor Networks Using Mobile Sensor Nodes

WiMob2009 : IEEE International Conference on Wireless and Mobile Computing, Networking and Communications , Oct 12-14, 2009 , Marrakech, MoroccoOne of the important issues in wireless sensor network (WSN) is to k-cover the target sensing field and to extend its lifetime. We propose a method to k-cover the field and maximize the WSN lifetime by moving mobile sensor nodes to appropriate positions for a WSN consisting of both static and mobile sensor nodes which periodically collect environmental information. Our target problem is NP-hard. So, we propose a genetic algorithm (GA) based scheme to find a near optimal solution in practical time. In order to speed up the calculation, we devised a method to check a sufficient condition of k-coverage of the field. For the problem that nodes near the sink node have to forward the data from farther nodes, we make a tree where the amount of communication traffic is balanced among all nodes, and add this tree to the initial candidate solutions of our GAbased algorithm. Through computer simulations, we confirmed that our method achieves much longer k-coverage lifetime than conventional methods for 100 to 300 node WSNs

Optimal coverage multi-path scheduling scheme with multiple mobile sinks for WSNs

Wireless Sensor Networks (WSNs) are usually formed with many tiny sensors which are randomly deployed within sensing field for target monitoring. These sensors can transmit their monitored data to the sink in a multi-hop communication manner. However, the ‘hot spots’ problem will be caused since nodes near sink will consume more energy during forwarding. Recently, mobile sink based technology provides an alternative solution for the long-distance communication and sensor nodes only need to use single hop communication to the mobile sink during data transmission. Even though it is difficult to consider many network metrics such as sensor position, residual energy and coverage rate etc., it is still very important to schedule a reasonable moving trajectory for the mobile sink. In this paper, a novel trajectory scheduling method based on coverage rate for multiple mobile sinks (TSCR-M) is presented especially for large-scale WSNs. An improved particle swarm optimization (PSO) combined with mutation operator is introduced to search the parking positions with optimal coverage rate. Then the genetic algorithm (GA) is adopted to schedule the moving trajectory for multiple mobile sinks. Extensive simulations are performed to validate the performance of our proposed method

Lifetime Improvement in Wireless Sensor Networks via Collaborative Beamforming and Cooperative Transmission

Collaborative beamforming (CB) and cooperative transmission (CT) have recently emerged as communication techniques that can make effective use of collaborative/cooperative nodes to create a virtual multiple-input/multiple-output (MIMO) system. Extending the lifetime of networks composed of battery-operated nodes is a key issue in the design and operation of wireless sensor networks. This paper considers the effects on network lifetime of allowing closely located nodes to use CB/CT to reduce the load or even to avoid packet-forwarding requests to nodes that have critical battery life. First, the effectiveness of CB/CT in improving the signal strength at a faraway destination using energy in nearby nodes is studied. Then, the performance improvement obtained by this technique is analyzed for a special 2D disk case. Further, for general networks in which information-generation rates are fixed, a new routing problem is formulated as a linear programming problem, while for other general networks, the cost for routing is dynamically adjusted according to the amount of energy remaining and the effectiveness of CB/CT. From the analysis and the simulation results, it is seen that the proposed method can reduce the payloads of energy-depleting nodes by about 90% in the special case network considered and improve the lifetimes of general networks by about 10%, compared with existing techniques.Comment: Invited paper to appear in the IEE Proceedings: Microwaves, Antennas and Propagation, Special Issue on Antenna Systems and Propagation for Future Wireless Communication

A Coverage Monitoring algorithm based on Learning Automata for Wireless Sensor Networks

To cover a set of targets with known locations within an area with limited or prohibited ground access using a wireless sensor network, one approach is to deploy the sensors remotely, from an aircraft. In this approach, the lack of precise sensor placement is compensated by redundant de-ployment of sensor nodes. This redundancy can also be used for extending the lifetime of the network, if a proper scheduling mechanism is available for scheduling the active and sleep times of sensor nodes in such a way that each node is in active mode only if it is required to. In this pa-per, we propose an efficient scheduling method based on learning automata and we called it LAML, in which each node is equipped with a learning automaton, which helps the node to select its proper state (active or sleep), at any given time. To study the performance of the proposed method, computer simulations are conducted. Results of these simulations show that the pro-posed scheduling method can better prolong the lifetime of the network in comparison to similar existing method