17,449 research outputs found
Unified clustering and communication protocol for wireless sensor networks
In this paper we present an energy-efficient cross layer protocol for providing application specific reservations in wireless senor networks called the “Unified Clustering and Communication Protocol ” (UCCP). Our modular cross layered framework satisfies three wireless sensor network requirements, namely, the QoS requirement of heterogeneous applications, energy aware clustering and data forwarding by relay sensor nodes. Our unified design approach is motivated by providing an integrated and viable solution for self organization and end-to-end communication is wireless sensor networks. Dynamic QoS based reservation guarantees are provided using a reservation-based TDMA approach. Our novel energy-efficient clustering approach employs a multi-objective optimization technique based on OR (operations research) practices. We adopt a simple hierarchy in which relay nodes forward data messages from cluster head to the sink, thus eliminating the overheads needed to maintain a routing protocol. Simulation results demonstrate that UCCP provides an energy-efficient and scalable solution to meet the application specific QoS demands in resource constrained sensor nodes. Index Terms — wireless sensor networks, unified communication, optimization, clustering and quality of service
A Cross-Layer Approach for Minimizing Interference and Latency of Medium Access in Wireless Sensor Networks
In low power wireless sensor networks, MAC protocols usually employ periodic
sleep/wake schedule to reduce idle listening time. Even though this mechanism
is simple and efficient, it results in high end-to-end latency and low
throughput. On the other hand, the previously proposed CSMA/CA-based MAC
protocols have tried to reduce inter-node interference at the cost of increased
latency and lower network capacity. In this paper we propose IAMAC, a CSMA/CA
sleep/wake MAC protocol that minimizes inter-node interference, while also
reduces per-hop delay through cross-layer interactions with the network layer.
Furthermore, we show that IAMAC can be integrated into the SP architecture to
perform its inter-layer interactions. Through simulation, we have extensively
evaluated the performance of IAMAC in terms of different performance metrics.
Simulation results confirm that IAMAC reduces energy consumption per node and
leads to higher network lifetime compared to S-MAC and Adaptive S-MAC, while it
also provides lower latency than S-MAC. Throughout our evaluations we have
considered IAMAC in conjunction with two error recovery methods, i.e., ARQ and
Seda. It is shown that using Seda as the error recovery mechanism of IAMAC
results in higher throughput and lifetime compared to ARQ.Comment: 17 pages, 16 figure
Markov Decision Processes with Applications in Wireless Sensor Networks: A Survey
Wireless sensor networks (WSNs) consist of autonomous and resource-limited
devices. The devices cooperate to monitor one or more physical phenomena within
an area of interest. WSNs operate as stochastic systems because of randomness
in the monitored environments. For long service time and low maintenance cost,
WSNs require adaptive and robust methods to address data exchange, topology
formulation, resource and power optimization, sensing coverage and object
detection, and security challenges. In these problems, sensor nodes are to make
optimized decisions from a set of accessible strategies to achieve design
goals. This survey reviews numerous applications of the Markov decision process
(MDP) framework, a powerful decision-making tool to develop adaptive algorithms
and protocols for WSNs. Furthermore, various solution methods are discussed and
compared to serve as a guide for using MDPs in WSNs
E2XLRADR (Energy Efficient Cross Layer Routing Algorithm with Dynamic Retransmission for Wireless Sensor Networks)
The main focus of this article is to achieve prolonged network lifetime with
overall energy efficiency in wireless sensor networks through controlled
utilization of limited energy. Major percentage of energy in wireless sensor
network is consumed during routing from source to destination, retransmission
of data on packet loss. For improvement, cross layered algorithm is proposed
for routing and retransmission scheme. Simulation and results shows that this
approach can save the overall energy consumptio
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each others’ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applications’ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
Distributed Optimal Rate-Reliability-Lifetime Tradeoff in Wireless Sensor Networks
The transmission rate, delivery reliability and network lifetime are three
fundamental but conflicting design objectives in energy-constrained wireless
sensor networks. In this paper, we address the optimal
rate-reliability-lifetime tradeoff with link capacity constraint, reliability
constraint and energy constraint. By introducing the weight parameters, we
combine the objectives at rate, reliability, and lifetime into a single
objective to characterize the tradeoff among them. However, the optimization
formulation of the rate-reliability-reliability tradeoff is neither separable
nor convex. Through a series of transformations, a separable and convex problem
is derived, and an efficient distributed Subgradient Dual Decomposition
algorithm (SDD) is proposed. Numerical examples confirm its convergence. Also,
numerical examples investigate the impact of weight parameters on the rate
utility, reliability utility and network lifetime, which provide a guidance to
properly set the value of weight parameters for a desired performance of WSNs
according to the realistic application's requirements.Comment: 27 pages, 10 figure
- …