Digitally-Assisted RF-Analog Self Interference Cancellation for Wideband Full-Duplex Radios

The ever-increasing demand for more data from users is pushing the development of alternative wireless technologies to improve upon network capacity. Full-Duplex radios provide an exciting opportunity to theoretically double the available spectral efficiency of wireless networks by simultaneously transmitting and receiving signals in the same frequency band. The main challenge that is presented in the implementation of a full-duplex radio is the high power transmitter leaking to the sensitive receiver chain and masking the desired receive signal to be decoded. This transmitter leakage is referred to as self interference and it is required that this self interference signal be cancelled below the receiver noise floor to achieve the full benefits of a full-duplex radio. Cancellation of the self interference signal is realized through several techniques, categorized as passive suppression, digital cancellation, and analog cancellation. These methods all have their challenges in achieving the full amount of cancellation necessary and therefore all three techniques are typically employed in the system. In this thesis, a novel digitally assisted radio frequency (RF) analog self interference canceller is proposed to suppress the self interference signal before the receiver chain for wide modulation bandwidth signals. This canceller augments minimum complexity RF-analog interference cancellation hardware that uses an RF vector multiplier in combination with a flexible digital rational function finite impulse response filter. The simple topology reduces the number of impairments added to the system through the analog components and identifies the parameters of the proposed filter in a deterministic and single iteration algorithm. The hardware proof-of-concept prototype is built using off-the-shelf RF-analog components and demonstrates excellent cancellation performance. Using four TX test signals with modulation bandwidths of 20~MHz, 40~MHz, 80~MHz, and 120~MHz, the self interference canceller achieves a minimum of 50~dB, 47~dB, 42~dB, and 40~dB of cancellation respectively. This thesis reviews the previously proposed self interference cancellation topologies, system non-idealities that provide challenges for full-duplex implementation, and the realization of the proposed RF-analog self interference canceller

Reconfigurable Bulk Acoustic Wave Resonators and Filters Employing Electric-field-induced Piezoelectricity and Negative Piezoelectricity for 5G

The ever-expanding wireless communications and sensing are influencing every aspect of human life. With the persistent demand for higher data capacity and recent advancements in wireless technologies, the design of current radio frequency front-end circuitry in communication devices calls for transformative changes. Frequency band proliferation is the biggest contributor to the added RF front-ends complexity in the design of future radios. To operate at various frequency bands, a complex combination of switches and filters is used in mobile devices, and the number of these frequency selective components in each device is expected to exceed 100 with the advent of 5th generation (5G) communication networks. Acoustic wave filters based on piezoelectric materials are the primary technologies employed in current communication systems, including mobile phones. Alternatively, the integration of multifunctional ferroelectric materials into reconfigurable frequency selective components promises reduced complexity, diminished size, and high performance for future radios, enabling them to support 5G wireless technologies and beyond. A promising reconfigurable bulk acoustic wave technology, employing electric-field-induced piezoelectricity and negative piezoelectricity in ferroelectrics, is presented in this dissertation. Successful implementation of ferroelectric filters would eliminate the need for external switcheplexers in the RF front-ends and reduce the number of required filters, leading to a significant reduction in size, cost, and complexity. Contributions of this work are categorized into three major parts. In the first part, an intrinsically switchable thin film bulk acoustic wave resonator (FBAR) based on ferroelectric BST with the highest figure of merit (i.e., Q_m×K_t^2) in the literature is presented. The BST FBARs are then employed to design intrinsically switchable filters with the lowest insertion loss to date. Such filters combine filtering and switching functionalities onto a single device, eliminating the need for external switches in RF front-ends. The second part of this work focuses on the development of frequency and bandwidth reconfigurable filters based on BST FBARs. The first switchless acoustic wave filter bank is presented in chapter 3, demonstrating the capability of BST FBARs in simplifying future agile radios. Next, a novel bandwidth reconfigurable filter based on BST FBARs is introduced in chapter 4, where the idea is experimentally validated with multiple design examples. Finally, through rigorous mathematical analysis and experimental validation, it has been demonstrated that a dynamic ‘non-uniform piezoelectric coefficient’ created within a composite structure made up of multi-layers of ferroelectrics allows the selective excitation of different mechanical Eigenmodes with a constant electromechanical coupling coefficient. Such technology overcomes the fundamental limitations associated with the electromechanical coupling coefficient of harmonic resonances in bulk acoustic wave resonators. To create ‘non-uniform piezoelectric coefficients’ in such structures, ferroelectrics’ electric-field-induced piezoelectricity and negative piezoelectricity has been exploited. This innovative technology provides a fundamentally new approach and a framework for synthesizing programmable frequency selective components, which leads to transformative advances in wireless systems’ front-end architecture. As part of the future direction, it is suggested that the multilayer structure presented in this section to be further studies as part of a new acoustic wave resonator design, which: (a) is capable of operation at a wide frequency range up to mm-wave frequencies designated for 5G (b). Such a structure has the potential to overcome the fundamental limitation of acoustic resonator’s ever-decreasing electromechanical coupling factors (Kt2) as their frequency of operation increases.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/163011/1/milad_1.pd

