Internet of Things and Sensors Networks in 5G Wireless Communications

This book is a printed edition of the Special Issue Internet of Things and Sensors Networks in 5G Wireless Communications that was published in Sensors

Optimal resource scheduling for energy-efficient next generation wireless networks

Cellular networks can provide highly available and reliable communication links to the Internet of Things (IoT) applications, letting the connected Things paradigm gain much more momentum than ever. Also, the rich information collected from the Things with sensing capabilities can guide the network operator to an unforeseen direction, allowing the underlying cellular networks to be further optimized. In this regard, the cellular networks and IoT are conceived as the key components of the beyond-4G and future 5G networks. Therefore, in this dissertation, we study each of the two components in depth, focusing on how to optimize the networking resources for the quality service and better energy-efficiency. To begin with, we study the heterogeneous cellular network architecture which is a major enhancement to the current 4G network by means of the base station (BS) densification and traffic offloading. In particular, the densely deployed short-range, low-power smallcell base stations (SBSs) can significantly improve the frequency reuse, throughput performance and the energy-efficiency. We then study the heterogeneous C-RAN (cloud radio access network), which is one of the core enablers of the next generation 5G cellular networks. In particular, with the high availability provided by the long-range macro BS (MBS), the heterogeneous C-RAN (H-CRAN) can effectively enhance the overall resource utilization compared to the conventional C-RANs. In each study, we propose an optimal resource scheduling and service provisioning scheme to provide a quality service to users in a resource-efficient manner. In addition, we carry out two studies for the Internet of Things (IoT) networks operating with the IEEE 802.11ah standard. Specifically, we introduce energy-efficient device management algorithms for the battery-operated, resource-constrained IoT sensor devices to prolong their lifetime by optimally scheduling their activation. The enhanced power saving mechanism and the optimal sensing algorithm that we propose in each study can effectively improve both the energy-efficiency of the IoT devices and the lifetime of the entire network

Internet of Things and Sensors Networks in 5G Wireless Communications

This book is a printed edition of the Special Issue Internet of Things and Sensors Networks in 5G Wireless Communications that was published in Sensors

Internet of Things and Sensors Networks in 5G Wireless Communications

The Internet of Things (IoT) has attracted much attention from society, industry and academia as a promising technology that can enhance day to day activities, and the creation of new business models, products and services, and serve as a broad source of research topics and ideas. A future digital society is envisioned, composed of numerous wireless connected sensors and devices. Driven by huge demand, the massive IoT (mIoT) or massive machine type communication (mMTC) has been identified as one of the three main communication scenarios for 5G. In addition to connectivity, computing and storage and data management are also long-standing issues for low-cost devices and sensors. The book is a collection of outstanding technical research and industrial papers covering new research results, with a wide range of features within the 5G-and-beyond framework. It provides a range of discussions of the major research challenges and achievements within this topic

A Survey on Energy Optimization Techniques in UAV-Based Cellular Networks: From Conventional to Machine Learning Approaches

Wireless communication networks have been witnessing an unprecedented demand due to the increasing number of connected devices and emerging bandwidth-hungry applications. Albeit many competent technologies for capacity enhancement purposes, such as millimeter wave communications and network densification, there is still room and need for further capacity enhancement in wireless communication networks, especially for the cases of unusual people gatherings, such as sport competitions, musical concerts, etc. Unmanned aerial vehicles (UAVs) have been identified as one of the promising options to enhance the capacity due to their easy implementation, pop up fashion operation, and cost-effective nature. The main idea is to deploy base stations on UAVs and operate them as flying base stations, thereby bringing additional capacity to where it is needed. However, because the UAVs mostly have limited energy storage, their energy consumption must be optimized to increase flight time. In this survey, we investigate different energy optimization techniques with a top-level classification in terms of the optimization algorithm employed; conventional and machine learning (ML). Such classification helps understand the state of the art and the current trend in terms of methodology. In this regard, various optimization techniques are identified from the related literature, and they are presented under the above mentioned classes of employed optimization methods. In addition, for the purpose of completeness, we include a brief tutorial on the optimization methods and power supply and charging mechanisms of UAVs. Moreover, novel concepts, such as reflective intelligent surfaces and landing spot optimization, are also covered to capture the latest trend in the literature.Comment: 41 pages, 5 Figures, 6 Tables. Submitted to Open Journal of Communications Society (OJ-COMS

