4,035 research outputs found
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
Fade depth scaling with channel bandwidth
The dependence of small-scale fading on bandwidth is quantified experimentally in the 3.1–10.6 GHz band for indoor channels. The fade depth converges to 4 dB at 1 GHz bandwidth, with little reduction for further increase in bandwidth. A simple yet accurate empirical fade depth model is developed, enabling convenient evaluation of the link budget for a channel with given bandwidth
An indoor variance-based localization technique utilizing the UWB estimation of geometrical propagation parameters
A novel localization framework is presented based on ultra-wideband (UWB) channel sounding, employing a triangulation method using the geometrical properties of propagation paths, such as time delay of arrival, angle of departure, angle of arrival, and their estimated variances. In order to extract these parameters from the UWB sounding data, an extension to the high-resolution RiMAX algorithm was developed, facilitating the analysis of these frequency-dependent multipath parameters. This framework was then tested by performing indoor measurements with a vector network analyzer and virtual antenna arrays. The estimated means and variances of these geometrical parameters were utilized to generate multiple sample sets of input values for our localization framework. Next to that, we consider the existence of multiple possible target locations, which were subsequently clustered using a Kim-Parks algorithm, resulting in a more robust estimation of each target node. Measurements reveal that our newly proposed technique achieves an average accuracy of 0.26, 0.28, and 0.90 m in line-of-sight (LoS), obstructed-LoS, and non-LoS scenarios, respectively, and this with only one single beacon node. Moreover, utilizing the estimated variances of the multipath parameters proved to enhance the location estimation significantly compared to only utilizing their estimated mean values
Radio channel characterisation and system-level modelling for ultra wideband body-centric wireless communications
PhDThe next generation of wireless communication is evolving towards user-centric networks,
where constant and reliable connectivity and services are essential. Bodycentric
wireless network (BCWN) is the most exciting and emerging 4G technology
for short (1-5 m) and very short (below 1 m) range communication systems. It has
got numerous applications including healthcare, entertainment, surveillance, emergency,
sports and military. The major difference between the BCWN and conventional
wireless systems is the radio channel over which the communication takes place. The
human body is a hostile medium from the radio propagation perspective and it is
therefore important to understand and characterise the effect of the human body on
the antenna elements, the radio propagation channel parameters and hence the system
performance. In addition, fading is another concern that affects the reliability and
quality of the wireless link, which needs to be taken into account for a low cost and
reliable wireless communication system for body-centric networks.
The complex nature of the BCWN requires operating wireless devices to provide
low power requirements, less complexity, low cost and compactness in size. Apart
from these characteristics, scalable data rates and robust performance in most fading
conditions and jamming environment, even at low signal to noise ratio (SNR) is
needed. Ultra-wideband (UWB) technology is one of the most promising candidate for
BCWN as it tends to fulfill most of these requirements. The thesis focuses on the characterisation
of ultra wideband body-centric radio propagation channel using single
and multiple antenna techniques. Apart from channel characterisation, system level
modelling of potential UWB radio transceivers for body-centric wireless network is
also proposed. Channel models with respect to large scale and delay analysis are derived
from measured parameters. Results and analyses highlight the consequences
of static and dynamic environments in addition to the antenna positions on the performance
of body-centric wireless communication channels. Extensive measurement
i
campaigns are performed to analyse the significance of antenna diversity to combat
the channel fading in body-centric wireless networks. Various diversity combining
techniques are considered in this process. Measurement data are also used to predict
the performance of potential UWB systems in the body-centric wireless networks.
The study supports the significance of single and multiple antenna channel characterisation
and modelling in producing suitable wireless systems for ultra low power
body-centric wireless networks.University of Engineering and Technology Lahore Pakista
Impact of polarization diversity in massive MIMO for industry 4.0
The massive polarimetric radio channel is evaluated in an indoor industrial scenario at 3.5 GHz using a 10×10 uniform rectangular array (URA). The analysis is based on (1) propagation characteristics like the average received gain and the power to interference ratio from the Gram matrix and (2) system-oriented metrics such as sum-rate capacity with maximum-ratio transmitter (MRT). The results clearly show the impact of polarization diversity in an industrial scenario and how it can considerably improve different aspects of the system design. Results for sum-rate capacity are promising and show that the extra degree of freedom, provided by polarization diversity, can optimize the performance of a very simple precoder, the MRT
- …