Cross-Layer Platform for Dynamic, Energy-Efficient Optical Networks

The design of the next-generation Internet infrastructure is driven by the need to sustain the massive growth in bandwidth demands. Novel, energy-efficient, optical networking technologies and architectures are required to effectively meet the stringent performance requirements with low cost and ultrahigh energy efficiencies. In this thesis, a cross-layer communications platform is proposed to enable greater intelligence and functionality on the physical layer. Providing the optical layer with advanced networking capabilities will facilitate the dynamic management and optimization of optical switching based on performance monitoring measurements and higher-layer attributes. The cross-layer platform aims to create a new framework for networks to incorporate packet-scale measurement subsystems and techniques for monitoring the health of the optical channel. This will allow for quality-of-service- and energy-aware routing schemes, as well as an enhanced awareness of the optical data signals. This thesis first presents the design and development of an optical packet switching fabric. Leveraging a networking test-bed environment to validate networking hypotheses, advanced switching functionalities are demonstrated, including the support for quality-of-service based routing and packet multicasting. The investigated cross-layering is based on emerging optical technologies, enabling packet protection techniques and packet-rate switching fabric reconfiguration. Coupled with fast performance monitoring, the platform will achieve significant performance gains within the endeavor of all-optical switching. Allowing for a more intelligent, programmable optical layer aims to support greater flexibility with respect to bandwidth allocation and potentially a significant reduction in the network's energy consumption. The ultimate deliverable of this work is a high-performance, cross-layer enabled optical network node. The experimental demonstration of an initial prototype creates a dynamic network element with distributed control plane management, featuring fast packet-rate optical switching capabilities and embedded physical-layer performance monitoring modules. The cross-layer box enables an intelligent traffic delivery system that can dynamically manipulate optical switching on a packet-granular scale. With the goal of achieving advanced multi-layer routing and control algorithms, the network node requires an intelligent co-optimization across all the layers. The proposed cross-layer design should drive optical technologies and architectures in an innovative way, in order to fulfill the void between the design of basic photonic devices and the networking protocols that use them. The performance of the entire network -- from the optical components, to the routing algorithms and user applications -- should be optimized in concert. This contribution to the area of cross-layer network design creates an adaptable optical pipe that is extremely flexible and intelligent aware of both the physical optical signals and higher-layer requirements. The impact of this work will be seen in the realization of dynamic, energy-efficient optical communication links in future networking infrastructures

Silicon Photonics for All-Optical Processing and High-Bandwidth-Density Interconnects

