6,699 research outputs found
Experimental study of a transformer with superconducting elements for fault current limitation and energy redistribution
Numerous proposed and developed superconducting fault current limiters and
self-limiting transformers limit successfully fault currents but do not provide
uninterrupted supplying of consumers. A design investigated in the work
combines the functions of a conventional transformer with the functions of fast
energy redistribution and fault protection. The device constitutes a
transformer containing an additional high-temperature superconducting (HTS)
coil short-circuited by a thin film HTS switching element. Fault current
limitation and redistribution of the power flow to a standby line are achieved
as a result of a fast transition of the superconducting switching element from
the superconducting into the normal state. Transient and steady-state
characteristics were experimentally investigated. A mathematical model of the
device operation was proposed, and the calculated results were found to be in
good agreement with the experimental data. The application field and basic
requirements to such devices were discussed and it was shown that the proposed
device meets these requirements.Comment: 15 pages incl. 4 figures. Submitted to "Cryogenics
Monitoring and Fault Location Sensor Network for Underground Distribution Lines
One of the fundamental tasks of electric distribution utilities is guaranteeing a continuous
supply of electricity to their customers. The primary distribution network is a critical part of these
facilities because a fault in it could affect thousands of customers. However, the complexity of
this network has been increased with the irruption of distributed generation, typical in a Smart
Grid and which has significantly complicated some of the analyses, making it impossible to apply
traditional techniques. This problem is intensified in underground lines where access is limited. As a
possible solution, this paper proposes to make a deployment of a distributed sensor network along
the power lines. This network proposes taking advantage of its distributed character to support new
approaches of these analyses. In this sense, this paper describes the aquiculture of the proposed
network (adapted to the power grid) based on nodes that use power line communication and energy
harvesting techniques. In this sense, it also describes the implementation of a real prototype that
has been used in some experiments to validate this technological adaptation. Additionally, beyond
a simple use for monitoring, this paper also proposes the use of this approach to solve two typical
distribution system operator problems, such as: fault location and failure forecasting in power cables.Ministerio de Economía y Competitividad, Government of Spain project Sistema Inteligente Inalámbrico para Análisis y Monitorización de Líneas de Tensión Subterráneas en Smart Grids (SIIAM) TEC2013-40767-RMinisterio de Educación, Cultura y Deporte, Government of Spain, for the funding of the scholarship Formación de Profesorado Universitario 2016 (FPU 2016
Integration of conventional and unconventional Instrument Transformers in Smart Grids
In this thesis the reader will be guided towards the role of Instrument Transformers inside the always evolving Smart Grid scenario. In particular, even non-experts or non-metrologists will have the chance to follow the main concepts presented; this, because the basic principles are always presented before moving to in-deep discussions.
The chapter including the results of the work is preceded by three introductive chapters. These, contain the basic principles and the state of the art necessary to provide the reader the tools to approach the results chapter.
The first three chapters describe: Instrument Transformers, Standards, and Metrology. In the first chapter, the studied Instrument Transformers are described and compared with particular attention to their accuracy parameters. In the second chapter instead, two fundamental international documents, concerning Instrument Transformers, are analysed: the IEC 61869 series and the EN 50160. This has been done to be completely aware of how transformers are standardized and regulated. Finally, the last introductive chapter presents one of the pillars of this work: metrology and the role of uncertainty.
In the core of the work Instrument Transformers integration in Smart Grid is distinguished in two main topics. The first assesses the transformers behaviour, in terms of accuracy, when their normal operation is affected by external quantities. The second exploits the current and voltage measurements obtained from the transformers to develop new algorithm and techniques to face typical and new issue affecting Smart Grids.
