4,511 research outputs found
Recommended from our members
Scalable and network aware video coding for advanced communications over heterogeneous networks
This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel UniversityThis work addresses the issues concerned with the provision of scalable video services over heterogeneous networks particularly with regards to dynamic adaptation and user’s acceptable quality of service.
In order to provide and sustain an adaptive and network friendly multimedia communication service, a suite of techniques that achieved automatic scalability and adaptation are developed. These techniques are evaluated objectively and subjectively to assess the Quality of Service (QoS) provided to diverse users with variable constraints and dynamic resources. The research ensured the consideration of various levels of user acceptable QoS The techniques are further evaluated with view to establish their performance against state of the art scalable and non-scalable techniques.
To further improve the adaptability of the designed techniques, several experiments and real time simulations are conducted with the aim of determining the optimum performance with various coding parameters and scenarios. The coding parameters and scenarios are evaluated and analyzed to determine their performance using various types of video content and formats. Several algorithms are developed to provide a dynamic adaptation of coding tools and parameters to specific video content type, format and bandwidth of transmission.
Due to the nature of heterogeneous networks where channel conditions, terminals, users capabilities and preferences etc are unpredictably changing, hence limiting the adaptability of a specific technique adopted, a Dynamic Scalability Decision Making Algorithm (SADMA) is developed. The algorithm autonomously selects one of the designed scalability techniques basing its decision on the monitored and reported channel conditions. Experiments were conducted using a purpose-built heterogeneous network simulator and the network-aware selection of the scalability techniques is based on real time simulation results. A technique with a minimum delay, low bit-rate, low frame rate and low quality is adopted as a reactive measure to a predicted bad channel condition. If the use of the techniques is not favoured due to deteriorating channel conditions reported, a reduced layered stream or base layer is used. If the network status does not allow the use of the base layer, then the stream uses parameter identifiers with high efficiency to improve the scalability and adaptation of the video service.
To further improve the flexibility and efficiency of the algorithm, a dynamic de-blocking filter and lambda value selection are analyzed and introduced in the algorithm. Various methods, interfaces and algorithms are defined for transcoding from one technique to another and extracting sub-streams when the network conditions do not allow for the transmission of the entire bit-stream
Motion estimation and CABAC VLSI co-processors for real-time high-quality H.264/AVC video coding
Real-time and high-quality video coding is gaining a wide interest in the research and industrial community for different applications. H.264/AVC, a recent standard for high performance video coding, can be successfully exploited in several scenarios including digital video broadcasting, high-definition TV and DVD-based systems, which require to sustain up to tens of Mbits/s. To that purpose this paper proposes optimized architectures for H.264/AVC most critical tasks, Motion estimation and context adaptive binary arithmetic coding. Post synthesis results on sub-micron CMOS standard-cells technologies show that the proposed architectures can actually process in real-time 720 Ă— 480 video sequences at 30 frames/s and grant more than 50 Mbits/s. The achieved circuit complexity and power consumption budgets are suitable for their integration in complex VLSI multimedia systems based either on AHB bus centric on-chip communication system or on novel Network-on-Chip (NoC) infrastructures for MPSoC (Multi-Processor System on Chip
Efficient algorithms for scalable video coding
A scalable video bitstream specifically designed for the needs of various client terminals,
network conditions, and user demands is much desired in current and future video transmission
and storage systems. The scalable extension of the H.264/AVC standard (SVC) has
been developed to satisfy the new challenges posed by heterogeneous environments, as
it permits a single video stream to be decoded fully or partially with variable quality, resolution,
and frame rate in order to adapt to a specific application. This thesis presents
novel improved algorithms for SVC, including: 1) a fast inter-frame and inter-layer coding
mode selection algorithm based on motion activity; 2) a hierarchical fast mode selection
algorithm; 3) a two-part Rate Distortion (RD) model targeting the properties of different
prediction modes for the SVC rate control scheme; and 4) an optimised Mean Absolute
Difference (MAD) prediction model.
The proposed fast inter-frame and inter-layer mode selection algorithm is based on the
empirical observation that a macroblock (MB) with slow movement is more likely to be
best matched by one in the same resolution layer. However, for a macroblock with fast
movement, motion estimation between layers is required. Simulation results show that
the algorithm can reduce the encoding time by up to 40%, with negligible degradation in
RD performance.
The proposed hierarchical fast mode selection scheme comprises four levels and makes
full use of inter-layer, temporal and spatial correlation aswell as the texture information of
each macroblock. Overall, the new technique demonstrates the same coding performance
in terms of picture quality and compression ratio as that of the SVC standard, yet produces
a saving in encoding time of up to 84%. Compared with state-of-the-art SVC fast mode
selection algorithms, the proposed algorithm achieves a superior computational time reduction
under very similar RD performance conditions.
The existing SVC rate distortion model cannot accurately represent the RD properties of
the prediction modes, because it is influenced by the use of inter-layer prediction. A separate
RD model for inter-layer prediction coding in the enhancement layer(s) is therefore
introduced. Overall, the proposed algorithms improve the average PSNR by up to 0.34dB
or produce an average saving in bit rate of up to 7.78%. Furthermore, the control accuracy
is maintained to within 0.07% on average.
As aMADprediction error always exists and cannot be avoided, an optimisedMADprediction
model for the spatial enhancement layers is proposed that considers the MAD from
previous temporal frames and previous spatial frames together, to achieve a more accurateMADprediction.
Simulation results indicate that the proposedMADprediction model
reduces the MAD prediction error by up to 79% compared with the JVT-W043 implementation
Cross-layer Optimized Wireless Video Surveillance
A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system.
The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion.
In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality.
The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos.
In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work.
Adviser: Song C
Cross-layer Optimized Wireless Video Surveillance
A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system.
The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion.
In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality.
The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos.
In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work.
Adviser: Song C
- …