Joint Access-Backhaul Perspective on Mobility Management in 5G Networks

The ongoing efforts in the research development and standardization of 5G, by both industry and academia, have resulted in the identification of enablers (Software Defined Networks, Network Function Virtualization, Distributed Mobility Management, etc.) and critical areas (Mobility management, Interference management, Joint access-backhaul mechanisms, etc.) that will help achieve the 5G objectives. During these efforts, it has also been identified that the 5G networks due to their high degree of heterogeneity, high QoS demand and the inevitable density (both in terms of access points and users), will need to have efficient joint backhaul and access mechanisms as well as enhanced mobility management mechanisms in order to be effective, efficient and ubiquitous. Therefore, in this paper we first provide a discussion on the evolution of the backhaul scenario, and the necessity for joint access and backhaul optimization. Subsequently, and since mobility management mechanisms can entail the availability, reliability and heterogeneity of the future backhaul/fronthaul networks as parameters in determining the most optimal solution for a given context, a study with regards to the effect of future backhaul/fronthaul scenarios on the design and implementation of mobility management solutions in 5G networks has been performed.Comment: IEEE Conference on Standards for Communications & Networking, September 2017, Helsinki, Finlan

Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks

Soaring capacity and coverage demands dictate that future cellular networks need to soon migrate towards ultra-dense networks. However, network densification comes with a host of challenges that include compromised energy efficiency, complex interference management, cumbersome mobility management, burdensome signaling overheads and higher backhaul costs. Interestingly, most of the problems, that beleaguer network densification, stem from legacy networks' one common feature i.e., tight coupling between the control and data planes regardless of their degree of heterogeneity and cell density. Consequently, in wake of 5G, control and data planes separation architecture (SARC) has recently been conceived as a promising paradigm that has potential to address most of aforementioned challenges. In this article, we review various proposals that have been presented in literature so far to enable SARC. More specifically, we analyze how and to what degree various SARC proposals address the four main challenges in network densification namely: energy efficiency, system level capacity maximization, interference management and mobility management. We then focus on two salient features of future cellular networks that have not yet been adapted in legacy networks at wide scale and thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and device-to-device (D2D) communications. After providing necessary background on CoMP and D2D, we analyze how SARC can particularly act as a major enabler for CoMP and D2D in context of 5G. This article thus serves as both a tutorial as well as an up to date survey on SARC, CoMP and D2D. Most importantly, the article provides an extensive outlook of challenges and opportunities that lie at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201

A Comprehensive Review of D2D Communication in 5G and B5G Networks

The evolution of Device-to-device (D2D) communication represents a significant breakthrough within the realm of mobile technology, particularly in the context of 5G and beyond 5G (B5G) networks. This innovation streamlines the process of data transfer between devices that are in close physical proximity to each other. D2D communication capitalizes on the capabilities of nearby devices to communicate directly with one another, thereby optimizing the efficient utilization of available network resources, reducing latency, enhancing data transmission speed, and increasing the overall network capacity. In essence, it empowers more effective and rapid data sharing among neighboring devices, which is especially advantageous within the advanced landscape of mobile networks such as 5G and B5G. The development of D2D communication is largely driven by mobile operators who gather and leverage short-range communications data to propel this technology forward. This data is vital for maintaining proximity-based services and enhancing network performance. The primary objective of this research is to provide a comprehensive overview of recent progress in different aspects of D2D communication, including the discovery process, mode selection methods, interference management, power allocation, and how D2D is employed in 5G technologies. Furthermore, the study also underscores the unresolved issues and identifies the challenges associated with D2D communication, shedding light on areas that need further exploration and developmen

INTERFERENCE MANAGEMENT IN LTE SYSTEM AND BEYOUND

The key challenges to high throughput in cellular wireless communication system are interference, mobility and bandwidth limitation. Mobility has never been a problem until recently, bandwidth has been constantly improved upon through the evolutions in cellular wireless communication system but interference has been a constant limitation to any improvement that may have resulted from such evolution. The fundamental challenge to a system designer or a researcher is how to achieve high data rate in motion (high speed) in a cellular system that is intrinsically interference-limited. Multi-antenna is the solution to data on the move and the capacity of multi-antenna system has been demonstrated to increase proportionally with increase in the number of antennas at both transmitter and receiver for point-to-point communications and multi-user environment. However, the capacity gain in both uplink and downlink is limited in a multi-user environment like cellular system by interference, the number of antennas at the base station, complexity and space constraint particularly for a mobile terminal. This challenge in the downlink provided the motivation to investigate successive interference cancellation (SIC) as an interference management tool LTE system and beyond. The Simulation revealed that ordered successive interference (OSIC) out performs non-ordered successive interference cancellation (NSIC) and the additional complexity is justified based on the associated gain in BER performance of OSIC. The major drawback of OSIC is that it is not efficient in network environment employing power control or power allocation. Additional interference management techniques will be required to fully manage the interference.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Efficient energy management in ultra-dense wireless networks