In the overall, this thesis has a bifold aim. On one hand it provides a quite-detailed overview on Instrument Transformers technology and state of the art. On the other hand, it describes issues and novelties concerning the use of the transformers among Smart Grids, focusing on the role of uncertainty when their measurements are used for common and critical applications
On the long-period accuracy behavior of inductive and low-power instrument transformers
The accuracy evaluation of instrument transformers is always a key task when proper control and management of the power network is required. In particular, accuracy becomes a critical aspect when the grid or the instrumentation itself is operating at conditions different from the rated ones. However, before focusing on the above non-rated conditions, it is important to fully understand the instrument transformer behavior at rated conditions. To this end, this work analyzed the accuracy behavior of legacy, inductive, and low-power voltage transformers over long periods of time. The aim was to find patterns and correlations that may be of help during the modelling or the output prediction of voltage transformers. From the results, the main differences between low-power and inductive voltage transformers were pointed out and described in detail
Ultra-Low-Power Superconductor Logic
We have developed a new superconducting digital technology, Reciprocal
Quantum Logic, that uses AC power carried on a transmission line, which also
serves as a clock. Using simple experiments we have demonstrated zero static
power dissipation, thermally limited dynamic power dissipation, high clock
stability, high operating margins and low BER. These features indicate that the
technology is scalable to far more complex circuits at a significant level of
integration. On the system level, Reciprocal Quantum Logic combines the high
speed and low-power signal levels of Single-Flux- Quantum signals with the
design methodology of CMOS, including low static power dissipation, low latency
combinational logic, and efficient device count.Comment: 7 pages, 5 figure
Are inductive current transformers performance really affected by actual distorted network conditions? An experimental case study
The aim of this work is to assess whether actual distorted conditions of the network are really affecting the accuracy of inductive current transformers. The study started from the need to evaluate the accuracy performance of inductive current transformers in off-nominal conditions, and to improve the related standards. In fact, standards do not provide a uniform set of distorted waveforms to be applied on inductive or low-power instrument transformers. Moreover, there is no agreement yet, among the experts, about how to evaluate the uncertainty of the instrument transformer when the operating conditions are different from the rated ones. To this purpose, the authors collected currents from the power network and injected them into two off-the-shelf current transformers. Then, their accuracy performances have been evaluated by means of the well-known composite error index and an approximated version of it. The obtained results show that under realistic non-rated conditions of the network, the tested transformers show a very good behavior considering their nonlinear nature, arising the question in the title. A secondary result is that the use of the composite error should be more and more supported by the standards, considering its effectiveness in the accuracy evaluation of instrument transformers for measuring purposes
Uncertainty analysis of a test bed for calibrating voltage transformers vs.Temperature
The paper addresses the evaluation of the uncertainty sources of a test bed system for calibrating voltage transformers vs. temperature. In particular, the Monte Carlo method has been applied in order to evaluate the effects of the uncertainty sources in two different conditions: by using the nominal accuracy specifications of the elements which compose the setup, or by exploiting the results of their metrological characterization. In addition, the influence of random effects on the system accuracy has been quantified and evaluated. From the results, it emerges that the choice of the uncertainty evaluation method affects the overall study. As a matter of fact, the use of a metrological characterization or of accuracy specifications provided by the manufacturers provides respectively an accuracy of 0.1 and 0.5 for the overall measurement setup
Developments for the high frequency power transformer design and implementation
The thesis considers design and manufacturing of ferrite based high frequency power transformers. The primary aim of the work was to study core and winding losses and in particular thermal modeling of high frequency power transformers and to determine appropriate loss and temperature rise modeling methods for power converter applications. The secondary aim of the work was to study improved, mass manufacturable winding methods for toroidal, tube-type planar and disc-type planar high frequency power transformers.
The analytical high frequency power transformer design equations for core and winding losses and transformer temperature rise were reviewed from literature, formulated for spreadsheet type calculations using excitation, material, geometry and winding implementation parameters and validated by in circuit temperature rise comparisons between calculated and measured values using regression analysis. The core and winding loss calculation methods in literature were found to provide appropriate accuracy for the practical design purposes. Thermal test block tests suggested a slight modification for analytical convective heat transfer equation from the literature. The results from in circuit temperature rise comparisons suggest that the transformer total losses can be predicted with the average standard error below 0.2 W with datasheet type information only. Further, if conductive thermal resistance from transformer via printed circuit board substrate to ambient is available the transformer operating temperature could be predicted with appropriate accuracy (5.6 °C) as well.
The new manufacturing methods developed for toroidal, tube and disc-type transformer geometries were proved to be suitable for high frequency operation. With a common mode choke with static shield and windings deposited and etched directly on the toroidal NiZn core a transfer loss resonant frequency above 1.2 GHz was achieved. A multilayer foil winding with interleaved primary and secondary layers resulted resulted leakage inductance of 10 % of the value achieved using a wire-wound winding. The new developments for Z-folded inductive components resulted material cost savings, reduction of winding resistance and adjustability of leakage inductance and winding capacitances.reviewe
- …