62 research outputs found
Single ion detection using FET based nano-sensors: a combined drift diffusion and Brownian dynamics 3D simulation study
There is an ever increasing requirement for rapid sensing mechanisms for a variety of purposes – from blood analysis to gas detection. In order to allow large throughput, these devices must also be available at low cost per unit. One method which meets these criteria is the interfacing of biological and nano-scale semiconductor elements. Using modern CMOS processing, alongside further post processing, such devices can be created for a variety of purposes. However, development of these devices is expensive and in order to investigate possible structures, a simulation system is ideal.
This work details the development, testing and utilisation of such a system. By combining two widely understood simulation methods – Brownian dynamics and drift diffusion – a mix of efficiency and accuracy is achieved. The introduction begins with a section detailing background to the field in order to set the work in context. The development and strict testing regime employed is then described. Initial simulations of a bio-nano interface are then presented with detection of ions though alterations in the drain current of a nominal 35 nm FET. This shows that there is a 5 nA/µm increase in drain current when an ion is moved through a 3 nm lipid layer which is suspended 15 nm above the oxide allowing identification of the period of traversal of the lipid layer. The final chapter indicates the successful detection of individual ions traversing a nano-pore in the presence of biologically significant ionic concentrations. The rate of change of drain current in the FET indicates a 4 σ signal during traversal with a background concentration of ions of 1 mM which allows clear identification of this individual event
Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems
We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.Peer ReviewedPostprint (published version
Carbon-Based Smart Materials
Presents technologies and key concepts to produce suitable smart materials and intelligent structures for sensing, information and communication technology, biomedical applications (drug delivery, hyperthermia therapy), self-healing, flexible memories and construction technologies. Novel developments of environmental friendly, cost-effective and scalable production processes are discussed by experts in the field
Carbon-Based Smart Materials
Presents technologies and key concepts to produce suitable smart materials and intelligent structures for sensing, information and communication technology, biomedical applications (drug delivery, hyperthermia therapy), self-healing, flexible memories and construction technologies. Novel developments of environmental friendly, cost-effective and scalable production processes are discussed by experts in the field
Recommended from our members
A hybrid piezoelectric and electrostatic energy harvester for scavenging arterial pulsations
Implantable and wearable biomedical devices suffer from a limited lifespan of on-board batteries which results in a requirement to change the battery or the device itself causing additional physical discomfort. In order to overcome this, various energy harvesters have been developed. The human body possesses several types of energy available for scavenging through appropriately designed energy harvesting devices, while cardiovascular system in particular represents a constant reliable source of mechanical energy from vibration. Most conventional energy harvesters exploit only a single phenomenon, such piezo- or triboelectricity, thus producing reduced power density. As an improvement, hybridisation of energy harvesters intends to negate this drawback by simultaneously scavenging energy by multiple harvesters.
In the present work, the reverse electrowetting on dielectric (REWOD) phenomenon is combined with the piezoelectric effect in a proof-of-concept hybrid harvester for scavenging biomechanical energy from arterial or other type pulsations. A mathematical model of the harvester was developed, and a computational investigation using CFD, and fluid-structure interaction simulations were carried out using the COMSOL Multiphysics software. The effect of the materials of piezoelectric film and geometrical features of the harvester on parameters such as the displacement, the frequency of pulsations and the energy produced were studied. An experimental setup that could imitate the displacements caused from arterial pulsations was designed and the produced electrical energy characteristics were analysed. A comparison between experimental and computational data was carried out and demonstrated a good agreement. Dependencies between geometrical parameters and electrical output were obtained, recommendation on piezoelectric materials and design solutions were provided
Surface-stress-based microcantilever aptasensor
This thesis presents the design, modelling, fabrication, and biological evaluation of a microcantilever-based aptasensor. It is the first reported work on aptasensors with aptamer immobilized on a bare SU-8 surface. Aptasensor surface funtionalisation was achieved using gas plasma treatment. Label-free detection of thrombin molecules using the aptasensor was successfully demonstrated
Recommended from our members
Roadmap on quantum nanotechnologies
Quantum phenomena are typically observable at length and time scales smaller than those of our everyday experience, often involving individual particles or excitations. The past few decades have seen a revolution in the ability to structure matter at the nanoscale, and experiments at the single particle level have become commonplace. This has opened wide new avenues for exploring and harnessing quantum mechanical effects in condensed matter. These quantum phenomena, in turn, have the potential to revolutionize the way we communicate, compute and probe the nanoscale world. Here, we review developments in key areas of quantum research in light of the nanotechnologies that enable them, with a view to what the future holds. Materials and devices with nanoscale features are used for quantum metrology and sensing, as building blocks for quantum computing, and as sources and detectors for quantum communication. They enable explorations of quantum behaviour and unconventional states in nano- and opto-mechanical systems, low-dimensional systems, molecular devices, nano-plasmonics, quantum electrodynamics, scanning tunnelling microscopy, and more. This rapidly expanding intersection of nanotechnology and quantum science/technology is mutually beneficial to both fields, laying claim to some of the most exciting scientific leaps of the last decade, with more on the horizon
- …