Journal of Telecommunications and Information Technology

kwartalni

AN EFFICIENT INTERFERENCE AVOIDANCE SCHEME FOR DEVICE-TODEVICE ENABLED FIFTH GENERATION NARROWBAND INTERNET OF THINGS NETWOKS’

Narrowband Internet of Things (NB-IoT) is a low-power wide-area (LPWA) technology built on long-term evolution (LTE) functionalities and standardized by the 3rd-Generation Partnership Project (3GPP). Due to its support for massive machine-type communication (mMTC) and different IoT use cases with rigorous standards in terms of connection, energy efficiency, reachability, reliability, and latency, NB-IoT has attracted the research community. However, as the capacity needs for various IoT use cases expand, the LTE evolved packet core (EPC) system's numerous functionalities may become overburdened and suboptimal. Several research efforts are currently in progress to address these challenges. As a result, an overview of these efforts with a specific focus on the optimized architecture of the LTE EPC functionalities, the 5G architectural design for NB-IoT integration, the enabling technologies necessary for 5G NB-IoT, 5G new radio (NR) coexistence with NB-IoT, and feasible architectural deployment schemes of NB-IoT with cellular networks is discussed. This thesis also presents cloud-assisted relay with backscatter communication as part of a detailed study of the technical performance attributes and channel communication characteristics from the physical (PHY) and medium access control (MAC) layers of the NB-IoT, with a focus on 5G. The numerous drawbacks that come with simulating these systems are explored. The enabling market for NB-IoT, the benefits for a few use cases, and the potential critical challenges associated with their deployment are all highlighted. Fortunately, the cyclic prefix orthogonal frequency division multiplexing (CPOFDM) based waveform by 3GPP NR for improved mobile broadband (eMBB) services does not prohibit the use of other waveforms in other services, such as the NB-IoT service for mMTC. As a result, the coexistence of 5G NR and NB-IoT must be manageably orthogonal (or quasi-orthogonal) to minimize mutual interference that limits the form of freedom in the waveform's overall design. As a result, 5G coexistence with NB-IoT will introduce a new interference challenge, distinct from that of the legacy network, even though the NR's coexistence with NB-IoT is believed to improve network capacity and expand the coverage of the user data rate, as well as improves robust communication through frequency reuse. Interference challenges may make channel estimation difficult for NB-IoT devices, limiting the user performance and spectral efficiency. Various existing interference mitigation solutions either add to the network's overhead, computational complexity and delay or are hampered by low data rate and coverage. These algorithms are unsuitable for an NB-IoT network owing to the low-complexity nature. As a result, a D2D communication based interference-control technique becomes an effective strategy for addressing this problem. This thesis used D2D communication to decrease the network bottleneck in dense 5G NBIoT networks prone to interference. For D2D-enabled 5G NB-IoT systems, the thesis presents an interference-avoidance resource allocation that considers the less favourable cell edge NUEs. To simplify the algorithm's computing complexity and reduce interference power, the system divides the optimization problem into three sub-problems. First, in an orthogonal deployment technique using channel state information (CSI), the channel gain