1,549 research outputs found
System Design of Internet-of-Things for Residential Smart Grid
Internet-of-Things (IoTs) envisions to integrate, coordinate, communicate,
and collaborate real-world objects in order to perform daily tasks in a more
intelligent and efficient manner. To comprehend this vision, this paper studies
the design of a large scale IoT system for smart grid application, which
constitutes a large number of home users and has the requirement of fast
response time. In particular, we focus on the messaging protocol of a universal
IoT home gateway, where our cloud enabled system consists of a backend server,
unified home gateway (UHG) at the end users, and user interface for mobile
devices. We discuss the features of such IoT system to support a large scale
deployment with a UHG and real-time residential smart grid applications. Based
on the requirements, we design an IoT system using the XMPP protocol, and
implemented in a testbed for energy management applications. To show the
effectiveness of the designed testbed, we present some results using the
proposed IoT architecture.Comment: 10 pages, 6 figures, journal pape
Performance Comparison of Contention- and Schedule-based MAC Protocols in Urban Parking Sensor Networks
Network traffic model is a critical problem for urban applications, mainly
because of its diversity and node density. As wireless sensor network is highly
concerned with the development of smart cities, careful consideration to
traffic model helps choose appropriate protocols and adapt network parameters
to reach best performances on energy-latency tradeoffs. In this paper, we
compare the performance of two off-the-shelf medium access control protocols on
two different kinds of traffic models, and then evaluate their application-end
information delay and energy consumption while varying traffic parameters and
network density. From the simulation results, we highlight some limits induced
by network density and occurrence frequency of event-driven applications. When
it comes to realtime urban services, a protocol selection shall be taken into
account - even dynamically - with a special attention to energy-delay tradeoff.
To this end, we provide several insights on parking sensor networks.Comment: ACM International Workshop on Wireless and Mobile Technologies for
Smart Cities (WiMobCity) (2014
Async-HFL: Efficient and Robust Asynchronous Federated Learning in Hierarchical IoT Networks
Federated Learning (FL) has gained increasing interest in recent years as a
distributed on-device learning paradigm. However, multiple challenges remain to
be addressed for deploying FL in real-world Internet-of-Things (IoT) networks
with hierarchies. Although existing works have proposed various approaches to
account data heterogeneity, system heterogeneity, unexpected stragglers and
scalibility, none of them provides a systematic solution to address all of the
challenges in a hierarchical and unreliable IoT network. In this paper, we
propose an asynchronous and hierarchical framework (Async-HFL) for performing
FL in a common three-tier IoT network architecture. In response to the largely
varied delays, Async-HFL employs asynchronous aggregations at both the gateway
and the cloud levels thus avoids long waiting time. To fully unleash the
potential of Async-HFL in converging speed under system heterogeneities and
stragglers, we design device selection at the gateway level and device-gateway
association at the cloud level. Device selection chooses edge devices to
trigger local training in real-time while device-gateway association determines
the network topology periodically after several cloud epochs, both satisfying
bandwidth limitation. We evaluate Async-HFL's convergence speedup using
large-scale simulations based on ns-3 and a network topology from NYCMesh. Our
results show that Async-HFL converges 1.08-1.31x faster in wall-clock time and
saves up to 21.6% total communication cost compared to state-of-the-art
asynchronous FL algorithms (with client selection). We further validate
Async-HFL on a physical deployment and observe robust convergence under
unexpected stragglers.Comment: Accepted by IoTDI'2
Internet of Things-aided Smart Grid: Technologies, Architectures, Applications, Prototypes, and Future Research Directions
Traditional power grids are being transformed into Smart Grids (SGs) to
address the issues in existing power system due to uni-directional information
flow, energy wastage, growing energy demand, reliability and security. SGs
offer bi-directional energy flow between service providers and consumers,
involving power generation, transmission, distribution and utilization systems.
