A variable stiffness soft gripper using granular jamming and biologically inspired pneumatic muscles

As the domains in which robots operate change the objects a robot may be required to grasp and manipulate are likely to vary significantly and often. Furthermore there is increasing likelihood that in the future robots will work collaboratively alongside people. There has therefore been interest in the development of biologically inspired robot designs which take inspiration from nature. This paper presents the design and testing of a variable stiffness, three fingered soft gripper which uses pneumatic muscles to actuate the fingers and granular jamming to vary their stiffness. This gripper is able to adjust its stiffness depending upon how fragile/deformable the object being grasped is. It is also lightweight and low inertia making it better suited to operation near people. Each finger is formed from a cylindrical rubber bladder filled with a granular material. It is shown how decreasing the pressure inside the finger increases the jamming effect and raises finger stiffness. The paper shows experimentally how the finger stiffness can be increased from 21 to 71 N/m. The paper also describes the kinematics of the fingers and demonstrates how they can be position-controlled at a range of different stiffness values

The design, kinematics and torque analysis of the self-bending soft contraction actuator

This article presents the development of a self-bending contraction actuator (SBCA) through analysis of its structure, kinematics, and torque formulas, and then explores its applications. The proposed actuator has been fabricated by two methods to prove the efficiency of the human body inspiration, which represents the covering of human bones by soft tissues to protect the bone and give the soft texture. The SBCA provides bending behaviour along with a high force to-weight ratio. As with the simple pneumatic muscle actuator (PMA), the SBCA is soft and easy to implement. Both the kinematics and the torque formula presented for the SBCA are scalable and can be used with different actuator sizes. The bending actuator has been tested under an air pressure up to 500 kPa, and the behaviour of its bending angle, parameters, dimensions, and the bending torques have been illustrated. On the other hand, the experiments showed the efficient performances of the actuator and validate the proposed kinematics. Therefore, the actuator can be used in many different applications, such as soft grippers and continuum arms

Experimental Evaluation of A Cylinder Actuator Control Using McKibben Muscle

There has been an increased interest in applying pneumatic muscle actuator (PMA) in robotic systems because of its low weight and high compliant characteristics. On the other hand, pneumatic muscle actuator (PMA) is gaining attention in robotic applications because of its low weight and high compliant characteristics. It is known that the McKibben muscle is different from the fluidic cylinder actuator in that the cylinder was unstable in its position and in its velocity in an open-loop system unlike the McKibben that is stable in its position. The modeling and control of McKibben muscle as the actuator for the cylinder are crucial because it is known to have non-linear response, hysteresis and small stroke. In this project, a single acting cylinder model which would have uncontrolled extension to push direction by compressed air, is actuated and controlled using a PMA. The system is designed with two 1.3mm-diameter McKibben muscles attached to the cylinder. Open loop control was used and the result shows that the PMA is able to control the cylinder with good performance

Wrist rehabilitation exoskeleton robot based on pneumatic soft actuators

The aim of this paper is to describe the design of a soft, wearable splint for wrist joint rehabilitation, based on pneumatic soft actuators. The extensor bending and the contraction types of pneumatic soft actuators have been adopted in this study. These actuators are shown to be appropriate by examining their characteristics. The main contributions of this study are developing a safe, lightweight, soft and small actuator for direct human interaction, designing a novel single portable wearable soft robot capable of performing all wrist rehabilitation movements, and using low-cost materials to create the device. Three modes of rehabilitation exercises in the exoskeleton are involved: Flexion/Extension, Radial/Ulnar deviation, and circular movements

3D position mapping of continuum arm

Modelling a continuum arm is one of the major challenges in soft robotic researches. An accurate position model allows wider use of continuum robot arms in industrial and medical applications. Furthermore, accurate control can be achieved. This paper illustrates the 3D position of a constructed soft arm from 4 pneumatic muscle actuators (PMAs) in parallel, and models the movement of its free end in space. The performance of the contraction and extension PMAs and the behaviour of the contraction and extension arms are analysed, and a comparison between the two arms is explained. Finally, the mathematical models are presented and validated

