Variation Resilient Adaptive Controller for Subthreshold Circuits

Subthreshold logic is showing good promise as a viable ultra-low-power circuit design technique for power-limited applications. For this design technique to gain widespread adoption, one of the most pressing concerns is how to improve the robustness of subthreshold logic to process and temperature variations. We propose a variation resilient adaptive controller for subthreshold circuits with the following novel features: new sensor based on time-to-digital converter for capturing the variations accurately as digital signatures, and an all-digital DC-DC converter incorporating the sensor capable of generating an operating operating Vdd from 0V to 1.2V with a resolution of 18.75mV, suitable for subthreshold circuit operation. The benefits of the proposed controller is reflected with energy improvement of up to 55% compared to when no controller is employed. The detailed implementation and validation of the proposed controller is discussed

Cross-Layer Optimization for Power-Efficient and Robust Digital Circuits and Systems

With the increasing digital services demand, performance and power-efficiency become vital requirements for digital circuits and systems. However, the enabling CMOS technology scaling has been facing significant challenges of device uncertainties, such as process, voltage, and temperature variations. To ensure system reliability, worst-case corner assumptions are usually made in each design level. However, the over-pessimistic worst-case margin leads to unnecessary power waste and performance loss as high as 2.2x. Since optimizations are traditionally confined to each specific level, those safe margins can hardly be properly exploited. To tackle the challenge, it is therefore advised in this Ph.D. thesis to perform a cross-layer optimization for digital signal processing circuits and systems, to achieve a global balance of power consumption and output quality. To conclude, the traditional over-pessimistic worst-case approach leads to huge power waste. In contrast, the adaptive voltage scaling approach saves power (25% for the CORDIC application) by providing a just-needed supply voltage. The power saving is maximized (46% for CORDIC) when a more aggressive voltage over-scaling scheme is applied. These sparsely occurred circuit errors produced by aggressive voltage over-scaling are mitigated by higher level error resilient designs. For functions like FFT and CORDIC, smart error mitigation schemes were proposed to enhance reliability (soft-errors and timing-errors, respectively). Applications like Massive MIMO systems are robust against lower level errors, thanks to the intrinsically redundant antennas. This property makes it applicable to embrace digital hardware that trades quality for power savings.Comment: 190 page

All-digital self-adaptive PVTA variation aware clock generation system for DFS

An all-digital self-adaptive clock generation system capable of adapt the clock frequency to compensate the effects of PVTA variations on the IC propagation delay and satisfy an externally set propagation length condition is presented. The design uses time-to-digital converters (TDCs) to measure the propagation length and a variable length ring oscillator (VLRO) to synthesize the clock signal. The VLRO naturally adapts its frequency to the PVTA variations suffered by its logic gates while the TDCs are used to track these variations across the chip and modify the VLRO length in order to adapt the clock frequency to them. The system measurements, for a 45nm FPGA, show that it adapts the VLRO length, and therefore the clock frequency, to satisfy the propagation length condition. Measurements also prove the system capabilities to act as a dynamic frequency scaling clock source since the propagation length condition value act as a frequency selection input and a strong linear relation between the input value and the resultant clock period is present.Peer ReviewedPostprint (author’s final draft

Fuse: A technique to anticipate failures due to degradation in ALUs

This paper proposes the fuse, a technique to anticipate failures due to degradation in any ALU (arithmetic logic unit), and particularly in an adder. The fuse consists of a replica of the weakest transistor in the adder and the circuitry required to measure its degradation. By mimicking the behavior of the replicated transistor the fuse anticipates the failure short before the first failure in the adder appears, and hence, data corruption and program crashes can be avoided. Our results show that the fuse anticipates the failure in more than 99.9% of the cases after 96.6% of the lifetime, even for pessimistic random within-die variations.Peer ReviewedPostprint (published version

