625 research outputs found
Energy Efficiency and Coverage Trade-Off in 5G for Eco-Friendly and Sustainable Cellular Networks
Recently, cellular networks’ energy efficiency has garnered research interest from academia
and industry because of its considerable economic and ecological effects in the near future. This study
proposes an approach to cooperation between the Long-Term Evolution (LTE) and next-generation
wireless networks. The fifth-generation (5G) wireless network aims to negotiate a trade-off between
wireless network performance (sustaining the demand for high speed packet rates during busy traffic
periods) and energy efficiency (EE) by alternating 5G base stations’ (BSs) switching off/on based
on the traffic instantaneous load condition and, at the same time, guaranteeing network coverage
for mobile subscribers by the remaining active LTE BSs. The particle swarm optimization (PSO)
algorithm was used to determine the optimum criteria of the active LTE BSs (transmission power,
total antenna gain, spectrum/channel bandwidth, and signal-to-interference-noise ratio) that achieves
maximum coverage for the entire area during the switch-off session of 5G BSs. Simulation results
indicate that the energy savings can reach 3.52 kW per day, with a maximum data rate of up to
22.4 Gbps at peak traffic hours and 80.64 Mbps during a 5G BS switched-off session along with
guaranteed full coverage over the entire region by the remaining active LTE BSs
Will 5G See its Blind Side? Evolving 5G for Universal Internet Access
Internet has shown itself to be a catalyst for economic growth and social
equity but its potency is thwarted by the fact that the Internet is off limits
for the vast majority of human beings. Mobile phones---the fastest growing
technology in the world that now reaches around 80\% of humanity---can enable
universal Internet access if it can resolve coverage problems that have
historically plagued previous cellular architectures (2G, 3G, and 4G). These
conventional architectures have not been able to sustain universal service
provisioning since these architectures depend on having enough users per cell
for their economic viability and thus are not well suited to rural areas (which
are by definition sparsely populated). The new generation of mobile cellular
technology (5G), currently in a formative phase and expected to be finalized
around 2020, is aimed at orders of magnitude performance enhancement. 5G offers
a clean slate to network designers and can be molded into an architecture also
amenable to universal Internet provisioning. Keeping in mind the great social
benefits of democratizing Internet and connectivity, we believe that the time
is ripe for emphasizing universal Internet provisioning as an important goal on
the 5G research agenda. In this paper, we investigate the opportunities and
challenges in utilizing 5G for global access to the Internet for all (GAIA). We
have also identified the major technical issues involved in a 5G-based GAIA
solution and have set up a future research agenda by defining open research
problems
Energy sustainable paradigms and methods for future mobile networks: A survey
In this survey, we discuss the role of energy in the design of future mobile
networks and, in particular, we advocate and elaborate on the use of energy
harvesting (EH) hardware as a means to decrease the environmental footprint of
5G technology. To take full advantage of the harvested (renewable) energy,
while still meeting the quality of service required by dense 5G deployments,
suitable management techniques are here reviewed, highlighting the open issues
that are still to be solved to provide eco-friendly and cost-effective mobile
architectures. Several solutions have recently been proposed to tackle
capacity, coverage and efficiency problems, including: C-RAN, Software Defined
Networking (SDN) and fog computing, among others. However, these are not
explicitly tailored to increase the energy efficiency of networks featuring
renewable energy sources, and have the following limitations: (i) their energy
savings are in many cases still insufficient and (ii) they do not consider
network elements possessing energy harvesting capabilities. In this paper, we
systematically review existing energy sustainable paradigms and methods to
address points (i) and (ii), discussing how these can be exploited to obtain
highly efficient, energy self-sufficient and high capacity networks. Several
open issues have emerged from our review, ranging from the need for accurate
energy, transmission and consumption models, to the lack of accurate data
traffic profiles, to the use of power transfer, energy cooperation and energy
trading techniques. These challenges are here discussed along with some
research directions to follow for achieving sustainable 5G systems.Comment: Accepted by Elsevier Computer Communications, 21 pages, 9 figure
Analyzing and evaluating the energy efficiency based on multi-5G small cells with a mm-waves in the next generation cellular networks
This paper evaluates the impact of multi-5G small cell systems on the energy efficiency (EE) in a Fifth Generation (5G) of cellular networks. Both the proposed model and the analysis of the EE in this study take into account (i) the path losses, fading, and shadowing that affect the received signal at the user equipment (UE) within the same cell, and (ii) the interference effects of adjacent cells. In addition, the concepts of new technologies such as large MIMO in millimeter range communication have also been considered. The simulation results show that the interference from adjacent cells can degrade the EE of a multi-cell cellular network. With the high interference the number of bits that will be transferred per joule of energy is 1.29 Mb/J with a 0.25 GHz bandwidth and 16 transmit antennas. While, with a 1 GHz bandwidth the transfer rate increases to 5.17 Mb/J. Whereas, with 64 transmit antennas the EE improved to 5.17 Mb/J with a 0.25 GHz BW and 20.70 Mb/J with a 1 GHz BW. These results provide insight into the impact of the number of antennas in millimeter range communication and the interference from adjacent cells on achieving real gains in the EE of multi-5G small cells cellular network
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
From serendipity to sustainable Green IoT: technical, industrial and political perspective
Recently, Internet of Things (IoT) has become one of the largest electronics market for hardware production due to its fast evolving application space. However, one of the key challenges for IoT hardware is the energy efficiency as most of IoT devices/objects are expected to run on batteries for months/years without a battery replacement or on harvested energy sources. Widespread use of IoT has also led to a largescale rise in the carbon footprint. In this regard, academia, industry and policy-makers are constantly working towards new energy-efficient hardware and software solutions paving the way for an emerging area referred to as green-IoT. With the direct integration and the evolution of smart communication between physical world and computer-based systems, IoT devices are also expected to reduce the total amount of energy consumption for the Information and Communication Technologies (ICT) sector.
