Data and Energy Integrated Communication Networks for Wireless Big Data

This paper describes a new type of communication network called data and energy integrated communication networks (DEINs), which integrates the traditionally separate two processes, i.e., wireless information transfer (WIT) and wireless energy transfer (WET), fulfilling co-transmission of data and energy. In particular, the energy transmission using radio frequency is for the purpose of energy harvesting (EH) rather than information decoding. One driving force of the advent of DEINs is wireless big data, which comes from wireless sensors that produce a large amount of small piece of data. These sensors are typically powered by battery that drains sooner or later and will have to be taken out and then replaced or recharged. EH has emerged as a technology to wirelessly charge batteries in a contactless way. Recent research work has attempted to combine WET with WIT, typically under the label of simultaneous wireless information and power transfer. Such work in the literature largely focuses on the communication side of the whole wireless networks with particular emphasis on power allocation. The DEIN communication network proposed in this paper regards the convergence of WIT and WET as a full system that considers not only the physical layer but also the higher layers, such as media access control and information routing. After describing the DEIN concept and its high-level architecture/protocol stack, this paper presents two use cases focusing on the lower layer and the higher layer of a DEIN network, respectively. The lower layer use case is about a fair resource allocation algorithm, whereas the high-layer section introduces an efficient data forwarding scheme in combination with EH. The two case studies aim to give a better explanation of the DEIN concept. Some future research directions and challenges are also pointed out

Energy sustainable paradigms and methods for future mobile networks: A survey

In this survey, we discuss the role of energy in the design of future mobile networks and, in particular, we advocate and elaborate on the use of energy harvesting (EH) hardware as a means to decrease the environmental footprint of 5G technology. To take full advantage of the harvested (renewable) energy, while still meeting the quality of service required by dense 5G deployments, suitable management techniques are here reviewed, highlighting the open issues that are still to be solved to provide eco-friendly and cost-effective mobile architectures. Several solutions have recently been proposed to tackle capacity, coverage and efficiency problems, including: C-RAN, Software Defined Networking (SDN) and fog computing, among others. However, these are not explicitly tailored to increase the energy efficiency of networks featuring renewable energy sources, and have the following limitations: (i) their energy savings are in many cases still insufficient and (ii) they do not consider network elements possessing energy harvesting capabilities. In this paper, we systematically review existing energy sustainable paradigms and methods to address points (i) and (ii), discussing how these can be exploited to obtain highly efficient, energy self-sufficient and high capacity networks. Several open issues have emerged from our review, ranging from the need for accurate energy, transmission and consumption models, to the lack of accurate data traffic profiles, to the use of power transfer, energy cooperation and energy trading techniques. These challenges are here discussed along with some research directions to follow for achieving sustainable 5G systems.Comment: Accepted by Elsevier Computer Communications, 21 pages, 9 figure

On Energy Allocation and Data Scheduling in Backscatter Networks with Multi-antenna Readers

In this paper, we study the throughput utility functions in buffer-equipped monostatic backscatter communication networks with multi-antenna Readers. In the considered model, the backscatter nodes (BNs) store the data in their buffers before transmission to the Reader. We investigate three utility functions, namely, the sum, the proportional and the common throughput. We design online admission policies, corresponding to each utility function, to determine how much data can be admitted in the buffers. Moreover, we propose an online data link control policy for jointly controlling the transmit and receive beamforming vectors as well as the reflection coefficients of the BNs. The proposed policies for data admission and data link control jointly optimize the throughput utility, while stabilizing the buffers. We adopt the min-drift-plus-penalty (MDPP) method in designing the control policies. Following the MDPP method, we cast the optimal data link control and the data admission policies as solutions of two independent optimization problems which should be solved in each time slot. The optimization problem corresponding to the data link control is non-convex and does not have a trivial solution. Using Lagrangian dual and quadratic transforms, we find a closed-form iterative solution. Finally, we use the results on the achievable rates of finite blocklength codes to study the system performance in the cases with short packets. As demonstrated, the proposed policies achieve optimal utility and stabilize the data buffers in the BNs