Silicon photonics has emerged in recent years as one of the leading technologies poised to enable penetration of optical communications deeper and more intimately into computing systems than ever before. The integration potential of power efficient WDM links at the first level package or even deeper has been a strong driver for the rapid development this field has seen in recent years. The integration of photonic communication modules with very high bandwidth densities and virtually no bandwidth-distance limitations at the short reach regime of high performance computers and data centers has the potential to alleviate many of the bandwidth bottlenecks currently faced by board, rack, and facility levels. While networks on chip for chip multiprocessors (CMP) were initially deemed the target application of silicon photonic components, it has become evident in recent years that the initial lower hanging fruit is the CMP's I/O links to memory as well as other CMPs. The first chapter of the thesis provides more detailed motivation for the integration of silicon photonic modules into compute systems and surveys some of the recent developments in the field. The second chapter then proceeds to detail a technical case study of silicon photonic microring-based WDM links' scalability and power efficiency for these chip I/O applications which could be developed in the intermediate future. The analysis, initiated originally for a workshop on optical and electrical board and rack level interconnects, looks into a detailed model of the optical power budget for such a link capturing both single-channel aspects as well as WDM-operation-related considerations which are unique for a microring physical characteristics. The holistic analysis for the full link captures the wavelength-channel-spacing dependent characteristics, provides some methodologies for device design in the WDM-operation context, and provides performance predictions based on current best-of-class silicon photonic devices. The key results of the analysis are the determination of upper bounds on the aggregate achievable communication bandwidth per link, identifying design trade-offs for bandwidth versus power efficiency, and highlighting the need for continued technological improvements in both laser as well as photodetector technologies to allow acceptable power efficiency operation of such systems.The third chapter, while continuing on the theme silicon photonic high bandwidth density links, proceeds to detail the first experimental demonstration and characterization of an on-chip spatial division multiplexing (SDM) scheme based on microrings for the multiplexing and demultiplexing functionalities. In the context of more forward looking optical network-on-chip environments, SDM-enabled WDM photonic interconnects can potentially achieve superior bandwidth densities per waveguide compared to WDM-only photonic interconnects. The microring-based implementation allows dynamic tuning of the multiplexing and demultiplexing characteristic of the system which allows operation on WDM grid as well device tuning to combat intra-channel crosstalk. The characterization focuses on the first reported power penalty measurements for on-chip silicon photonic SDM link showing minimal penalties achievable with 3 spatial modes concurrently operating on a single waveguide with 10-Gb/s data carried by each mode. The chapter also details the first demonstration of WDM combined with SDM operation with six separate wavelength-and-spatial 10-Gb/s channels with error free operation and low power penalties. The fourth, fifth, and sixth chapters shift in topic from the application of silicon photonics to communication links to the evolving use of silicon waveguides for nonlinear all-optical processing. The unique tight mode confinement in sub-micron cross-sections combined with the high response of silicon have motivated the development of four-wave mixing (FWM)-based processing silicon devices. The key feature of the silicon platform for these nonlinear processing platforms is the ability to finely and uniformly control the dispersive properties of the optical structures in a way that enables completely offsetting the material dispersion and achieve dispersion profiles required for effective parametric interaction of waves in the optical structures. Chapter four primarily introduces and motivates nonlinear processing in communication applications and focuses on recent achievements in non-silicon and silicon FWM platforms. Chapter five describes some of the author's contributions on parametric processing of high speed data in silicon nonlinear devices, with first of a kind demonstrations of wavelength conversion of 160-Gb/s optically time division multiplexed (OTDM) data as well as the wavelength-multicasting of a 320-Gb/s OTDM stream. The chapter then details a methodical characterization and demonstration of several record wavelength conversion experiments of data in silicon with 40-Gb/s data wavelength-converted across more than 100 nm with only 1.4-dB of power penalties as well as the wavelength and format conversion of 10-Gb/s data across up to 168 nm with sensitivity gains stemming from the format conversion of about 2 dB and a residual conversion penalty of only 0.1 dB, achieved by implementing an improved experimental setup. Both experiments highlight the performance uniformity of the conversion process for a wide range of probe-idler detuning settings, showcasing the silicon platform's unique broadband phase matching properties. The sixth chapter presents a slight shift in motivation for parametric processing from traditional telecom-wavelength applications to functionalities developed targeting mid-IR operation. Parametric-processing in the silicon platform at long wavelengths holds large potential for performance improvements due to the elimination of two-photon absorption in silicon at long wavelengths as well as silicon's dispersion engineering capabilities which uniquely position the silicon platform for effective phase matching of significantly wavelength detuned waves. Four-wave mixing signal generation and reception at mid-IR wavelengths are attractive candidates for tunable flexible operation with modulation and detection speeds which are currently only available at telecom wavelengths. With this vision in mind, several contributions detailing extension of FWM functionalities in silicon to operate at wavelengths close to 2 μm with performance equivalent to much smaller detuning setting measurements. The contributions detail the experimental demonstration of the first silicon optical processing functionalities achieved at such long wavelengths including the wavelength conversion and unicast of 10-Gb/s signals with up to 700 nm of probe-idler detuning, the combined two-stage 10-Gb/s FWM-link in which both data generation and detection at 1900 nm is facilitated by parametric processing in silicon with only 2.1-dB overall penalty, the first ever 40-Gb/s receiver at 1900 nm based on a FWM stage for simultaneous temporal demultiplexing and wavelength conversion, and lastly, the demonstration of a 40-Gb/s FWM-link operation with only 3.6 dB of penalty. The chapter concludes with a short discussion on possible extensions to enable silicon parametric processing at even longer wavelengths targeting the mid-IR spectral transmission window of 3-5 μm

Ontwerp en evaluatie van content distributie netwerken voor multimediale streaming diensten.

Traditionele Internetgebaseerde diensten voor het verspreiden van bestanden, zoals Web browsen en het versturen van e-mails, worden aangeboden via één centrale server. Meer recente netwerkdiensten zoals interactieve digitale televisie of video-op-aanvraag vereisen echter hoge kwaliteitsgaranties (QoS), zoals een lage en constante netwerkvertraging, en verbruiken een aanzienlijke hoeveelheid bandbreedte op het netwerk. Architecturen met één centrale server kunnen deze garanties moeilijk bieden en voldoen daarom niet meer aan de hoge eisen van de volgende generatie multimediatoepassingen. In dit onderzoek worden daarom nieuwe netwerkarchitecturen bestudeerd, die een dergelijke dienstkwaliteit kunnen ondersteunen. Zowel peer-to-peer mechanismes, zoals bij het uitwisselen van muziekbestanden tussen eindgebruikers, als servergebaseerde oplossingen, zoals gedistribueerde caches en content distributie netwerken (CDN's), komen aan bod. Afhankelijk van de bestudeerde dienst en de gebruikte netwerktechnologieën en -architectuur, worden gecentraliseerde algoritmen voor netwerkontwerp voorgesteld. Deze algoritmen optimaliseren de plaatsing van de servers of netwerkcaches en bepalen de nodige capaciteit van de servers en netwerklinks. De dynamische plaatsing van de aangeboden bestanden in de verschillende netwerkelementen wordt aangepast aan de heersende staat van het netwerk en aan de variërende aanvraagpatronen van de eindgebruikers. Serverselectie, herroutering van aanvragen en het verspreiden van de belasting over het hele netwerk komen hierbij ook aan bod