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Cooperative Radio Communications for Green Smart Environments

The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

Evaluation of Alternative Telecommunication Technologies for the Karoo Central Astronomy Advantage Area

Cite: Academy of Science of South Africa (ASSAf), (2021). Evaluation of Alternative Telecommunication Technologies for the Karoo Central Astronomy Advantage Area. [Online] Available at: DOI http://dx.doi.org/10.17159/assaf.2021/0073The National Research Foundation (NRF) requested the Academy of Science of South Africa (ASSAf), on behalf of South African Radio Astronomy Observatory (SARAO) and the Square Kilometre Array (SKA), to undertake an independent and objective evaluation of potential alternative telecommunication technologies for the areas of the Karoo Central Astronomy Advantage Areas (KCAAA). The study encompasses regulatory, public sphere, and technical dimensions to explore options for maintaining the functionality of the telescope while, at the same time, delivering appropriate connectivity solutions for local communities.The objectives of this study are as follows:1) Assess the technologies currently being, or planning to be, deployed through existing alternative communications programs managed by SARAO, including whether these technologies are comparable with market available technologies that could feasibly be deployed in the KCAAA; and2) Assessment of current and future telecommunication technologies that may act as suitable replacement and/or improvement (functional and feasible) for existing detrimental technologies, utilised in the KCAAA.This report provides a critical background into the relationship between the SKA and local communities as it relates to ICTs in the area. Based on this understanding, potential technology solutions are proposed to ensure residents of the KCAAA are still afforded valuable access to information and communication technologies (ICTs) within the parameters of affordability, desirability and feasibility.National Research Foundation (NRF

Enhancing the energy efficiency of radio base stations

This thesis is concerned with the energy efficiency of cellular networks. It studies the dominant power consumer in future cellular networks, the Long Term Evolution (LTE) radio Base Station (BS), and proposes mechanisms that enhance the BS energy efficiency by reducing its power consumption under target rate constraints. These mechanisms trade spare capacity for power saving. First, the thesis describes how much power individual components of a BS consume and what parameters affect this consumption based on third party experimental data. These individual models are joined into a component power model for an entire BS. The component model is an essential step in analysis but is too complex for many applications. It is therefore abstracted into a much simpler parameterized model to reduce its complexity. The parameterized model is further simplified into an affine model which can be applied in power minimization. Second, Power Control (PC) and Discontinuous Transmission (DTX) are identified as promising power-saving Radio Resource Management (RRM) mechanisms and applied to multi-user downlink transmission. PC reduces the power consumption of the Power Amplifier (PA) and is found to be most effective at high traffic loads. DTX mostly reduces the power consumption of the Baseband (BB) unit while interrupting transmission and is better applied in low traffic loads. Joint optimization of these two techniques is found to enable additional power-saving at medium traffic loads and to be a convex problem which can be solved efficiently. The convex problem is extended to provide a comprehensive power-saving Orthogonal Frequency Division Multiple Access (OFDMA) frame resource scheduler. The proposed scheduler is shown to reduce power consumption by 25-40% in computer simulations, depending on the traffic load. Finally, the thesis investigates the influence of interference on power consumption in a network of multiple power-saving BSs. It discusses three popular alternative distributed uncoordinated methods which align DTX mode between neighbouring BSs. To address drawbacks of these three, a fourth memory-based DTX alignment method is proposed. It decreases power consumption by up to 40% and retransmission probability by around 20%, depending on the traffic load