SGs employ various devices for the monitoring, analysis and control of the
grid, deployed at power plants, distribution centers and in consumers' premises
in a very large number. Hence, an SG requires connectivity, automation and the
tracking of such devices. This is achieved with the help of Internet of Things
(IoT). IoT helps SG systems to support various network functions throughout the
generation, transmission, distribution and consumption of energy by
incorporating IoT devices (such as sensors, actuators and smart meters), as
well as by providing the connectivity, automation and tracking for such
devices. In this paper, we provide a comprehensive survey on IoT-aided SG
systems, which includes the existing architectures, applications and prototypes
of IoT-aided SG systems. This survey also highlights the open issues,
challenges and future research directions for IoT-aided SG systems
DYNAMIC ROUTING WITH CROSS-LAYER ADAPTATIONS FOR MULTI-HOP WIRELESS NETWORKS
In recent years there has been a proliferation of research on a number of wireless multi-hop networks that include mobile ad-hoc networks, wireless mesh networks, and wireless sensor networks (WSNs). Routing protocols in such networks are of- ten required to meet design objectives that include a combination of factors such as throughput, delay, energy consumption, network lifetime etc. In addition, many mod- ern wireless networks are equipped with multi-channel radios, where channel selection plays an important role in achieving the same design objectives. Consequently, ad- dressing the routing problem together with cross-layer adaptations such as channel selection is an important issue in such networks. In this work, we study the joint routing and channel selection problem that spans two domains of wireless networks. The first is a cost-effective and scalable wireless-optical access networks which is a combination of high-capacity optical access and unethered wireless access. The joint routing and channel selection problem in this case is addressed under an anycasting paradigm. In addition, we address two other problems in the context of wireless- optical access networks. The first is on optimal gateway placement and network planning for serving a given set of users. And the second is the development of an analytical model to evaluate the performance of the IEEE 802.11 DCF in radio-over- fiber wireless LANs. The second domain involves resource constrained WSNs where we focus on route and channel selection for network lifetime maximization. Here, the problem is further exacerbated by distributed power control, that introduces addi- tional design considerations. Both problems involve cross-layer adaptations that must be solved together with routing. Finally, we present an analytical model for lifetime calculation in multi-channel, asynchronous WSNs under optimal power control
Optimal coverage multi-path scheduling scheme with multiple mobile sinks for WSNs
Wireless Sensor Networks (WSNs) are usually formed with many tiny sensors which are randomly deployed within sensing field for target monitoring. These sensors can transmit their monitored data to the sink in a multi-hop communication manner. However, the âhot spotsâ problem will be caused since nodes near sink will consume more energy during forwarding. Recently, mobile sink based technology provides an alternative solution for the long-distance communication and sensor nodes only need to use single hop communication to the mobile sink during data transmission. Even though it is difficult to consider many network metrics such as sensor position, residual energy and coverage rate etc., it is still very important to schedule a reasonable moving trajectory for the mobile sink. In this paper, a novel trajectory scheduling method based on coverage rate for multiple mobile sinks (TSCR-M) is presented especially for large-scale WSNs. An improved particle swarm optimization (PSO) combined with mutation operator is introduced to search the parking positions with optimal coverage rate. Then the genetic algorithm (GA) is adopted to schedule the moving trajectory for multiple mobile sinks. Extensive simulations are performed to validate the performance of our proposed method
DESIGN OF RELIABLE AND SUSTAINABLE WIRELESS SENSOR NETWORKS: CHALLENGES, PROTOCOLS AND CASE STUDIES
Integrated with the function of sensing, processing, and wireless communication, wireless sensors are attracting strong interest for a variety of monitoring and control applications. Wireless sensor networks (WSNs) have been deployed for industrial and remote monitoring purposes. As energy shortage is a worldwide problem, more attention has been placed on incorporating energy harvesting devices in WSNs. The main objective of this research is to systematically study the design principles and technical approaches to address three key challenges in designing reliable and sustainable WSNs; namely, communication reliability, operation with extremely low and dynamic power sources, and multi-tier network architecture. Mathematical throughput models, sustainable WSN communication strategies, and multi-tier network architecture are studied in this research to address these challenges, leading to protocols for reliable communication, energy-efficient operation, and network planning for specific application requirements. To account for realistic operating conditions, the study has implemented three distinct WSN testbeds: a WSN attached to the high-speed rotating spindle of a turning lathe, a WSN powered by a microbial fuel cell based energy harvesting system, and a WSN with a multi-tier network architecture. With each testbed, models and protocols are extracted, verified and analyzed. Extensive research has studied low power WSNs and energy harvesting capabilities. Despite these efforts, some important questions have not been well understood. This dissertation addresses the following three dimensions of the challenge. First, for reliable communication protocol design, mathematical throughput or energy efficiency estimation models are essential, yet have not been investigated accounting for specific application environment characteristics and requirements. Second, for WSNs with energy harvesting power sources, most current networking protocols do not work efficiently with the systems considered in this dissertation, such as those powered by extremely low and dynamic energy sources. Third, for multi-tier wireless network system design, routing protocols that are adaptive to real-world network conditions have not been studied. This dissertation focuses on these questions and explores experimentally derived mathematical models for designing protocols to meet specific application requirements. The main contributions of this research are 1) for industrial wireless sensor systems with fast-changing but repetitive mobile conditions, understand the performance and optimal choice of reliable wireless sensor data transmission methods, 2) for ultra-low energy harvesting wireless sensor devices, design an energy neutral communication protocol, and 3) for distributed rural wireless sensor systems, understand the efficiency of realistic routing in a multi-tier wireless network. Altogether, knowledge derived from study of the systems, models, and protocols in this work fuels the establishment of a useful framework for designing future WSNs
- âŠ