factor is leveraged by selecting a probable reuse channel with higher QoS control. Second, a bisection search approach is used to find the best power control that maximizes the network sum rate, and third, the Hungarian algorithm is used to build a maximum bipartite matching strategy to choose the optimal pairing pattern between the sets of NUEs and the D2D pairs. The proposed approach improves the D2D sum rate and overall network SINR of the 5G NB-IoT system, according to the numerical data. The maximum power constraint of the D2D pair, D2D's location, Pico-base station (PBS) cell radius, number of potential reuse channels, and cluster distance impact the D2D pair's performance. The simulation results achieve 28.35%, 31.33%, and 39% SINR performance higher than the ARSAD, DCORA, and RRA algorithms when the number of NUEs is twice the number of D2D pairs, and 2.52%, 14.80%, and 39.89% SINR performance higher than the ARSAD, RRA, and DCORA when the number of NUEs and D2D pairs are equal. As a result, a D2D sum rate increase of 9.23%, 11.26%, and 13.92% higher than the ARSAD, DCORA, and RRA when the NUE’s number is twice the number of D2D pairs, and a D2D’s sum rate increase of 1.18%, 4.64% and 15.93% higher than the ARSAD, RRA and DCORA respectively, with an equal number of NUEs and D2D pairs is achieved. The results demonstrate the efficacy of the proposed scheme. The thesis also addressed the problem where the cell-edge NUE's QoS is critical to challenges such as long-distance transmission, delays, low bandwidth utilization, and high system overhead that affect 5G NB-IoT network performance. In this case, most cell-edge NUEs boost their transmit power to maximize network throughput. Integrating cooperating D2D relaying technique into 5G NB-IoT heterogeneous network (HetNet) uplink spectrum sharing increases the system's spectral efficiency and interference power, further degrading the network. Using a max-max SINR (Max-SINR) approach, this thesis proposed an interference-aware D2D relaying strategy for 5G NB-IoT QoS improvement for a cell-edge NUE to achieve optimum system performance. The Lagrangian-dual technique is used to optimize the transmit power of the cell-edge NUE to the relay based on the average interference power constraint, while the relay to the NB-IoT base station (NBS) employs a fixed transmit power. To choose an optimal D2D relay node, the channel-to-interference plus noise ratio (CINR) of all available D2D relays is used to maximize the minimum cell-edge NUE's data rate while ensuring the cellular NUEs' QoS requirements are satisfied. Best harmonic mean, best-worst, half-duplex relay selection, and a D2D communication scheme were among the other relaying selection strategies studied. The simulation results reveal that the Max-SINR selection scheme outperforms all other selection schemes due to the high channel gain between the two communication devices except for the D2D communication scheme. The proposed algorithm achieves 21.27% SINR performance, which is nearly identical to the half-duplex scheme, but outperforms the best-worst and harmonic selection techniques by 81.27% and 40.29%, respectively. As a result, as the number of D2D relays increases, the capacity increases by 14.10% and 47.19%, respectively, over harmonic and half-duplex techniques. Finally, the thesis presents future research works on interference control in addition with the open research directions on PHY and MAC properties and a SWOT (Strengths, Weaknesses, Opportunities, and Threats) analysis presented in Chapter 2 to encourage further study on 5G NB-IoT

