10,705 research outputs found
Recommended from our members
Experimental design with integrated temperature sensors in MEMS: an example of application for rarefied gases
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.This paper presents a new MEMS experimental device with integrated temperature sensors.
Conventional silicon planar techniques for the fabrication of microelectronic sensors have been used to realize a particular layout, which does not limit the material of the microstructures it can be used with. The study of rarefied gases has been chosen as case study for the validation of the local measuring system. In this work the attention will be focused on the description of the sensor functioning principles and on the presentation of the preliminary results obtained during the calibration procedures. The tests showed promising results for a future development of the sensor design.The European Community’s Seventh Framework Program (FP7/2007-20013) under grant agreement no 215504
Cantilever micro-rheometer for the dcharacterization of sugar solutions
The volume required for the rheological characterization of fluids can be minimized by using micromechanical cantilevers as viscosity sensors. Here, a simple measurement tool for the characterization of sugar solutions is proposed. The sensor consists of a micromechanical cantilever as used in an atomic force microscopy which is integrated into a closed fluid handling system. Fluid properties are derived from an analysis of the power spectral density of the fluctuations of the cantilever deflection signal. The data acquisition system is operated with standard consumer computer components, which limits the costs for the hardware. Measurements with different sugar solutions indicate that the sensor system provides reliable viscosity values for sugar concentrations as they occur in biological systems. The viscosities of the sugar solutions could be evaluated with an error smaller than 5%
Recommended from our members
Carbon Catcher Design Report
Overview. The design of the overall Carbon Catcher project can be separated into four distinct systems, each of which is assigned a specialized committee. The committee names and responsibilities are listed below:
Air Mover
The overall goal for the Air Mover committee is the design of the turbine assembly. As the overall goal of the project is to collect and separate carbon dioxide from the air, one of the most important parts is to actually get the air to pass through the carbon-catching
membrane. Passive air would not give a significant enough yield rate to make the carbon dioxide collection rate impactful, thus air must be sucked through a vacuum/turbine.
Membrane
The goal of Membrain is to create a membrane that can filter out CO2 through various methods. These methods are limited, due to there being such variety, to certain techniques and membrane material types that have been decided, prior, by the committee. Most membranes will be geared towards utilizing temperature and pressure along with gaseous speed and flow rate. In addition, examining certain treatments, such as regeneration of material, and replacements will be looked into as well, to see how it fares in sustainability.
Carbon Storer
The Carbon Storer committee will design a store and transport system for fluid CO2 after it is extracted from the atmosphere. Primary considerations include geological solutions, cost-effective materials, and analysis methods to improve overall capacity and efficiency. Additionally, the committee will select an environmentally and economically sustainable method of recycling the captured CO2.
PyControl
The PyControl committee will design a series of sensors and actuators, which will primarily support the sequestration and pipeline systems present in the Carbon Storer Committee and direct air capture system in Air Mover. The design can be broken into four control layers: Input/Output, Field Controllers, Data, and Supervisory.
Goal
The overarching goal of Carbon Catcher is to design a cost-effective, scalable atmospheric carbon dioxide removal system that is capable of being deployed in a variety of urban environments and may fit a variety of different customer requirements or requests
Surface Modification of Polyimide Films for Inkjet-Printing of Flexible Electronic Devices
Kapton polyimide films are one of the most commonly used flexible and robust substrates for flexible electronic devices due to their excellent thermal, chemical, mechanical, and electrical properties. However, such films feature an inert and highly hydrophobic surface that inhibits the deposition of functional materials with water-based fluids (solutions, suspensions, inkjet inks, etc.), which raise the need for their surface modification to reduce their inherent surface inertness and/or hydrophobicity in order to allow for the fabrication of electronic devices on the substrates. Traditional Kapton surface modification approaches use harsh conditions that not only cause environmental and safety problems but also compromise the structural integrity and the properties of the substrates. This chapter focuses on two recently-developed mild and environmentally friendly wet chemical approaches for surface modification of Kapton HN films. Unlike the traditional methods that target the polyimide matrix of Kapton films, these two methods target the slip additive embedded in the polyimide matrix. The surface modified Kapton films resulted from these two methods allowed for not only great printability of both water- and organic solvent-based inks (thus facilitating the full-inkjet-printing of entire flexible electronic devices) but also strong adhesion between the inkjet-printed traces and the substrate films
Recommended from our members
Team One Carbon Catcher Design Report
Overview
The burning of fossil fuels largely contributes to the increase of CO2 in the atmosphere. The US Department of Transportation alone contributed almost 6 million metric tons of carbon dioxide emissions in 2018 (EIA). Due to this, this report proposes recycling captured CO2 into a base for cleaner burning fuel in order to reduce emissions from the transportation industry and many others, which has the potential to impact many areas.
Extraction of atmospheric CO2 is possible through a membrane filtration system based on traditional nitrogen generation. The passive filtration system autonomously separates the CO2 from other air components, thereby reducing energy consumption. The system's working sensors and actuators utilize similar energy saving strategies, such as distributing cloud-computing services over multiple servers and mainframes to reduce computing power. The movement of air is directed by a scalable fan device, which is presented as a modular design to allow customization of fan parts to specific size and installation requirements. As an integrated device, Team 1’s Carbon Catcher operates with a high efficiency in order to maximize the commercial opportunity of converting captured CO2 into cleaner fuel while also reducing CO2 emissions and the greenhouse effect.