The increase in demand for more network capacity has led to the evolution of wireless networks from being largely Heterogeneous (Het-Nets) to the now existing Ultra-dense (UDNs). In UDNs, small cells are densely deployed with the goal of shortening the physical distance between the base stations (BSs) and the UEs, so as to support more user equipment (UEs) at peak times while ensuring high data rates. Compared to Het-Nets, Ultra-dense networks (UDNs) have many advantages. These include, more network capacity, higher flexibility to routine configurations, and more suitability to achieve load-balancing, hence, fewer blind spots as well as lower call blocking probability. It should be noted that, in practice, due to the high density of deployed small cells in Ultra-Dense Networks, a number of issues, or rather concerns, come with this evolution from Het-Nets. Among these issues include problems with efficient radio resource management, user cell association, inter- and intra-cell interference management and, last but not least, efficient energy consumption. Some of these issues which impact the overall network efficiency are largely due to the use of obsolete algorithms, especially those whose resource allocation is based solely on received signal power (RSSP). In this paper, the focus is solely on the efficient energy management dilemma and how to optimally reduce the overall network energy consumption. Through an extensive literature review, a detailed report into the growing concern of efficient energy management in UDNs is provided in Chapter 2. The literature review report highlights the classification as well as the evolution of some of the Mobile Wireless Technologies and Mobile Wireless Networks in general. The literature review report provides reasons as to why the energy consumption issue has become a very serious concern in UltraDense networks as well as the various techniques and measures taken to mitigate this. It is shown that, due to the increasing Mobile Wireless Systems’ carbon footprint which carries serious negative environmental impact, and the general need to lower operating costs by the network operators, the management of energy consumption increases in priority. By using the architecture of a Fourth Generation Long Term Evolution (4G-LTE) UltraDense Network, the report further shows that more than 65% of the overall energy consumption is by the access network and base stations in particular. This phenomenon explains why most attention in energy efficiency management in UDNs is largely centred on reducing the energy consumption of the deployed base stations more than any other network components like the data servers or backhauling features used. Furthermore, the report also provides detailed information on the methods/techniques, their classification, implementation, as well as a critical analysis of the said implementations in literature. This study proposes a sub-optimal algorithm and Distributed Cell Resource Allocation with a Base Station On/Off scheme that aims at reducing the overall base station power consumption in UDNs, while ensuring that the overall Quality of Service (QoS) for each User Equipment (UE) as specified in its service class is met. The modeling of the system model used and hence formulation of the Network Energy Efficiency (NEE) optimization problem is done viii using stochastic geometry. The network model comprises both evolved Node B (eNB) type macro and small cells operating on different frequency bands as well as taking into account factors that impact NEE such as UE mobility, UE spatial distribution and small cells spatial distribution. The channel model takes into account signal interference from all base stations, path loss, fading, log normal shadowing, modulation and coding schemes used on each UE’s communication channels when computing throughout. The power consumption model used takes into account both static (site cooling, circuit power) and active (transmission or load based) base station power consumption. The formulation of the NEE optimization problem takes into consideration the user’s Quality-of-service (QoS), inter-cell interference, as well as each user’s spectral efficiency and coverage/success probability. The formulated NEE optimization problem is of type Nondeterministic Polynomial time (NP)-hard, due to the user-cell association. The proposed solution to the formulated optimization problem makes use of constraint relaxation to transform the NP-hard problem into a more solvable, convex and linear optimization one. This, combined with Lagrangian dual decomposition, is used to create a distributed solution. After cellassociation and resource allocation phases, the proposed solution in order to further reduce power consumption performs Cell On/Off. Then, by using the computer simulation tools/environments, the “Distributed Resource Allocation with Cell On/Off” scheme’s performance, in comparison to four other resource allocation schemes, is analysed and evaluated given a number of different network scenarios. Finally, the statistical and mathematical results generated through the simulations indicate that the proposed scheme is the closest in NEE performance to the Exhaustive Search algorithm, and hence superior to the other sub-optimal algorithms it is compared to

Will 5G See its Blind Side? Evolving 5G for Universal Internet Access

Internet has shown itself to be a catalyst for economic growth and social equity but its potency is thwarted by the fact that the Internet is off limits for the vast majority of human beings. Mobile phones---the fastest growing technology in the world that now reaches around 80\% of humanity---can enable universal Internet access if it can resolve coverage problems that have historically plagued previous cellular architectures (2G, 3G, and 4G). These conventional architectures have not been able to sustain universal service provisioning since these architectures depend on having enough users per cell for their economic viability and thus are not well suited to rural areas (which are by definition sparsely populated). The new generation of mobile cellular technology (5G), currently in a formative phase and expected to be finalized around 2020, is aimed at orders of magnitude performance enhancement. 5G offers a clean slate to network designers and can be molded into an architecture also amenable to universal Internet provisioning. Keeping in mind the great social benefits of democratizing Internet and connectivity, we believe that the time is ripe for emphasizing universal Internet provisioning as an important goal on the 5G research agenda. In this paper, we investigate the opportunities and challenges in utilizing 5G for global access to the Internet for all (GAIA). We have also identified the major technical issues involved in a 5G-based GAIA solution and have set up a future research agenda by defining open research problems

Joint access-backhaul perspective on mobility management in 5G networks

© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The ongoing efforts in the research, development and standardization of 5G, by both industry and academia, have resulted in the identification of enablers (Software Defined Networks, Network Function Virtualization, Distributed Mobility Management, etc.) and critical areas (Mobility management, Interference management, Joint access-backhaul mechanisms, etc.) that will help achieve the 5G objectives. During these efforts, it has also been identified that the 5G networks, due to their high degree of heterogeneity, high QoS demand and the inevitable density (both in terms of access points and users), will need to have efficient joint backhaul and access mechanisms as well as enhanced mobility management mechanisms in order to be effective, efficient and ubiquitous. Therefore, in this paper, we first provide a discussion on the evolution of the backhaul scenario, and the necessity for joint access and backhaul optimization. Subsequently, and since mobility management mechanisms can entail the availability, reliability and heterogeneity of the future backhaul/fronthaul networks as parameters in determining the most optimal solution for a given context, a study with regards to the effect of future backhaul/fronthaul scenarios on the design and implementation of mobility management solutions in 5G networks has been performed.Postprint (author's final draft