Power control with Machine Learning Techniques in Massive MIMO cellular and cell-free systems

This PhD thesis presents a comprehensive investigation into power control (PC) optimization in cellular (CL) and cell-free (CF) massive multiple-input multiple-output (mMIMO) systems using machine learning (ML) techniques. The primary focus is on enhancing the sum spectral efficiency (SE) of these systems by leveraging various ML methods. To begin with, it is combined and extended two existing datasets, resulting in a unique dataset tailored for this research. The weighted minimum mean square error (WMMSE) method, a popular heuristic approach, is utilized as the baseline method for addressing the sum SE maximization problem. It is compared the performance of the WMMSE method with the deep Q-network (DQN) method through training on the complete dataset in both CL and CF-mMIMO systems. Furthermore, the PC problem in CL/CF-mMIMO systems is effectively tackled through the application of ML-based algorithms. These algorithms present highly efficient solutions with significantly reduced computational complexity [3]. Several ML methods are proposed for CL/CF-mMIMO systems, tailored explicitly to address the PC problem in CL/CF-mMIMO systems. Among them are the innovative proposed Fuzzy/DQN method, proposed DNN/GA method, proposed support vector machine (SVM) method, proposed SVM/RBF method, proposed decision tree (DT) method, proposed K-nearest neighbour (KNN) method, proposed linear regression (LR) method, and the novel proposed fusion scheme. The fusion schemes expertly combine multiple ML methods, such as system model 1 (DNN, DNN/GA, DQN, fuzzy/DQN, and SVM algorithms) and system model 2 (DNN, SVM-RBF, DQL, LR, KNN, and DT algorithms), which are thoroughly evaluated to maximize the sum spectral efficiency (SE), offering a viable alternative to computationally intensive heuristic algorithms. Subsequently, the DNN method is singled out for its exceptional performance and is further subjected to in-depth analysis. Each of the ML methods is trained on a merged dataset to extract a novel feature vector, and their respective performances are meticulously compared against the WMMSE method in the context of CL/CF-mMIMO systems. This research promises to pave the way for more robust and efficient PC solutions, ensuring enhanced SE and ultimately advancing the field of CL/CF-mMIMO systems. The results reveal that the DNN method outperforms the other ML methods in terms of sum SE, while exhibiting significantly lower computational complexity compared to the WMMSE algorithm. Therefore, the DNN method is chosen for examining its transferability across two datasets (dataset A and B) based on their shared common features. Three scenarios are devised for the transfer learning method, involving the training of the DNN method on dataset B (S1), the utilization of model A and dataset B (S2), and the retraining of model A on dataset B (S3). These scenarios are evaluated to assess the effectiveness of the transfer learning approach. Furthermore, three different setups for the DNN architecture (DNN1, DNN2, and DNN3) are employed and compared to the WMMSE method based on performance metrics such as mean squared error (MSE), root mean squared error (RMSE), and mean absolute error (MAE). Moreover, the research evaluates the impact of the number of base stations (BSs), access points (APs), and users on PC in CL/CF-mMIMO systems using ML methodology. Datasets capturing diverse scenarios and configurations of mMIMO systems were carefully assembled. Extensive simulations were conducted to analyze how the increasing number of BSs/APs affects the dimensionality of the input vector in the DNN algorithm. The observed improvements in system performance are quantified by the enhanced discriminative power of the model, illustrated through the cumulative distribution function (CDF). This metric encapsulates the model's ability to effectively capture and distinguish patterns across diverse scenarios and configurations within mMIMO systems. The parameter of the CDF being indicated is the probability. Specifically, the improved area under the CDF refers to an enhanced probability of a random variable falling below a certain threshold. This enhancement denotes improved model performance, showcasing a greater precision in predicting outcomes. Interestingly, the number of users was found to have a limited effect on system performance. The comparison between the DNN-based PC method and the conventional WMMSE method revealed the superior performance and efficiency of the DNN algorithm. Lastly, a comprehensive assessment of the DNN method against the WMMSE method was conducted for addressing the PC optimization problem in both CL and CF system architectures. In addition to, this thesis focuses on enhancing spectral efficiency (SE) in wireless communication systems, particularly within cell-free (CF) mmWave massive MIMO environments. It explores the challenges of optimizing SE through traditional methods, including the weighted minimum mean squared error (WMMSE), fractional programming (FP), water-filling, and max-min fairness approaches. The prevalence of access points (APs) over user equipment (UE) highlights the importance of zero-forcing precoding (ZFP) in CF-mMIMO. However, ZFP faces issues related to channel aging and resource utilization. To address these challenges, a novel scheme called delay-tolerant zero-forcing precoding (DT-ZFP) is introduced, leveraging deep learning-aided channel prediction to mitigate channel aging effects. Additionally, a cutting-edge power control (PC) method, HARP-PC, is proposed, combining heterogeneous graph neural network (HGNN), adaptive neuro-fuzzy inference system (ANFIS), and reinforcement learning (RL) to optimize SE in dynamic CF mmWave-mMIMO systems. This research advances the field by addressing these challenges and introducing innovative approaches to enhance PC and SE in contemporary wireless communication networks. Overall, this research contributes to the advancement of PC optimization in CL/CF-mMIMO systems through the application of ML techniques, demonstrating the potential of the DNN method, and providing insights into system performance under various scenarios and network configurations

Sustainable Mobility and Transport

This Special Issue is dedicated to sustainable mobility and transport, with a special focus on technological advancements. Global transport systems are significant sources of air, land, and water emissions. A key motivator for this Special Issue was the diversity and complexity of mitigating transport emissions and industry adaptions towards increasingly stricter regulation. Originally, the Special Issue called for papers devoted to all forms of mobility and transports. The papers published in this Special Issue cover a wide range of topics, aiming to increase understanding of the impacts and effects of mobility and transport in working towards sustainability, where most studies place technological innovations at the heart of the matter. The goal of the Special Issue is to present research that focuses, on the one hand, on the challenges and obstacles on a system-level decision making of clean mobility, and on the other, on indirect effects caused by these changes