Photo-based automatic 3D reconstruction of train accident scenes

Railway accidents place significant demands on the resources of, and support from, railway emergency management departments. Once an accident occurs, an efficient incident rescue plan needs to be delivered as early as possible to minimise the loss of life and property. However, in the railway sector, most relevant departments currently face a challenge in drawing up a rescue scheme effectively and accurately with the insufficient information collected from the scene of a train accident. To assist with the rescue planning, we propose a framework which can rapidly and automatically construct a 3D virtual scene of a train accident by utilising photos of the accident spot. The framework uses a hybrid 3D reconstruction method to extract the position and pose information of the carriages involved in an accident. It adopts a geographic information system and a 3D visualisation engine to model and display the landscapes and buildings at the site of a train accident. In order to assess and validate our prototype, we quantitatively evaluate our main algorithm and demonstrate the usage of our technology with two case studies including a simulated scene with an in-lab setting and a real train derailment scene from on-site pictures. The results of both are accoun table with high accuracy and represent the ability of timely modelling and visualisation of a train accident scene

Relating Multimodal Imagery Data in 3D

This research develops and improves the fundamental mathematical approaches and techniques required to relate imagery and imagery derived multimodal products in 3D. Image registration, in a 2D sense, will always be limited by the 3D effects of viewing geometry on the target. Therefore, effects such as occlusion, parallax, shadowing, and terrain/building elevation can often be mitigated with even a modest amounts of 3D target modeling. Additionally, the imaged scene may appear radically different based on the sensed modality of interest; this is evident from the differences in visible, infrared, polarimetric, and radar imagery of the same site. This thesis develops a `model-centric\u27 approach to relating multimodal imagery in a 3D environment. By correctly modeling a site of interest, both geometrically and physically, it is possible to remove/mitigate some of the most difficult challenges associated with multimodal image registration. In order to accomplish this feat, the mathematical framework necessary to relate imagery to geometric models is thoroughly examined. Since geometric models may need to be generated to apply this `model-centric\u27 approach, this research develops methods to derive 3D models from imagery and LIDAR data. Of critical note, is the implementation of complimentary techniques for relating multimodal imagery that utilize the geometric model in concert with physics based modeling to simulate scene appearance under diverse imaging scenarios. Finally, the often neglected final phase of mapping localized image registration results back to the world coordinate system model for final data archival are addressed. In short, once a target site is properly modeled, both geometrically and physically, it is possible to orient the 3D model to the same viewing perspective as a captured image to enable proper registration. If done accurately, the synthetic model\u27s physical appearance can simulate the imaged modality of interest while simultaneously removing the 3-D ambiguity between the model and the captured image. Once registered, the captured image can then be archived as a texture map on the geometric site model. In this way, the 3D information that was lost when the image was acquired can be regained and properly related with other datasets for data fusion and analysis

Map building fusing acoustic and visual information using autonomous underwater vehicles

Author Posting. © The Author(s), 2012. This is the author's version of the work. It is posted here by permission of John Wiley & Sons for personal use, not for redistribution. The definitive version was published in Journal of Field Robotics 30 (2013): 763–783, doi:10.1002/rob.21473.We present a system for automatically building 3-D maps of underwater terrain fusing visual data from a single camera with range data from multibeam sonar. The six-degree of freedom location of the camera relative to the navigation frame is derived as part of the mapping process, as are the attitude offsets of the multibeam head and the on-board velocity sensor. The system uses pose graph optimization and the square root information smoothing and mapping framework to simultaneously solve for the robot’s trajectory, the map, and the camera location in the robot’s frame. Matched visual features are treated within the pose graph as images of 3-D landmarks, while multibeam bathymetry submap matches are used to impose relative pose constraints linking robot poses from distinct tracklines of the dive trajectory. The navigation and mapping system presented works under a variety of deployment scenarios, on robots with diverse sensor suites. Results of using the system to map the structure and appearance of a section of coral reef are presented using data acquired by the Seabed autonomous underwater vehicle.The work described herein was funded by the National Science Foundation Censsis ERC under grant number EEC-9986821, and by the National Oceanic and Atmospheric Administration under grant number NA090AR4320129

A Factor Graph Approach to Multi-Camera Extrinsic Calibration on Legged Robots

Legged robots are becoming popular not only in research, but also in industry, where they can demonstrate their superiority over wheeled machines in a variety of applications. Either when acting as mobile manipulators or just as all-terrain ground vehicles, these machines need to precisely track the desired base and end-effector trajectories, perform Simultaneous Localization and Mapping (SLAM), and move in challenging environments, all while keeping balance. A crucial aspect for these tasks is that all onboard sensors must be properly calibrated and synchronized to provide consistent signals for all the software modules they feed. In this paper, we focus on the problem of calibrating the relative pose between a set of cameras and the base link of a quadruped robot. This pose is fundamental to successfully perform sensor fusion, state estimation, mapping, and any other task requiring visual feedback. To solve this problem, we propose an approach based on factor graphs that jointly optimizes the mutual position of the cameras and the robot base using kinematics and fiducial markers. We also quantitatively compare its performance with other state-of-the-art methods on the hydraulic quadruped robot HyQ. The proposed approach is simple, modular, and independent from external devices other than the fiducial marker.Comment: To appear on "The Third IEEE International Conference on Robotic Computing (IEEE IRC 2019)

Advances in Simultaneous Localization and Mapping in Confined Underwater Environments Using Sonar and Optical Imaging.

