Time domain analysis of switching transient fields in high voltage substations

Switching operations of circuit breakers and disconnect switches generate transient currents propagating along the substation busbars. At the moment of switching, the busbars temporarily acts as antennae radiating transient electromagnetic fields within the substations. The radiated fields may interfere and disrupt normal operations of electronic equipment used within the substation for measurement, control and communication purposes. Hence there is the need to fully characterise the substation electromagnetic environment as early as the design stage of substation planning and operation to ensure safe operations of the electronic equipment. This paper deals with the computation of transient electromagnetic fields due to switching within a high voltage air-insulated substation (AIS) using the finite difference time domain (FDTD) metho

Experimental and analytical study on heat generation characteristics of a lithium-ion power battery

This document is the Accepted Manuscript version of the following article: Yongqi Xie, Shang Shi, Jincheng Tang, Hongwei Wu, and Jianzu Yu, ‘Experimental and analytical study on heat generation characteristics of a lithium-ion power battery’, International Journal of Heat and Mass Transfer, Vol. 122: 884-894, July 2018. Under embargo until 20 February 2019. The final, definitive version is available online via: https://doi.org/10.1016/j.ijheatmasstransfer.2018.02.038A combined experimental and analytical study has been performed to investigate the transient heat generation characteristics of a lithium-ion power battery in the present work. Experimental apparatus is newly built and the investigations on the charge/discharge characteristics and temperature rise behavior are carried out at ambient temperatures of 28 °C, 35 °C and 42 °C over the period of 1 C, 2 C, 3 C and 4 C rates. The thermal conductivity of a single battery cell is experimentally measured to be 5.22 W/(m K). A new transient model of heat generation rate based on the battery air cooling system is proposed. Comparison of the battery temperature between simulated results and experimental data is performed and good agreement is achieved. The impacts of the ambient temperature and charge/discharge rate on the heat generation rate are further analyzed. It is found that both ambient temperature and charge/discharge rate have significant influences on the voltage change and temperature rise as well as the heat generation rate. During charge/discharge process, the higher the current rate, the higher the heat generation rate. The effect of the ambient temperature on the heat generation demonstrates a remarkable difference at different charge states.Peer reviewe

Self-consistent modeling of laminar electrohydrodynamic plumes from ultrasharp needles in cyclohexane

This paper presents a self-consistent model of electrohydrodynamic (EHD) laminar plumes produced by electron injection from ultra-sharp needle tips in cyclohexane. Since the density of electrons injected into the liquid is well described by the Fowler-Nordheim field emission theory, the injection law is not assumed. Furthermore, the generation of electrons in cyclohexane and their conversion into negative ions is included in the analysis. Detailed steady-state characteristics of EHD plumes under weak injection and space-charge limited injection are studied. It is found that the plume characteristics far from both electrodes and under weak injection can be accurately described with an asymptotic simplified solution proposed by Vazquez et al. Physics of Fluids 12, 2809 (2000) when the correct longitudinal electric field distribution and liquid velocity radial profile are used as input. However, this asymptotic solution deviates from the self-consistently calculated plume parameters under space-charge limited injection since it neglects the radial variations of the electric field produced by a highdensity charged core. In addition, no significant differences in the model estimates of the plume are found when the simulations are obtained either with the Finite Element Method or with a diffusion-free particle method. It is shown that the model also enables the calculation of the current-voltage (IV) characteristic of EHD laminar plumes produced by electron field emission, with good agreement with measured values reported in the literature.Ministerio de Economía y Competitividad FIS2014-54539-P

An adaptive Cartesian embedded boundary approach for fluid simulations of two- and three-dimensional low temperature plasma filaments in complex geometries

We review a scalable two- and three-dimensional computer code for low-temperature plasma simulations in multi-material complex geometries. Our approach is based on embedded boundary (EB) finite volume discretizations of the minimal fluid-plasma model on adaptive Cartesian grids, extended to also account for charging of insulating surfaces. We discuss the spatial and temporal discretization methods, and show that the resulting overall method is second order convergent, monotone, and conservative (for smooth solutions). Weak scalability with parallel efficiencies over 70\% are demonstrated up to 8192 cores and more than one billion cells. We then demonstrate the use of adaptive mesh refinement in multiple two- and three-dimensional simulation examples at modest cores counts. The examples include two-dimensional simulations of surface streamers along insulators with surface roughness; fully three-dimensional simulations of filaments in experimentally realizable pin-plane geometries, and three-dimensional simulations of positive plasma discharges in multi-material complex geometries. The largest computational example uses up to $800$ million mesh cells with billions of unknowns on $4096$ computing cores. Our use of computer-aided design (CAD) and constructive solid geometry (CSG) combined with capabilities for parallel computing offers possibilities for performing three-dimensional transient plasma-fluid simulations, also in multi-material complex geometries at moderate pressures and comparatively large scale.Comment: 40 pages, 21 figure

Automated Netlist Generation for 3D Electrothermal and Electromagnetic Field Problems

We present a method for the automatic generation of netlists describing general three-dimensional electrothermal and electromagnetic field problems. Using a pair of structured orthogonal grids as spatial discretisation, a one-to-one correspondence between grid objects and circuit elements is obtained by employing the finite integration technique. The resulting circuit can then be solved with any standard available circuit simulator, alleviating the need for the implementation of a custom time integrator. Additionally, the approach straightforwardly allows for field-circuit coupling simulations by appropriately stamping the circuit description of lumped devices. As the computational domain in wave propagation problems must be finite, stamps representing absorbing boundary conditions are developed as well. Representative numerical examples are used to validate the approach. The results obtained by circuit simulation on the generated netlists are compared with appropriate reference solutions.Comment: This is a pre-print of an article published in the Journal of Computational Electronics. The final authenticated version is available online at: https://dx.doi.org/10.1007/s10825-019-01368-6. All numerical results can be reproduced by the Matlab code openly available at https://github.com/tc88/ANTHE