Power efficient resilient microarchitectures for PVT variability mitigation

Nowadays, the high power density and the process, voltage, and temperature variations became the most critical issues that limit the performance of the digital integrated circuits because of the continuous scaling of the fabrication technology. Dynamic voltage and frequency scaling technique is used to reduce the power consumption while different time relaxation techniques and error recovery microarchitectures are used to tolerate the process, voltage, and temperature variations. These techniques reduce the throughput by scaling down the frequency or flushing and restarting the errant pipeline. This thesis presents a novel resilient microarchitecture which is called ERSUT-based resilient microarchitecture to tolerate the induced delays generated by the voltage scaling or the process, voltage, and temperature variations. The resilient microarchitecture detects and recovers the induced errors without flushing the pipeline and without scaling down the operating frequency. An ERSUT-based resilient 16 × 16 bit MAC unit, implemented using Global Foundries 65 nm technology and ARM standard cells library, is introduced as a case study with 18.26% area overhead and up to 1.5x speedup. At the typical conditions, the maximum frequency of the conventional MAC unit is about 375 MHz while the resilient MAC unit operates correctly at a frequency up to 565 MHz. In case of variations, the resilient MAC unit tolerates induced delays up to 50% of the clock period while keeping its throughput equal to the conventional MAC unit’s maximum throughput. At 375 MHz, the resilient MAC unit is able to scale down the supply voltage from 1.2 V to 1.0 V saving about 29% of the power consumed by the conventional MAC unit. A double-edge-triggered microarchitecture is also introduced to reduce the power consumption extremely by reducing the frequency of the clock tree to the half while preserving the same maximum throughput. This microarchitecture is applied to different ISCAS’89 benchmark circuits in addition to the 16x16 bit MAC unit and the average power reduction of all these circuits is 63.58% while the average area overhead is 31.02%. All these circuits are designed using Global Foundries 65nm technology and ARM standard cells library. Towards the full automation of the ERSUT-based resilient microarchitecture, an ERSUT-based algorithm is introduced in C++ to accelerate the design process of the ERSUT-based microarchitecture. The developed algorithm reduces the design-time efforts dramatically and allows the ERSUT-based microarchitecture to be adopted by larger industrial designs. Depending on the ERSUT-based algorithm, a validation study about applying the ERSUT-based microarchitecture on the MAC unit and different ISCAS’89 benchmark circuits with different complexity weights is introduced. This study shows that 72% of these circuits tolerates more than 14% of their clock periods and 54.5% of these circuits tolerates more than 20% while 27% of these circuits tolerates more than 30%. Consequently, the validation study proves that the ERSUT-based resilient microarchitecture is a valid applicable solution for different circuits with different complexity weights

Analysis and Design of Resilient VLSI Circuits

The reliable operation of Integrated Circuits (ICs) has become increasingly difficult to achieve in the deep sub-micron (DSM) era. With continuously decreasing device feature sizes, combined with lower supply voltages and higher operating frequencies, the noise immunity of VLSI circuits is decreasing alarmingly. Thus, VLSI circuits are becoming more vulnerable to noise effects such as crosstalk, power supply variations and radiation-induced soft errors. Among these noise sources, soft errors (or error caused by radiation particle strikes) have become an increasingly troublesome issue for memory arrays as well as combinational logic circuits. Also, in the DSM era, process variations are increasing at an alarming rate, making it more difficult to design reliable VLSI circuits. Hence, it is important to efficiently design robust VLSI circuits that are resilient to radiation particle strikes and process variations. The work presented in this dissertation presents several analysis and design techniques with the goal of realizing VLSI circuits which are tolerant to radiation particle strikes and process variations. This dissertation consists of two parts. The first part proposes four analysis and two design approaches to address radiation particle strikes. The analysis techniques for the radiation particle strikes include: an approach to analytically determine the pulse width and the pulse shape of a radiation induced voltage glitch in combinational circuits, a technique to model the dynamic stability of SRAMs, and a 3D device-level analysis of the radiation tolerance of voltage scaled circuits. Experimental results demonstrate that the proposed techniques for analyzing radiation particle strikes in combinational circuits and SRAMs are fast and accurate compared to SPICE. Therefore, these analysis approaches can be easily integrated in a VLSI design flow to analyze the radiation tolerance of such circuits, and harden them early in the design flow. From 3D device-level analysis of the radiation tolerance of voltage scaled circuits, several non-intuitive observations are made and correspondingly, a set of guidelines are proposed, which are important to consider to realize radiation hardened circuits. Two circuit level hardening approaches are also presented to harden combinational circuits against a radiation particle strike. These hardening approaches significantly improve the tolerance of combinational circuits against low and very high energy radiation particle strikes respectively, with modest area and delay overheads. The second part of this dissertation addresses process variations. A technique is developed to perform sensitizable statistical timing analysis of a circuit, and thereby improve the accuracy of timing analysis under process variations. Experimental results demonstrate that this technique is able to significantly reduce the pessimism due to two sources of inaccuracy which plague current statistical static timing analysis (SSTA) tools. Two design approaches are also proposed to improve the process variation tolerance of combinational circuits and voltage level shifters (which are used in circuits with multiple interacting power supply domains), respectively. The variation tolerant design approach for combinational circuits significantly improves the resilience of these circuits to random process variations, with a reduction in the worst case delay and low area penalty. The proposed voltage level shifter is faster, requires lower dynamic power and area, has lower leakage currents, and is more tolerant to process variations, compared to the best known previous approach. In summary, this dissertation presents several analysis and design techniques which significantly augment the existing work in the area of resilient VLSI circuit design