Experimental analysis of fluidic muscles

Fluidic muscles have been the subject of research since the 1930s to the present day. McKibben's muscle is one of the most common ones. This type is the basis for fluidic muscles already being used commercially. The power-to-weight ratio is one of their main advantages. The disadvantage is difficult handling. The article describes experimental verification of static characteristics of fluidic muscles. During muscle contraction, a tensile force is developed which changes as the length of the muscle changes. This dependence is experimentally verified. A measuring equipment for testing fluidic muscles of various lengths and diameters is designed and assembled. The device consists of a pneumatic circuit, where the output drive is a loaded fluidic muscle. The load of muscle is generated by a hydraulic cylinder. The results will be further applicable to fluidic muscle simulations.Web of Science20225763575

Modeling and parametric optimization of 3D tendon-sheath actuator system for upper limb soft exosuit

This paper presents an analysis of parametric characterization of a motor driven tendon-sheath actuator system for use in upper limb augmentation for applications such as rehabilitation, therapy, and industrial automation. The double tendon sheath system, which uses two sets of cables (agonist and antagonist side) guided through a sheath, is considered to produce smooth and natural-looking movements of the arm. The exoskeleton is equipped with a single motor capable of controlling both the flexion and extension motions. One of the key challenges in the implementation of a double tendon sheath system is the possibility of slack in the tendon, which can impact the overall performance of the system. To address this issue, a robust mathematical model is developed and a comprehensive parametric study is carried out to determine the most effective strategies for overcoming the problem of slack and improving the transmission. The study suggests that incorporating a series spring into the system's tendon leads to a universally applicable design, eliminating the need for individual customization. The results also show that the slack in the tendon can be effectively controlled by changing the pretension, spring constant, and size and geometry of spool mounted on the axle of motor

EFFECTS OF BRAID ANGLE ON PNEUMATIC ARTIFICIAL MUSCLE ACTUATOR PERFORMANCE

ABSTRACT Pneumatic artificial muscles (PAMs) provide numerous advantages for use as actuators in a wide variety of mechanical systems. Our study focused on determining the effects of braid angle on the performance of PAMs. This paper discusses how we constructed a set of PAMs with varying braid angle, predicted their performance using analytical models, gathered empirical data characterizing the PAMs, and compared the analytical predictions with the experimental results. We constructed six PAMs of different braid angles between 38 o and 73 o . To predict PAM performance, we used an analysis based on the force equilibrium equations for a pressurized actuator. We first quantified the performance limits of each actuator in a series of static characterization tests. Then we subjected each PAM to cyclical displacement testing. Finally, a series of cyclical tests were performed with a pre-strain applied to the PAMs, to better approximate their typical use. Our results showed variation of braid angle causes significant differences in performance among the six PAMs tested; PAMs with larger braid angle generated higher blocked force and exhibited greater contraction. The empirical data matched the model predictions based on our estimates for the braid angle of a given PAM

Active soft end effectors for efficient grasping and safe handling

The end effector is a major part of a robot system and it defines the task the robot can perform. However, typically, a gripper is suited to grasping only a single or relatively small number of different objects. Dexterous grippers offer greater grasping ability but they are often very expensive, difficult to control and are insufficiently robust for industrial operation. This paper explores the principles of soft robotics and the design of low-cost grippers able to grasp a broad range of objects without the need for complex control schemes. Two different soft end effectors have been designed and built and their physical structure, characteristics and operational performances have been analysed. The soft grippers deform and conform to the object being grasped, meaning they are simple to control and minimal grasp planning is required. The soft nature of the grippers also makes them better suited to handling fragile and delicate objects than a traditional rigid gripper

The design and mathematical modelling of novel extensor bending pneumatic artificial muscles (EBPAMs) for soft exoskeletons

This article presents the development of a power augmentation and rehabilitation exoskeleton based on a novel actuator. The proposed soft actuators are extensor bending pneumatic artificial muscles. This type of soft actuator is derived from extending McKibben artificial muscles by reinforcing one side to prevent extension. This research has experimentally assessed the performance of this new actuator and an output force mathematical model for it has been developed. This new mathematical model based on the geometrical parameters of the extensor bending pneumatic artificial muscle determines the output force as a function of the input pressure. This model is examined experimentally for different actuator sizes. After promising initial experimental results, further model enhancements were made to improve the model of the proposed actuator. To demonstrate the new bending actuators a power augmentation and rehabilitation soft glove has been developed. This soft hand exoskeleton is able to fit any adult hand size without the need for any mechanical system changes or calibration. EMG signals from the human hand have been monitored to prove the performance of this new design of soft exoskeleton. This power augmentation and rehabilitation wearable robot has been shown to reduce the amount of muscles effort needed to perform a number of simple grasps