Goal
The goal of Team 1’s Carbon Catcher project proposal is to design a cost-effective, scalable, and modular atmospheric carbon dioxide removal system that is capable of being utilized in a range of urban environments and may fit a variety of different customer requirements or requests
Aeronautical Engineering: A continuing bibliography, supplement 120
This bibliography contains abstracts for 297 reports, articles, and other documents introduced into the NASA scientific and technical information system in February 1980
Piezoelectric Transducers Based on Aluminum Nitride and Polyimide for Tactile Applications
The development of micro systems with smart sensing capabilities is paving the way to progresses in the technology for humanoid robotics. The importance of sensory feedback has been recognized the enabler of a high degree of autonomy for robotic systems. In tactile applications, it can be exploited not only to avoid objects slipping during their manipulation but also to allow safe interaction with humans and unknown objects and environments. In order to ensure the minimal deformation of an object during subtle manipulation tasks, information not only on contact forces between the object and fingers but also on contact geometry and contact friction characteristics has to be provided. Touch, unlike other senses, is a critical component that plays a fundamental role in dexterous manipulation capabilities and in the evaluation of objects properties such as type of material, shape, texture, stiffness, which is not easily possible by vision alone. Understanding of unstructured environments is made possible by touch through the determination of stress distribution in the surrounding area of physical contact. To this aim, tactile sensing and pressure detection systems should be integrated as an artificial tactile system.
As illustrated in the Chapter I, the role of external stimuli detection in humans is provided by a great number of sensorial receptors: they are specialized endings whose structure and location in the skin determine their specific signal transmission characteristics. Especially, mechanoreceptors are specialized in the conversion of the mechanical deformations caused by force, vibration or slip on skin into electrical nerve impulses which are processed and encoded by the central nervous system.
Highly miniaturized systems based on MEMS technology seem to imitate properly the large number of fast responsive mechanoreceptors present in human skin. Moreover, an artificial electronic skin should be lightweight, flexible, soft and wearable and it should be fabricated with compliant materials. In this respect a big challenge of bio-inspired technologies is the efficient application of flexible active materials to convert the mechanical pressure or stress into a usable electric signal (voltage or current).
In the emerging field of soft active materials, able of large deformation, piezoelectrics have been recognized as a really promising and attractive material in both sensing and actuation applications. As outlined in Chapter II, there is a wide choice of materials and material forms (ceramics: PZT; polycrystalline films: ZnO, AlN; polymers and copolymers: PVDF, PVDF-TrFe) which are actively piezoelectric and exhibit features more or less attractive. Among them, aluminum nitride is a promising piezoelectric material for flexible technology. It has moderate piezoelectric coefficient, when available in c-axis oriented polycrystalline columnar structure, but, at same time, it exhibits low dielectric constant, high temperature stability, large band gap, large electrical resistivity, high breakdown voltage and low dielectric loss which make it suitable for transducers and high thermal conductivity which implies low thermal drifts. The high chemical stability allows AlN to be used in humid environments. Moreover, all the above properties and its deposition method make AlN compatible with CMOS technology. Exploiting the features of the AlN, three-dimensional AlN dome-shaped cells, embedded between two metal electrodes, are proposed in this thesis. They are fabricated on general purpose Kapton™ substrate, exploiting the flexibility of the polymer and the electrical stability of the semiconductor at the same time. As matter of fact, the crystalline layers release a compressive stress over the polymer, generating three-dimensional structures with reduced stiffness, compared to the semiconductor materials.
In Chapter III, a mathematical model to calculate the residual stresses which arise because of mismatch in coefficient of thermal expansion between layers and because of mismatch in lattice constants between the substrate and the epitaxially grown films is adopted. The theoretical equation is then used to evaluate the dependence of geometrical features of the fabricated three-dimensional structures on compressive residual stress. Moreover, FEM simulations and theoretical models analysis are developed in order to qualitative explore the operation principle of curved membranes, which are labelled dome-shaped diaphragm transducers (DSDT), both as sensors and as piezo-actuators and for the related design optimization.
For the reliability of the proposed device as a force/pressure sensor and piezo-actuator, an exhaustive electromechanical characterization of the devices is carried out. A complete description of the microfabrication processes is also provided. As shown in Chapter IV, standard microfabrication techniques are employed to fabricate the array of DSDTs. The overall microfabrication process involves deposition of metal and piezoelectric films, photolithography and plasma-based dry and wet etching to pattern thin films with the desired features. The DSDT devices are designed and developed according to FEM and theoretical analysis and following the typical requirements of force/pressure systems for tactile applications.
Experimental analyses are also accomplished to extract the relationship between the compressive residual stress due to the aluminum nitride and the geometries of the devices. They reveal different deformations, proving the dependence of the geometrical features of the three-dimensional structures on residual stress. Moreover, electrical characterization is performed to determine capacitance and impedance of the DSDTs and to experimentally calculate the relative dielectric constant of sputtered AlN piezoelectric film.
In order to investigate the mechanical behaviour of the curved circular transducers, a characterization of the flexural deflection modes of the DSDT membranes is carried out. The natural frequency of vibrations and the corresponding displacements are measured by a Laser Doppler Vibrometer when a suitable oscillating voltage, with known amplitude, is applied to drive the piezo-DSDTs.
Finally, being developed for tactile sensing purpose, the proposed technology is tested in order to explore the electromechanical response of the device when impulsive dynamic and/or long static forces are applied. The study on the impulsive dynamic and long static stimuli detection is then performed by using an ad hoc setup measuring both the applied loading forces and the corresponding generated voltage and capacitance variation. These measurements allow a thorough test of the sensing abilities of the AlN-based DSDT cells.
Finally, as stated in Chapter V, the proposed technology exhibits an improved electromechanical coupling with higher mechanical deformation per unit energy compared with the conventional plate structures, when the devices are used as piezo-actuator. On the other hand, it is well suited to realize large area tactile sensors for robotics applications, opening up new perspectives to the development of latest generation biomimetic sensors and allowing the design and the fabrication of miniaturized devices
- …