5,824 research outputs found
Vehicular Fog Computing Enabled Real-time Collision Warning via Trajectory Calibration
Vehicular fog computing (VFC) has been envisioned as a promising paradigm for
enabling a variety of emerging intelligent transportation systems (ITS).
However, due to inevitable as well as non-negligible issues in wireless
communication, including transmission latency and packet loss, it is still
challenging in implementing safety-critical applications, such as real-time
collision warning in vehicular networks. In this paper, we present a vehicular
fog computing architecture, aiming at supporting effective and real-time
collision warning by offloading computation and communication overheads to
distributed fog nodes. With the system architecture, we further propose a
trajectory calibration based collision warning (TCCW) algorithm along with
tailored communication protocols. Specifically, an application-layer
vehicular-to-infrastructure (V2I) communication delay is fitted by the Stable
distribution with real-world field testing data. Then, a packet loss detection
mechanism is designed. Finally, TCCW calibrates real-time vehicle trajectories
based on received vehicle status including GPS coordinates, velocity,
acceleration, heading direction, as well as the estimation of communication
delay and the detection of packet loss. For performance evaluation, we build
the simulation model and implement conventional solutions including cloud-based
warning and fog-based warning without calibration for comparison. Real-vehicle
trajectories are extracted as the input, and the simulation results demonstrate
that the effectiveness of TCCW in terms of the highest precision and recall in
a wide range of scenarios
Human Motion Trajectory Prediction: A Survey
With growing numbers of intelligent autonomous systems in human environments,
the ability of such systems to perceive, understand and anticipate human
behavior becomes increasingly important. Specifically, predicting future
positions of dynamic agents and planning considering such predictions are key
tasks for self-driving vehicles, service robots and advanced surveillance
systems. This paper provides a survey of human motion trajectory prediction. We
review, analyze and structure a large selection of work from different
communities and propose a taxonomy that categorizes existing methods based on
the motion modeling approach and level of contextual information used. We
provide an overview of the existing datasets and performance metrics. We
discuss limitations of the state of the art and outline directions for further
research.Comment: Submitted to the International Journal of Robotics Research (IJRR),
37 page
Recommended from our members
Analysis-by-synthesis: Pedestrian tracking with crowd simulation models in a multi-camera video network
For tracking systems consisting of multiple cameras with overlapping field-of-views, homography-based approaches are widely adopted to significantly reduce occlusions among pedestrians by sharing information among multiple views. However, in these approaches, the usage of information under real-world coordinates is only at a preliminary level. Therefore, in this paper, a multi-camera tracking system with integrated crowd simulation is proposed in order to explore the possibility to make homography information more helpful. Two crowd simulators with different simulation strategies are used to investigate the influence of the simulation strategy on the final tracking performance. The performance is evaluated by multiple object tracking precision and accuracy (MOTP and MOTA) metrics, for all the camera views and the results obtained under real-world coordinates. The experimental results demonstrate that crowd simulators boost the tracking performance significantly, especially for crowded scenes with higher density. In addition, a more realistic simulation strategy helps to further improve the overall tracking result
Traffic Alert and Collision Avoidance System (TCAS): Cockpit Display of Traffic Information (CDTI) investigation. Phase 1: Feasibility study
The possibility of the Threat Alert and Collision Avoidance System (TCAS) traffic sensor and display being used for meaningful Cockpit Display of Traffic Information (CDTI) applications has resulted in the Federal Aviation Administration initiating a project to establish the technical and operational requirements to realize this potential. Phase 1 of the project is presented here. Phase 1 was organized to define specific CDTI applications for the terminal area, to determine what has already been learned about CDTI technology relevant to these applications, and to define the engineering required to supply the remaining TCAS-CDTI technology for capacity benefit realization. The CDTI applications examined have been limited to those appropriate to the final approach and departure phases of flight
A Learning-Based Framework for Two-Dimensional Vehicle Maneuver Prediction over V2V Networks
Situational awareness in vehicular networks could be substantially improved
utilizing reliable trajectory prediction methods. More precise situational
awareness, in turn, results in notably better performance of critical safety
applications, such as Forward Collision Warning (FCW), as well as comfort
applications like Cooperative Adaptive Cruise Control (CACC). Therefore,
vehicle trajectory prediction problem needs to be deeply investigated in order
to come up with an end to end framework with enough precision required by the
safety applications' controllers. This problem has been tackled in the
literature using different methods. However, machine learning, which is a
promising and emerging field with remarkable potential for time series
prediction, has not been explored enough for this purpose. In this paper, a
two-layer neural network-based system is developed which predicts the future
values of vehicle parameters, such as velocity, acceleration, and yaw rate, in
the first layer and then predicts the two-dimensional, i.e. longitudinal and
lateral, trajectory points based on the first layer's outputs. The performance
of the proposed framework has been evaluated in realistic cut-in scenarios from
Safety Pilot Model Deployment (SPMD) dataset and the results show a noticeable
improvement in the prediction accuracy in comparison with the kinematics model
which is the dominant employed model by the automotive industry. Both ideal and
nonideal communication circumstances have been investigated for our system
evaluation. For non-ideal case, an estimation step is included in the framework
before the parameter prediction block to handle the drawbacks of packet drops
or sensor failures and reconstruct the time series of vehicle parameters at a
desirable frequency
Parallel Multi-Hypothesis Algorithm for Criticality Estimation in Traffic and Collision Avoidance
Due to the current developments towards autonomous driving and vehicle active
safety, there is an increasing necessity for algorithms that are able to
perform complex criticality predictions in real-time. Being able to process
multi-object traffic scenarios aids the implementation of a variety of
automotive applications such as driver assistance systems for collision
prevention and mitigation as well as fall-back systems for autonomous vehicles.
We present a fully model-based algorithm with a parallelizable architecture.
The proposed algorithm can evaluate the criticality of complex, multi-modal
(vehicles and pedestrians) traffic scenarios by simulating millions of
trajectory combinations and detecting collisions between objects. The algorithm
is able to estimate upcoming criticality at very early stages, demonstrating
its potential for vehicle safety-systems and autonomous driving applications.
An implementation on an embedded system in a test vehicle proves in a
prototypical manner the compatibility of the algorithm with the hardware
possibilities of modern cars. For a complex traffic scenario with 11 dynamic
objects, more than 86 million pose combinations are evaluated in 21 ms on the
GPU of a Drive PX~2
- …