Dual-Band Ten-Element MIMO Array Based on Dual-Mode IFAs for 5G Terminal Applications

A dual-band ten-element MIMO array based on dual-mode inverted-F antennas (IFAs) for 5G terminal applications is presented in this paper. The proposed dual-mode IFA is composed of two radiators, which are etched on the outer and inner surfaces of the side-edge frame. The outer part of the antenna generates the low-order mode at 3.5 GHz, while the inner part radiates another one-quarter-wavelength mode at 4.9 GHz. In this way, the IFA can achieve dual-band operation within a compact size of 10.6 × 5.3 × 0.8 mm 3 . Based on the proposed antenna, a dual-band ten-element multiple-input and multiple-output (MIMO) array is developed for 5G terminal applications. By combining neutralization line structures with decoupling branches, the isolations between the elements are improved. To validate the design concept, a prototype of the ten-element MIMO array is designed, fabricated, and measured. The experimental results show that the proposed antenna can cover the 3.3-3.6 GHz and 4.8-5.0 GHz bands with good isolation and high efficiency. Furthermore, the envelope correlation coefficient (ECC), and channel capacity are also calculated to verify the MIMO performances for 5G sub-6GHz applications

An innovative fractal monopole MIMO antenna for modern 5G applications

Proposed in this paper is the design of an innovative and compact antenna array which based on four radiating elements for multi-input multi-output (MIMO) antenna applications used in 5G communication systems. The radiating elements are fractal curves excited using an open-circuited feedline through a coplanar waveguide (CPW). The feedline is electromagnetically coupled to the inside edge of the radiating element. The array's impedance bandwidth is enhanced by inserting a ground structure composed of low-high-low impedance between the radiating elements. The low-impedance section of the ground is a staircase structure that is inclined at an angle to follow the input feedline. This inter-radiating element essentially suppresses near-field radiation between adjacent radiators. A band reject filter based on a composite right/left hand (CRLH) structure is mounted at the back side of the antenna array to reduce mutual coupling between the antenna elements by choking surface wave propagations that can otherwise degrade the radiation performance of the array antenna. The CRLH structure is based on the Hilbert fractal geometry, and it was designed to act like a stop band filter over the desired frequency bands. The proposed antenna array was fabricated and tested. It covers the frequency bands in the range from 2 to 3 GHz, 3.4-3.9 GHz, and 4.4-5.2 GHz. The array has a maximum gain of 6. 2dBi at 3.8 GHz and coupling isolation better than 20 dB. The envelope correlation coefficient of the antenna array is within the acceptable limit. There is good agreement between the simulated and measured results.Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. Funding for APC: Universidad Carlos III de Madrid (Read & Publish Agreement CRUE-CSIC 2022)

Wideband Back-Cover Antenna Design Using Dual Characteristic Modes With High Isolation for 5G MIMO Smartphone

© 2022 IEEE - All rights reserved. This is the accepted manuscript version of an article which has been published in final form at https://doi.org/10.1109/TAP.2022.3145456A novel method of designing a wideband high isolated dual-antenna pair using dual characteristic modes (CMs)is presented for fifth-generation (5G) multiple-input multiple output (MIMO) smartphone applications. A set of orthogonal CMs resonating from the square-loop slot is first introduced and works for the lower band. Then, another set of orthogonal CMs resonating from the edge branches is introduced with a shared compact radiator and works for the higher band. In combination with two sets of degenerated CMs and a capacitive coupling feeding structure, the proposed dual-antenna pair achieves abroad impedance bandwidth and high isolation without the need for any external decoupling structures. Based on this dual-antenna pair, an 8×8 MIMO array is developed and integrated into the back cover of a smartphone, which realizes zero ground clearance on the system circuit board. To verify the design concept, prototypes of the antenna pair and MIMO array were fabricated and measured. It shows that experimental results agree well with the simulation results. More importantly, the presented 8×8 MIMO array has high isolation of more than 20 dBis achieved across the operating band of 3.3-3.8 GHz.Peer reviewedFinal Accepted Versio

An innovative fractal monopole MIMO antenna for modern 5G applications

Proposed in this paper is the design of an innovative and compact antenna array which based on four radiating elements for multi-input multi-output (MIMO) antenna applications used in 5G communication systems. The radiating elements are fractal curves excited using an open-circuited feedline through a coplanar waveguide (CPW). The feedline is electromagnetically coupled to the inside edge of the radiating element. The array’s impedance bandwidth is enhanced by inserting a ground structure composed of low–high-low impedance between the radiating elements. The low-impedance section of the ground is a staircase structure that is inclined at an angle to follow the input feedline. This inter-radiating element essentially suppresses near-field radiation between adjacent radiators. A band reject filter based on a composite right/left hand (CRLH) structure is mounted at the back side of the antenna array to reduce mutual coupling between the antenna elements by choking surface wave propagations that can otherwise degrade the radiation performance of the array antenna. The CRLH structure is based on the Hilbert fractal geometry, and it was designed to act like a stop band filter over the desired frequency bands. The proposed antenna array was fabricated and tested. It covers the frequency bands in the range from 2 to 3 GHz, 3.4–3.9 GHz, and 4.4–5.2 GHz. The array has a maximum gain of 6.2dBi at 3.8 GHz and coupling isolation better than -20 dB. The envelope correlation coefficient of the antenna array is within the acceptable limit. There is good agreement between the simulated and measured results