Antennas and Propagation of Implanted RFIDs for Pervasive Healthcare Applications

© 2010 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.This post-acceptance version of the paper is essentially complete, but may differ from the official copy of record, which can be found at the following web location (subscription required to access full paper): http://dx.doi.org/10.1109/JPROC.2010.205101

Real-time and long lasting Internet of Things through semantic wake-up radios

The world is going towards the Internet of Things (IoT) where trillions of objects that are common in our lives will be enhanced and revolutionized by adding them computational and networking capabilities. Examples are cars, street lamps, industrial machinery, electrical appliances. The corner- stone of Internet of Things research is Wireless Sensor Networks (WSNs). These networks are made of hundreds of low-cost, low-complexity devices endowed with sensors to monitor the surrounding environment or objects. Typically these devices (also called sensors, nodes or motes) are battery-powered, therefore they can operate for a limited amount of time (i.e., days) before running out of energy. This is the main challenge that applications of Wireless Sensor Networks have to face. Since one of the major power consumers in a node is the radio transceiver, a lot of research effort has been put into finding solutions that keep the radio in a low-power state as much as possible, while not harming the communication capability. While this approach brings the network lifetime, i.e. the time before battery-operated nodes die having depleted their energy, to years or more, it introduces significant latency, as the energy reduction comes at the cost of not being able to reach nodes in deep sleep for long period of times. The most promising solution to this problem is the wake-up radio, an additional ultra-low power transceiver used for the sole purpose of triggering the activation of the high power, high bandwidth radio. Wake-up radio enabled IoT systems maintain always on their wake up radio, which has a negligible energy consumption, in this way optimizing both energy and latency performance metrics. Most of the research so far focused on the design of wake-up receivers, while a limited amount of communication protocols that take advantage of this radio has been proposed. Moreover, almost all of these protocols have been evaluated only through simulations. In this thesis we set to start filling this gap. We first evaluate the range performance of an ultra-low power wake-up receiver integrated into a state- of-the-art Wireless Sensor Network mote, the MagoNode++. Based on the results of this evaluation we deploy an outdoor testbed made of MagoNode++ motes. The testbed allows to validate in a real-world scenario our implementation of CTP-WUR, an extension of the widely used Collection Tree Protocol (CTP) for wake-up radio-enabled Wireless Sensor Networks. The comparison between CTP-WUR and CTP demonstrates that wake-up radios can effectively reduce the power consumption and obtain, at the same time, end-to-end latencies in the order of milliseconds, enabling new time critical applications. Based on the results and on the insights gained dur- ing the testbed evaluation a new version of CTP-WUR is presented that improves its performance across all the metrics taken into consideration: end-to-end packet latency, energy consumption and Packet Delivery Ratio

A survey on wireless body area networks for eHealthcare systems in residential environments

The progress in wearable and implanted health monitoring technologies has strong potential to alter the future of healthcare services by enabling ubiquitous monitoring of patients. A typical health monitoring system consists of a network of wearable or implanted sensors that constantly monitor physiological parameters. Collected data are relayed using existing wireless communication protocols to the base station for additional processing. This article provides researchers with information to compare the existing low-power communication technologies that can potentially support the rapid development and deployment of WBAN systems, and mainly focuses on remote monitoring of elderly or chronically ill patients in residential environments

Performance of a live multi-gateway LoRaWAN and interference measurement across indoor and outdoor localities

Little work has been reported on the magnitude and impact of interference with the performance of Internet of Things (IoT) applications operated by Long-Range Wide-Area Network (LoRaWAN) in the unlicensed 868 MHz Industrial, Scientific, and Medical (ISM) band. The propagation performance and signal activity measurement of such technologies can give many insights to effectively build long-range wireless communications in a Non-Line of Sight (NLOS) environment. In this paper, the performance of a live multi-gateway in indoor office site in Glasgow city was analysed in 26 days of traffic measurement. The indoor network performances were compared to similar performance measurements from outdoor LoRaWAN test traffic generated across Glasgow Central Business District (CBD) and elsewhere on the same LoRaWAN. The results revealed 99.95% packet transfer success on the first attempt in the indoor site compared to 95.7% at the external site. The analysis shows that interference is attributed to nearly 50 X greater LoRaWAN outdoor packet loss than indoor. The interference measurement results showed a 13.2–97.3% and 4.8–54% probability of interfering signals, respectively, in the mandatory Long-Range (LoRa) uplink and downlink channels, capable of limiting LoRa coverage in some areas

A Self-organizing Hybrid Sensor System With Distributed Data Fusion For Intruder Tracking And Surveillance

