Investigating data throughput and partial dynamic reconfiguration in a commodity FPGA cluster framework

There are many computational kernels where parallelism can be exploited in applica- tion specific hardware, yielding significant speedup over a general purpose processor based solution. Commodity cluster computing technologies have been combined with FPGA co- processors, resulting in even greater performance capability through the exploitation of multiple levels of parallelism. One particularly economic solution both in terms of cost and power consumption is to cluster hybrid FPGAs with commodity network intercon- nects. Hybrid FPGAs combine embedded microprocessors with reconfigurable hardware resources on a single chip offering lower power consumption and cost compared to a tra- ditional I/O bus FPGA coprocessor solution. While there is a lot of promise in using com- modity hybrid FPGAs in a cluster configuration, the design flow and performance char- acteristics of such systems are currently a limiting factor to the range of applications that could benefit from such a system. The contribution of this thesis is a framework for clustering commodity FPGAs which integrates high speed DMA data transfers with a flexible FPGA resource sharing scheme enabled through partial reconfiguration. The framework includes an embedded Linux op- erating system, with a custom device driver to manage data transfers and hardware recon- figuration. User space tools for cluster computing including ssh and MPI are deployed allowing tasks to be split among nodes in the cluster. Performance analysis is performed with a homogeneous cluster composed of four Virtex-5 FXT based FPGA boards. The results demonstrate the advantages over previous work in terms of data throughput and reconfiguration, as well as promote future research efforts

A Task-Graph Execution Manager for Reconfigurable Multi-tasking Systems

Reconfigurable hardware can be used to build multi tasking systems that dynamically adapt themselves to the requirements of the running applications. This is especially useful in embedded systems, since the available resources are very limited and the reconfigurable hardware can be reused for different applications. In these systems computations are frequently represented as task graphs that are executed taking into account their internal dependencies and the task schedule. The management of the task graph execution is critical for the system performance. In this regard, we have developed two dif erent versions, a software module and a hardware architecture, of a generic task-graph execution manager for reconfigurable multi-tasking systems. The second version reduces the run-time management overheads by almost two orders of magnitude. Hence it is especially suitable for systems with exigent timing constraints. Both versions include specific support to optimize the reconfiguration process

VEGa : a high performance vehicular Ethernet gateway on hybrid FPGA

Modern vehicles employ a large amount of distributed computation and require the underlying communication scheme to provide high bandwidth and low latency. Existing communication protocols like Controller Area Network (CAN) and FlexRay do not provide the required bandwidth, paving the way for adoption of Ethernet as the next generation network backbone for in-vehicle systems. Ethernet would co-exist with safety-critical communication on legacy networks, providing a scalable platform for evolving vehicular systems. This requires a high-performance network gateway that can simultaneously handle high bandwidth, low latency, and isolation; features that are not achievable with traditional processor based gateway implementations. We present VEGa, a configurable vehicular Ethernet gateway architecture utilising a hybrid FPGA to closely couple software control on a processor with dedicated switching circuit on the reconfigurable fabric. The fabric implements isolated interface ports and an accelerated routing mechanism, which can be controlled and monitored from software. Further, reconfigurability enables the switching behaviour to be altered at run-time under software control, while the configurable architecture allows easy adaptation to different vehicular architectures using high-level parameter settings. We demonstrate the architecture on the Xilinx Zynq platform and evaluate the bandwidth, latency, and isolation using extensive tests in hardware

Hardware Acceleration in Genode OS Using Dynamic Partial Reconfiguration

Algorithms with operations on large regular data structures such as image processing can be highly accelerated when executed as hardware tasks in an FPGA fabric. The Dynamic Partial Reconfiguration (DPR) feature of new SRAM-based FPGA families allows a dynamic swapping and replacement of hardware tasks during runtime. Particularly embedded systems with processing chains that change over time or that are too large to be implemented in an FPGA fabric in parallel, benefit from DPR. In this paper we present a complete framework for hardware acceleration using DPR in the microkernel based Genode OS. This makes the DPR feature available not only for the high-performance computing field, but also for safety-critical applications. The new framework is evaluated for an exemplary imaging application running on a Xilinx Zynq-7000 SoC

Automated routing and control of silicon photonic switch fabrics

Automatic reconfiguration and feedback controlled routing is demonstrated in an 8×8 silicon photonic switch fabric based on Mach-Zehnder interferometers. The use of non-invasive Contactless Integrated Photonic Probes (CLIPPs) enables real-time monitoring of the state of each switching element individually. Local monitoring provides direct information on the routing path, allowing an easy sequential tuning and feedback controlled stabilization of the individual switching elements, thus making the switch fabric robust against thermal crosstalk, even in the absence of a cooling system for the silicon chip. Up to 24 CLIPPs are interrogated by a multichannel integrated ASIC wire-bonded to the photonic chip. Optical routing is demonstrated on simultaneous WDM input signals that are labelled directly on-chip by suitable pilot tones without affecting the quality of the signals. Neither preliminary circuit calibration nor lookup tables are required, being the proposed control scheme inherently insensible to channels power fluctuations

Virtualized FPGA accelerators for efficient cloud computing

Hardware accelerators implement custom architectures to significantly speed up computations in a wide range of domains. As performance scaling in server-class CPUs slows, we propose the integration of hardware accelerators in the cloud as a way to maintain a positive performance trend. Field programmable gate arrays (FPGAs) represent the ideal way to integrate accelerators in the cloud, since they can be reprogrammed as needs change and allow multiple accelerators to share optimised communication infrastructure. We discuss a framework that integrates reconfigurable accelerators in a standard server with virtualised resource management and communication. We then present a case study that quantifies the efficiency benefits and break-even point for integrating FPGAs in the cloud