Ring oscillator clocks and margins

How much margin do we have to add to the delay lines of a bundled-data circuit? This paper is an attempt to give a methodical answer to this question, taking into account all sources of variability and the existing EDA machinery for timing analysis and sign-off. The paper is based on the study of the margins of a ring oscillator that substitutes a PLL as clock generator. A timing model is proposed that shows that a 12% margin for delay lines can be sufficient to cover variability in a 65nm technology. In a typical scenario, performance and energy improvements between 15% and 35% can be obtained by using a ring oscillator instead of a PLL. The paper concludes that a synchronous circuit with a ring oscillator clock shows similar benefits in performance and energy as those of bundled-data asynchronous circuits.Peer ReviewedPostprint (author's final draft

A self-timed multipurpose delay sensor for field programmable gate arrays (FPGAs)

This paper presents a novel self-timed multi-purpose sensor especially conceived for Field Programmable Gate Arrays (FPGAs). The aim of the sensor is to measure performance variations during the life-cycle of the device, such as process variability, critical path timing and temperature variations. The proposed topology, through the use of both combinational and sequential FPGA elements, amplifies the time of a signal traversing a delay chain to produce a pulse whose width is the sensor’s measurement. The sensor is fully self-timed, avoiding the need for clock distribution networks and eliminating the limitations imposed by the system clock. One single off- or on-chip time-to-digital converter is able to perform digitization of several sensors in a single operation. These features allow for a simplified approach for designers wanting to intertwine a multi-purpose sensor network with their application logic. Employed as a temperature sensor, it has been measured to have an error of ±0.67 °C, over the range of 20–100 °C, employing 20 logic elements with a 2-point calibration

Reduction of NBTI-Induced Degradation on Ring Oscillators in FPGA

Ring Oscillators are used for variety of purposes to enhance reliability on LSIs or FPGAs. This paper introduces an aging-tolerant design structure of ring oscillators that are used in FPGAs. The structure is able to reduce NBTI-induced degradation in a ring oscillator\u27s frequency by setting PMOS transistors of look-up tables in an off-state when the oscillator is not working. The evaluation of a variety of ring oscillators using Altera Cyclone IV device (60nm technology) shows that the proposed structure is capable of controlling degradation level as well as reducing more than 37% performance degradation compared to the conventional oscillators.The 20th IEEE Pacific Rim International Symposium on Dependable Computing (PRDC 2014), Nov 19-21, 2014, Singapor

A PUF based on transient effect ring oscillator and insensitive to locking phenomenon

International audienceThis paper presents a new silicon physical unclonable function (PUF) based on a transient effect ring oscillator (TERO). The proposed PUF has state of the art PUF characteristics with a good ratio of PUF response variability to response length. Unlike RO-PUF, it is not sensitive to the locking phenomenon, which challenges the use of ring oscillators for the design of both PUF and TRNG. The novel architecture using differential structures guarantees high stability of the TERO-PUF. The area of the TERO-PUF is relatively high, but is still comparable with other PUF designs. However, since the same piece of hardware can be used for both PUF and random number generation, the proposed principle offers an interesting low area mixed solution

2017 Summer Research Symposium Abstract Book

2017 Summer volume of abstracts for science research projects conducted by students at Trinity College