Energy-efficient wireless communication

In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters

Dual-battery empowered green cellular networks

With awareness of the potential harmful effects to the environment and climate change, on-grid brown energy consumption of information and communications technology (ICT) has drawn much attention. Cellular base stations (BSs) are among the major energy guzzlers in ICT, and their contributions to the global carbon emissions increase sustainedly. It is essential to leverage green energy to power BSs to reduce their on-grid brown energy consumption. However, in order to furthest save on-grid brown energy and decrease the on-grid brown energy electricity expenses, most existing green energy related works only pursue to maximize the green energy utilization while compromising the services received by the mobile users. In reality, dissatisfaction of services may eventually lead to loss of market shares and profits of the network providers. In this research, a dual-battery enabled profit driven user association scheme is introduced to jointly consider the traffic delivery latency and green energy utilization to maximize the profits for the network providers in heterogeneous cellular networks. Since this profit driven user association optimization problem is NP-hard, some heuristics are presented to solve the problem with low computational complexity. Finally, the performance of the proposed algorithm is validated through extensive simulations. In addition, the Internet of Things (IoT) heralds a vision of future Internet where all physical things/devices are connected via a network to promote a heightened level of awareness about our world and dramatically improve our daily lives. Nonetheless, most wireless technologies utilizing unlicensed bands cannot provision ubiquitous and quality IoT services. In contrast, cellular networks support large-scale, quality of service guaranteed, and secured communications. However, tremendous proximal communications via local BSs will lead to severe traffic congestion and huge energy consumption in conventional cellular networks. Device-to-device (D2D) communications can potentially offload traffic from and reduce energy consumption of BSs. In order to realize the vision of a truly global IoT, a novel architecture, i.e., overlay-based green relay assisted D2D communications with dual batteries in heterogeneous cellular networks, is introduced. By optimally allocating the network resource, the introduced resource allocation method provisions the IoT services and minimizes the overall energy consumption of the pico relay BSs. By balancing the residual green energy among the pico relay BSs, the green energy utilization is maximized; this furthest saves the on-grid energy. Finally, the performance of the proposed architecture is validated through extensive simulations. Furthermore, the mobile devices serve the important roles in cellular networks and IoT. With the ongoing worldwide development of IoT, an unprecedented number of edge devices imperatively consume a substantial amount of energy. The overall IoT mobile edge devices have been predicted to be the leading energy guzzler in ICT by 2020. Therefore, a three-step green IoT architecture is proposed, i.e., ambient energy harvesting, green energy wireless transfer and green energy balancing, in this research. The latter step reinforces the former one to ensure the availability of green energy. The basic design principles for these three steps are laid out and discussed. In summary, based on the dual-battery architecture, this dissertation research proposes solutions for the three aspects, i.e., green cellular BSs, green D2D communications and green devices, to hopefully and eventually actualize green cellular access networks, as part of the ongoing efforts in greening our society and environment

A real-time packet scheduling system for a 6LoWPAN industrial application

Nowadays, the industrial Wireless Sensor Networks (WSN) are crucial for the monitoring and control of the modern smart factory floor that is relying on them for critical applications and tasks that were performed by wired systems in the past. For this reason, it is required that the transmission mechanisms of wireless sensor networks are efficient and robust and that they guarantee realtime responses with low data losses. Furthermore, it is required that they utilize common networking standards, such as the Internet Protocol (IP), that provides interoperability with already existing infrastructures and offers widely tested security and transmission control protocols. The theoretical part of this document focuses on the description of the current panorama of the industrial WSN, its applications, design challenges and standardizations. It describes the 6LoWPAN standard and the wireless transmission technology that it uses for its lower layers, the IEEE 802.15.4 protocol. Later, it describes the principles behind the wireless scheduling, a state-of-the-art in the IEEE 802.15.4 scheduled channel access and the features of the most used operating systems for WSN. The practical part presents the real-time packet scheduling system for a 6LoWPAN industrial application proposed by this thesis work that adapts the HSDPA scheduling mechanisms to the IEEE 802.15.4 beacon-enabled mode. The system implemented manages the channel access by allocating Guaranteed Time Slots to sensor nodes according to the priority given by three scheduling algorithms that can be selected according to the traffic condition of the network. The system proposed was programmed using Contiki OS. It is based on the eSONIA 6LoWPAN firmware developed for the European Research Project and it was deployed on the FAST WSN for testing. The results, discussion and conclusions are documented at the final sections of this part