This thesis reports on the incorporation of surface information into a probabilistic simultaneous localization and mapping (SLAM) framework used on an autonomous underwater vehicle (AUV) designed for underwater inspection. AUVs operating in cluttered underwater environments, such as ship hulls or dams, are commonly equipped with Doppler-based sensors, which---in addition to navigation---provide a sparse representation of the environment in the form of a three-dimensional (3D) point cloud. The goal of this thesis is to develop perceptual algorithms that take full advantage of these sparse observations for correcting navigational drift and building a model of the environment. In particular, we focus on three objectives. First, we introduce a novel representation of this 3D point cloud as collections of planar features arranged in a factor graph. This factor graph representation probabalistically infers the spatial arrangement of each planar segment and can effectively model smooth surfaces (such as a ship hull). Second, we show how this technique can produce 3D models that serve as input to our pipeline that produces the first-ever 3D photomosaics using a two-dimensional (2D) imaging sonar. Finally, we propose a model-assisted bundle adjustment (BA) framework that allows for robust registration between surfaces observed from a Doppler sensor and visual features detected from optical images. Throughout this thesis, we show methods that produce 3D photomosaics using a combination of triangular meshes (derived from our SLAM framework or given a-priori), optical images, and sonar images. Overall, the contributions of this thesis greatly increase the accuracy, reliability, and utility of in-water ship hull inspection with AUVs despite the challenges they face in underwater environments. We provide results using the Hovering Autonomous Underwater Vehicle (HAUV) for autonomous ship hull inspection, which serves as the primary testbed for the algorithms presented in this thesis. The sensor payload of the HAUV consists primarily of: a Doppler velocity log (DVL) for underwater navigation and ranging, monocular and stereo cameras, and---for some applications---an imaging sonar.PhDElectrical Engineering: SystemsUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/120750/1/paulozog_1.pd

Error Characterization of Flight Trajectories Reconstructed Using Structure from Motion

This research effort assessed the accuracy of Structure from Motion (SFM) algorithms in replicating aircraft fight trajectories. Structure from Motion techniques can be used to estimate aircraft trajectory by determining the position and pose of an aircraft mounted camera from a sequential series of images taken during flight. An algorithm is proposed and implemented that successfully reconstructed aircraft trajectory using only a known starting position and a sequential series of images. The error in and reliability of the algorithm was found to be a function of image resolution as well as the amount of overlap and angular separation between sequential images. The trajectory estimated by the algorithm drifted from the true trajectory as a function of distance traveled. The drift was dominated by uncertainty in the scale of the reconstruction as well as angular errors in estimated camera orientations. A proposed system architecture that incorporated scale and attitude updates was tested on actual flight test data. The architecture successfully reconstructed a variety of trajectories but drift rates were highly variable

Towards High-resolution Imaging from Underwater Vehicles

Large area mapping at high resolution underwater continues to be constrained by sensor-level environmental constraints and the mismatch between available navigation and sensor accuracy. In this paper, advances are presented that exploit aspects of the sensing modality, and consistency and redundancy within local sensor measurements to build high-resolution optical and acoustic maps that are a consistent representation of the environment. This work is presented in the context of real-world data acquired using autonomous underwater vehicles (AUVs) and remotely operated vehicles (ROVs) working in diverse applications including shallow water coral reef surveys with the Seabed AUV, a forensic survey of the RMS Titanic in the North Atlantic at a depth of 4100 m using the Hercules ROV, and a survey of the TAG hydrothermal vent area in the mid-Atlantic at a depth of 3600 m using the Jason II ROV. Specifically, the focus is on the related problems of structure from motion from underwater optical imagery assuming pose instrumented calibrated cameras. General wide baseline solutions are presented for these problems based on the extension of techniques from the simultaneous localization and mapping (SLAM), photogrammetric and the computer vision communities. It is also examined how such techniques can be extended for the very different sensing modality and scale associated with multi-beam bathymetric mapping. For both the optical and acoustic mapping cases it is also shown how the consistency in mapping can be used not only for better global mapping, but also to refine navigation estimates.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/86051/1/hsingh-21.pd