AnyTraffic routing algorithm for label-based forwarding

The high capacity provided by packet-switched networks is supporting the proliferation of bandwidth intensive multimedia applications which require multicasting capability. As a consequence on today’s networks, unicast and multicast traffic compete for shared resources where a router must maintain both unicast and multicast forwarding states. Pursuing a forwarding state reduction, in this paper we introduce the novel concept of AnyTraffic data group which consists of a group of nodes receiving both unicast and multicast traffic over the same single minimum-cost network entity. A novel heuristic algorithm is specifically defined to accommodate such data group and has been compared with the standard shortest path (SP) algorithm - the optimal case for unicast routing - and a classical Steiner tree (ST) heuristic algorithm - the optimal case for multicast routing. Exhaustive experiments have been performed to validate the proposed algorithm.Postprint (published version

IP multicast over WDM networks

Ph.DDOCTOR OF PHILOSOPH

Multicast protection and energy efficient traffic grooming in optical wavelength routing networks.

Zhang, Shuqiang.Thesis (M.Phil.)--Chinese University of Hong Kong, 2010.Includes bibliographical references (p. 74-80).Abstracts in English and Chinese.Abstract --- p.i摘要 --- p.ivAcknowledgements --- p.vTable of Contents --- p.viChapter Chapter 1 --- Background --- p.1Chapter 1.1 --- Routing and Wavelength Assignment --- p.1Chapter 1.2 --- Survivability in Optical Networks --- p.3Chapter 1.3 --- Optical Multicasting --- p.4Chapter 1.3.1 --- Routing and Wavelength Assignment of Optical Multicast --- p.5Chapter 1.3.2 --- Current Research Topics about Optical Multicast --- p.8Chapter 1.4 --- Traffic Grooming --- p.10Chapter 1.4.1 --- Static Traffic Grooming --- p.11Chapter 1.4.2 --- Dynamic Traffic Grooming --- p.13Chapter 1.5 --- Contributions --- p.15Chapter 1.5.1 --- Multicast Protection with Scheduled Traffic Model --- p.15Chapter 1.5.2 --- Energy Efficient Time-Aware Traffic Grooming --- p.16Chapter 1.6 --- Organization of Thesis --- p.18Chapter Chapter 2 --- Multicast Protection in WDM Optical Network with Scheduled Traffic --- p.19Chapter 2.1 --- Introduction --- p.19Chapter 2.2 --- Multicast Protection under FSTM --- p.22Chapter 2.3 --- Illustrative Examples --- p.28Chapter 2.4 --- Two-Step Optimization under SSTM --- p.37Chapter 2.5 --- Summary --- p.40Chapter Chapter 3 --- Energy Efficient Time-Aware Traffic Grooming in Wavelength Routing Networks --- p.41Chapter 3.1 --- Introduction --- p.41Chapter 3.2 --- Energy consumption model --- p.43Chapter 3.3 --- Static Traffic Grooming with Time awareness --- p.44Chapter 3.3.1 --- Scheduled Traffic Model for Traffic Grooming --- p.44Chapter 3.3.2 --- ILP Formulation --- p.44Chapter 3.3.3 --- Illustrative Numerical Example --- p.48Chapter 3.4 --- Dynamic Traffic Grooming with Time Awareness --- p.49Chapter 3.4.1 --- Time-Aware Traffic Grooming (TATG) --- p.51Chapter 3.5 --- Simulation Results of Dynamic Traffic Grooming --- p.54Chapter 3.5.1 --- 24-node USNET: --- p.55Chapter 3.5.2 --- 15-node Pacific Bell Network: --- p.59Chapter 3.5.3 --- 14-node NSFNET: --- p.63Chapter 3.5.4 --- Alternative Configuration of Simulation Parameters: --- p.67Chapter 3.6 --- Summary --- p.71Chapter Chapter 4 --- Conclusions and Future Work --- p.72Chapter 4.1 --- Conclusions --- p.72Chapter 4.2 --- Future Work --- p.73Bibliography --- p.74Publications during M.Phil Study --- p.8