A wireless sensor network is a network of distributed nodes each equipped with its own sensors, computational resources and transceivers. These sensors are designed to be able to sense specific phenomenon over a large geographic area and communicate this information to the user. Most sensor networks are designed to be stand-alone systems that can operate without user intervention for long periods of time. While the use of wireless sensor networks have been demonstrated in various military and commercial applications, their full potential has not been realized primarily due to the lack of efficient methods to self organize and cover the entire area of interest. Techniques currently available focus solely on homogeneous wireless sensor networks either in terms of static networks or mobile networks and suffers from device specific inadequacies such as lack of coverage, power and fault tolerance. Failing nodes result in coverage loss and breakage in communication connectivity and hence there is a pressing need for a fault tolerant system to allow replacing of the failed nodes. In this dissertation, a unique hybrid sensor network is demonstrated that includes a host of mobile sensor platforms. It is shown that the coverage area of the static sensor network can be improved by self-organizing the mobile sensor platforms to allow interaction with the static sensor nodes and thereby increase the coverage area. The performance of the hybrid sensor network is analyzed for a set of N mobile sensors to determine and optimize parameters such as the position of the mobile nodes for maximum coverage of the sensing area without loss of signal between the mobile sensors, static nodes and the central control station. A novel approach to tracking dynamic targets is also presented. Unlike other tracking methods that are based on computationally complex methods, the strategy adopted in this work is based on a computationally simple but effective technique of received signal strength indicator measurements. The algorithms developed in this dissertation are based on a number of reasonable assumptions that are easily verified in a densely distributed sensor network and require simple computations that efficiently tracks the target in the sensor field. False alarm rate, probability of detection and latency are computed and compared with other published techniques. The performance analysis of the tracking system is done on an experimental testbed and also through simulation and the improvement in accuracy over other methods is demonstrated

Indoor Localization Solutions for a Marine Industry Augmented Reality Tool

In this report are described means for indoor localization in special, challenging circum-stances in marine industry. The work has been carried out in MARIN project, where a tool based on mobile augmented reality technologies for marine industry is developed. The tool can be used for various inspection and documentation tasks and it is aimed for improving the efficiency in design and construction work by offering the possibility to visualize the newest 3D-CAD model in real environment. Indoor localization is needed to support the system in initialization of the accurate camera pose calculation and auto-matically finding the right location in the 3D-CAD model. The suitability of each indoor localization method to the specific environment and circumstances is evaluated.Siirretty Doriast

On the Improvement of Cellular Coverage Maps by Filtering MDT Measurements

In cellular systems, network re-planning aims to update network configuration to cope with permanent changes in the environment. In this task, terminal measurements are often used to calibrate performance models integrated in radio network planning tools. In Release 10 of the 3GPP standard, the Minimization of Drive Test (MDT) feature allows the collection of user position correlated to performance statistics or radio events. In practice, positioning errors severely limit the potential of MDT measurements. In this work, a preliminary analysis of a large MDT dataset taken from a commercial Long-Term Evolution (LTE) network shows for the first time several sources of positioning errors not previously reported in the literature. Then, a heuristic filtering algorithm is proposed to discard samples with inaccurate location data. Method assessment is done by checking the impact of filtering on the coverage map built with a real MDT dataset. Results show that the proposed method significantly improves the accuracy of coverage maps by filtering unreliable measurements.European Union’s Horizon 2020 Research and Innovation Programme under the Project H2020 LOCUS under (Grant 871249

Advanced Trends in Wireless Communications

Physical limitations on wireless communication channels impose huge challenges to reliable communication. Bandwidth limitations, propagation loss, noise and interference make the wireless channel a narrow pipe that does not readily accommodate rapid flow of data. Thus, researches aim to design systems that are suitable to operate in such channels, in order to have high performance quality of service. Also, the mobility of the communication systems requires further investigations to reduce the complexity and the power consumption of the receiver. This book aims to provide highlights of the current research in the field of wireless communications. The subjects discussed are very valuable to communication researchers rather than researchers in the wireless related areas. The book chapters cover a wide range of wireless communication topics

Saiyan: Design and Implementation of a Low-power Demodulator for LoRa Backscatter Systems

The radio range of backscatter systems continues growing as new wireless communication primitives are continuously invented. Nevertheless, both the bit error rate and the packet loss rate of backscatter signals increase rapidly with the radio range, thereby necessitating the cooperation between the access point and the backscatter tags through a feedback loop. Unfortunately, the low-power nature of backscatter tags limits their ability to demodulate feedback signals from a remote access point and scales down to such circumstances. This paper presents Saiyan, an ultra-low-power demodulator for long-range LoRa backscatter systems. With Saiyan, a backscatter tag can demodulate feedback signals from a remote access point with moderate power consumption and then perform an immediate packet retransmission in the presence of packet loss. Moreover, Saiyan enables rate adaption and channel hopping-two PHY-layer operations that are important to channel efficiency yet unavailable on long-range backscatter systems. We prototype Saiyan on a two-layer PCB board and evaluate its performance in different environments. Results show that Saiyan achieves 5 gain on the demodulation range, compared with state-of-the-art systems. Our ASIC simulation shows that the power consumption of Saiyan is around 93.2 uW. Code and hardware schematics can be found at: https://github.com/ZangJac/Saiyan