56 research outputs found

    Interference Suppression in WCDMA with Adaptive Thresholding based Decision Feedback Equaliser

    Get PDF
    WCDMA is considered as one of the 3G wireless standards by 3GPP. Capacity calculation shows that WCDMA systems have more capacity compared to any other multiple access technique such as time division multiple access (TDMA) or frequency division multiple access (FDMA). So it is widely used. Rake receivers are used for the detection of transmitted data in case of WCDMA communication systems due to its resistance to multipath fading. But rake receiver treat multiuser interference (MUI) as AWGN and have limitation in overcoming the effect of multiple access interference (MAI) when the SNR is high. A de-correlating matched filter has been used in this thesis, which eliminates and improves system performance. But the given receiver works well only in the noise free environment. A DFE, compared to linear equaliser, gives better performance at severe ISI condition. The only problem in this equalisation technique is to select the number of symbols that are to be fed back. This thesis gives an idea on multiple symbol selection, based on sparity where an adaptive thresholding algorithm is used that computes the number of symbols to feedback. Simulated results show a significant performance improvement for Regularised Rake receiver along with thresholding in terms of BER compared to a rake receiver, de-correlating rake receiver and regularised rake receiver. The performance of the receiver in different channels is also analysed

    Receiver algorithms that enable multi-mode baseband terminals

    Get PDF

    Dynamic length equaliser and its application to the DS-CDMA systems

    Get PDF

    Performance of Multi-Antenna Enhanced HSDPA

    Get PDF

    Transmitter based techniques for ISI and MAI mitigation in CDMA-TDD downlink

    Get PDF
    The third-generation (3G) of mobile communications systems aim to provide enhanced voice, text and data services to the user. These demands give rise to the complexity and power consumption of the user equipment (UE) while the objective is smaller, lighter and power efficient mobiles. This thesis aims to examine ways of reducing the UE receiver’s computational cost while maintaining a good performance. One prominent multiple access scheme selected for 3G is code division multiple access. Receiver based multiuser detection techniques that utilise the knowledge of the downlink channel by the mobile have been extensively studied in the literature, in order to deal with multiple access and intersymbol interference. However, these techniques result in high mobile receiver complexity. Recently, work has been done on algorithms that transfer the complexity from the UE to the base station by exploiting the fact that in time division duplex mode the downlink channel can be known to the transmitter. By linear precoding of the transmitted signal the user equipment can be simplified to a filter matched to the user’s spreading code. In this thesis the problem of generic linear precoding is analysed theoretically and a method for analytical calculation of BER is developed. The most representative of the developed precoding techniques are described under a common framework, compared and classified as bitwise or blockwise. Bitwise demonstrate particular advantages in terms of complexity and implementation but lack in performance. Two novel bitwise algorithms are presented and analysed. They outperform significantly the existing ones, while maintain a reduced computational cost and realisation simplicity. The first, named inverse filters, is the Wiener solution of the problem after applying a minimum mean squared error criterion with power constraints. The second recruits multichannel adaptive algorithms to achieve the same goal. The base station emulates the actual system in a cell to converge iteratively to the pre-filters that precode the transmitted signals before transmission. The advantages and the performance of the proposed techniques, along with a variety of characteristics are demonstrated by means of Monte Carlo simulations

    Multicarrier CDMA systems with MIMO technology

    Get PDF
    The rapid demand for broadband wireless access with fast multimedia services initiated a vast research on the development of new wireless systems that will provide high spectral efficiencies and data rates. A potential candidate for future generation wireless systems is multi-carrier code division multiple access (MC-CDMA). To achieve higher user capacities and increase the system data rate, various multiple-input multiple-output (MIMO) technologies such as spatial multiplexing and spatial diversity techniques have been proposed recently and combined with MC-CDMA.This research proposes a chip level coded ordered successive spatial and multiuser interference cancellation (OSSMIC) receiver for downlink MIMO MC-CDMA systems. As the conventional chip level OSIC receiver [1] is unable to overcome multiple access interference (MAI) and performs poorly in multiuser scenarios, the proposed receiver cancels both spatial and multiuser interference by requiring only the knowledge of the desired user's spreading sequence. Simulation results show that the proposed receiver not only performs better than the existing linear detectors [2] but also outperforms both the chip and symbol level OSIC receivers. In this work we also compare the error rate performance between our proposed system and MIMO orthogonal frequency division multiple access (MIMO OFDMA) system and we justify the comparisons with a pairwise error probability (PEP) analysis. MIMO MC-CDMA demonstrates a better performance over MIMO OFDMA under low system loads whereas in high system loads, MIMO OFDMA outperforms MIMO MC-CDMA. However if all users' spreading sequences are used at the desired user receiver, MIMO MC-CDMA performs better than MIMO OFDMA at all system loads.In the second part of this work, user grouping algorithms are proposed to provide power minimisation in grouped MC-CDMA and space-time block code (STBC) MC-CDMA systems. When the allocation is performed without a fair data rate requirement, the optimal solution to the minimisation problem is provided. However when some fairness is considered, the optimal solution requires high computational complexity and hence we solve this problem by proposing two suboptimal algorithms. Simulation results illustrate a significantly reduced power consumption in comparison with other techniques.EThOS - Electronic Theses Online ServiceEPSRCGBUnited Kingdo
    corecore