However, in order to increase its chance of success and to help at reducing the overall energy consumption and carbon emissions a comprehensive investigation into how to achieve green-IoT is required. In this context, this paper surveys the green perspective of the IoT paradigm and aims to contribute at establishing a global approach for green-IoT environments. A comprehensive approach is presented that focuses not only on the specific solutions but also on the interaction among them, and highlights the precautions/decisions the policy makers need to take. On one side, the ongoing European projects and standardization efforts as well as industry and academia based solutions are presented and on the other side, the challenges, open issues, lessons learned and the role of policymakers towards green-IoT are discussed.
The survey shows that due to many existing open issues (e.g., technical considerations, lack of standardization, security and privacy, governance and legislation, etc.) that still need to be addressed, a realistic implementation of a sustainable green-IoT environment that could be universally accepted and deployed, is still missing
Internet of Things-aided Smart Grid: Technologies, Architectures, Applications, Prototypes, and Future Research Directions
Traditional power grids are being transformed into Smart Grids (SGs) to
address the issues in existing power system due to uni-directional information
flow, energy wastage, growing energy demand, reliability and security. SGs
offer bi-directional energy flow between service providers and consumers,
involving power generation, transmission, distribution and utilization systems.
SGs employ various devices for the monitoring, analysis and control of the
grid, deployed at power plants, distribution centers and in consumers' premises
in a very large number. Hence, an SG requires connectivity, automation and the
tracking of such devices. This is achieved with the help of Internet of Things
(IoT). IoT helps SG systems to support various network functions throughout the
generation, transmission, distribution and consumption of energy by
incorporating IoT devices (such as sensors, actuators and smart meters), as
well as by providing the connectivity, automation and tracking for such
devices. In this paper, we provide a comprehensive survey on IoT-aided SG
systems, which includes the existing architectures, applications and prototypes
of IoT-aided SG systems. This survey also highlights the open issues,
challenges and future research directions for IoT-aided SG systems
6G Enabled Smart Infrastructure for Sustainable Society: Opportunities, Challenges, and Research Roadmap
The 5G wireless communication network is currently faced with the challenge of limited data speed exacerbated by the proliferation of billions of data-intensive applications. To address this problem, researchers are developing cutting-edge technologies for the envisioned 6G wireless communication standards to satisfy the escalating wireless services demands. Though some of the candidate technologies in the 5G standards will apply to 6G wireless networks, key disruptive technologies that will guarantee the desired quality of physical experience to achieve ubiquitous wireless connectivity are expected in 6G. This article first provides a foundational background on the evolution of different wireless communication standards to have a proper insight into the vision and requirements of 6G. Second, we provide a panoramic view of the enabling technologies proposed to facilitate 6G and introduce emerging 6G applications such as multi-sensory–extended reality, digital replica, and more. Next, the technology-driven challenges, social, psychological, health and commercialization issues posed to actualizing 6G, and the probable solutions to tackle these challenges are discussed extensively. Additionally, we present new use cases of the 6G technology in agriculture, education, media and entertainment, logistics and transportation, and tourism. Furthermore, we discuss the multi-faceted communication capabilities of 6G that will contribute significantly to global sustainability and how 6G will bring about a dramatic change in the business arena. Finally, we highlight the research trends, open research issues, and key take-away lessons for future research exploration in 6G wireless communicatio
The Role of Communication Technologies in Building Future Smart Cities
The world population is continuously growing and reached a significant evolution of the society, where the number of people living in cities surpassed the number of people in rural areas. This puts national and local governments under pressure because the limited resources, such as water, electricity, and transports, must thus be optimized to cover the needs of the citizens. Therefore, different tools, from sensors to processes, service, and artificial intelligence, are used to coordinate the usage of infrastructures and assets of the cities to build the so called smart cities. Different definitions and theoretical models of smart cities are given in literature. However, smart city can usually be modelled by a layered architecture, where communication and networking layer plays a central role. In fact, smart city applications lay on collecting field data from different infrastructures and assets, processing these data, taking some intelligent control actions, and sharing information in a secure way. Thus, a two way reliable communications layer is the basis of smart cities. This chapter introduces the basic concepts of this field and focuses on the role of communication technologies in smart cities. Potential technologies for smart cities are discussed, especially the recent wireless technologies adapted to smart city requirements
- …