Energy E fficiency Oriented Full Duplex Wireless Communication Systems

Full-duplex (FD) transmission is a promising technique for fifth generation (5G) wireless communications, enabling significant spectral efficiency (SE) improvement over existing half-duplex (HD) systems. However, FD transmission consumes higher power than HD transmission, especially for millimetre wave band. Therefore, energy efficiency (EE) for FD systems is a critical yet inadequately addressed issue. This thesis addresses the critical EE challenges and demonstrates promising solutions for implementing FD systems, as detailed in the following contributions. In the first contribution, a comprehensive EE analysis of the FD and HD amplify-and-forward (AF) relay-assisted 60 GHz dual-hop indoor wireless systems is presented. An opportunistic relay mode selection scheme is developed, where FD relay with different self-interference (SIC) techniques or HD relay is opportunistically selected. Together with transmission power adaptation, EE is maximised with given channel gains. A counter-intuitive finding is shown that, with a relatively loose maximum transmission power constraint, FD relay with two-stage SIC is preferable to both FD relay with one-stage SIC and HD relay, resulting in a higher optimised EE. A full range of power consumption sources are considered to rationalise the analysis. The effects of imperfect SIC at relay, drain efficiency and static circuit power on EE are investigated. Simulation results verify the theoretical analysis. In the second contribution, EE oriented resource allocation for FD decode-of-forward (DF) relay-assisted 60 GHz multiuser systems is investigated. In contrast to the existing SE oriented designs, the proposed scheme maximises EE for FD relay systems under cross-layer constraints, addressing the typical problems at 60 GHz. A low-complexity EE-orientated resource allocation algorithm is proposed, by which the transmission power allocation, subcarrier allocation and throughput assignment are performed jointly across multiple users. Simulation results verify the analytical results and confirm that the FD relay systems with the proposed algorithm achieve a higher EE than the FD relay systems with SE oriented approaches, while offering a comparable SE. In addition, a much lower throughput outage probability is guaranteed by the proposed resource allocation algorithm, showing its robustness against channel estimation errors. In the third contribution, it is noticed that in wireless power transfer (WPT)-aided relay systems, the SE of the source-relay link plays a dominant role in the system SE due to limited transmission power at the WPT-aided relay. A novel asymmetric protocol for WPT-aided FD DF relay systems is proposed in multiuser scenario, where the time slot durations of the two hops are designed to be uneven, to enhance the degree of freedom and hence the system SE. A corresponding dynamic resource allocation algorithm is developed by jointly optimising the time slot durations, subcarriers and transmission power at the source and the relay. Simulation results con rm that, compared to the symmetric WPT-aided FD relay (Sym-WPT-FR) and the time-switching based WPT-aided FD relay (TS-WPT-FR) systems in the literature, the proposed asymmetric WPT-aided FD relay system achieves up to twice the SE and higher robustness against the relay's location and the number of users. In the final contribution, to strike the balance between high SE and low power consumption, a hybrid duplexing strategy is developed for distributed antennas (DAs) systems, where antennas are capable of working in hybrid FD, HD, and sleeping modes. To maximise the system EE with low complexity, activation/deactivation of transmit/receive chain is first performed, by a proposed channel-gain-based DA clustering algorithm, which highlights the characteristics of distributed deployment of antennas. Based on the DAs' con figuration, a novel distributed hybrid duplexing (D-HD)-based and EE oriented algorithm is proposed to further optimise the downlink beamformer and the uplink transmission power. To rationalise the system model, self-interference at DAs, co-channel interference from uplink users to downlink users, and multiuser interference in both uplink and downlink are taken into account. Simulation results confirm that the proposed system provides significant EE and SE enhancements over the colocated FD MIMO system, showing the advantages in alleviating high path loss as well as in cutting the carbon footprint. Compared to the sole-FD DA system, the proposed system shows much higher EE with marginal loss in SE. Also, the SIC operation in the proposed system is much more simplified compared to the two benchmarks