A study of electrode shape configuration on the performance of die sinking EDM

This paper discusses the performance of die sinking EDM due to the shape configuration of the electrode. The effect of electrode shape on material removal rate (MRR), electrode wear rate (EWR), wear ratio (WR), and average surface roughness (Ra) has been investigated for mild steel work material and copper electrode. The shapes of the electrodes were round, square, triangular, and diamond of constant cross-sectional area of 64 mm2. Experiments were repeated for three current values of 2.5, 3.5, and 6.5 A. The highest MRR was found for round electrodes followed by square, triangular and diamond shaped electrodes. However, the highest EWR and WR were found for the diamond shaped electrodes. The minimum surface roughness was found for the round electrodes followed by square, triangular and diamond shaped electrodes. However, the influence of the shape of the electrodes on surface roughness was found to be insignificant

An integrated framework for developing generic modular reconfigurable platforms for micro manufacturing and its implementation

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The continuing trends of miniaturisation, mass customisation, globalisation and wide use of the Internet have great impacts upon manufacturing in the 21st century. Micro manufacturing will play an increasingly important role in bridging the gap between the traditional precision manufacturing and the emerging technologies like MEMS/NEMS. The key requirements for micro manufacturing in this context are hybrid manufacturing capability, modularity, reconfigurability, adaptability and energy/resource efficiency. The existing design approaches tend to have narrow scope and are largely limited to individual manufacturing processes and applications. The above requirements demand a fundamentally new approach to the future applications of micro manufacturing so as to obtain producibility, predictability and productivity covering the full process chains and value chains. A novel generic modular reconfigurable platform (GMRP) is proposed in such a context. The proposed GMRP is able to offer hybrid manufacturing capabilities, modularity, reconfigurablity and adaptivity as both an individual machine tool and a micro manufacturing system, and provides a cost effective solution to high value micro manufacturing in an agile, responsive and mass customisation manner. An integrated framework has been developed to assist the design of GMRPs due to their complexity. The framework incorporates theoretical GMRP model, design support system and extension interfaces. The GMRP model covers various relevant micro manufacturing processes and machine tool elements. The design support system includes a user-friendly interface, a design engine for design process and design evaluation, together with scalable design knowledge base and database. The functionalities of the framework can also be extended through the design support system interface, the GMRP interface and the application interface, i.e. linking to external hardware and/or software modules. The design support system provides a number of tools for the analysis and evaluation of the design solutions. The kinematic simulation of machine tools can be performed using the Virtual Reality toolbox in Matlab. A module has also been developed for the multiscale modelling, simulation and results analysis in Matlab. A number of different cutting parameters can be studied and the machining performance can be subsequently evaluated using this module. The mathematical models for a non-traditional micro manufacturing process, micro EDM, have been developed with the simulation performed using FEA. Various design theories and methodologies have been studied, and the axiomatic design theory has been selected because of its great power and simplicity. It has been applied in the conceptual design of GMRP and its design support system. The implementation of the design support system is carried out using Matlab, Java and XML technologies. The proposed GMRP and framework have been evaluated through case studies and experimental results

An integrated framework for developing generic modular reconfigurable platforms for micro manufacturing and its implementation

The continuing trends of miniaturisation, mass customisation, globalisation and wide use of the Internet have great impacts upon manufacturing in the 21st century. Micro manufacturing will play an increasingly important role in bridging the gap between the traditional precision manufacturing and the emerging technologies like MEMS/NEMS. The key requirements for micro manufacturing in this context are hybrid manufacturing capability, modularity, reconfigurability, adaptability and energy/resource efficiency. The existing design approaches tend to have narrow scope and are largely limited to individual manufacturing processes and applications. The above requirements demand a fundamentally new approach to the future applications of micro manufacturing so as to obtain producibility, predictability and productivity covering the full process chains and value chains. A novel generic modular reconfigurable platform (GMRP) is proposed in such a context. The proposed GMRP is able to offer hybrid manufacturing capabilities, modularity, reconfigurablity and adaptivity as both an individual machine tool and a micro manufacturing system, and provides a cost effective solution to high value micro manufacturing in an agile, responsive and mass customisation manner. An integrated framework has been developed to assist the design of GMRPs due to their complexity. The framework incorporates theoretical GMRP model, design support system and extension interfaces. The GMRP model covers various relevant micro manufacturing processes and machine tool elements. The design support system includes a user-friendly interface, a design engine for design process and design evaluation, together with scalable design knowledge base and database. The functionalities of the framework can also be extended through the design support system interface, the GMRP interface and the application interface, i.e. linking to external hardware and/or software modules. The design support system provides a number of tools for the analysis and evaluation of the design solutions. The kinematic simulation of machine tools can be performed using the Virtual Reality toolbox in Matlab. A module has also been developed for the multiscale modelling, simulation and results analysis in Matlab. A number of different cutting parameters can be studied and the machining performance can be subsequently evaluated using this module. The mathematical models for a non-traditional micro manufacturing process, micro EDM, have been developed with the simulation performed using FEA. Various design theories and methodologies have been studied, and the axiomatic design theory has been selected because of its great power and simplicity. It has been applied in the conceptual design of GMRP and its design support system. The implementation of the design support system is carried out using Matlab, Java and XML technologies. The proposed GMRP and framework have been evaluated through case studies and experimental results.EThOS - Electronic Theses Online ServiceGBUnited Kingdo