1,623 research outputs found
Design guidelines for spatial modulation
A new class of low-complexity, yet energyefficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO) has emerged. These systems are capable of exploiting the spatial dimensions (i.e. the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication whilst relying on a single-Radio Frequency (RF) chain. Moreover, SM may also be viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/ cooperative protocol design issues, and on their meritorious variants
Adaptive OFDM Index Modulation for Two-Hop Relay-Assisted Networks
In this paper, we propose an adaptive orthogonal frequency-division
multiplexing (OFDM) index modulation (IM) scheme for two-hop relay networks. In
contrast to the traditional OFDM IM scheme with a deterministic and fixed
mapping scheme, in this proposed adaptive OFDM IM scheme, the mapping schemes
between a bit stream and indices of active subcarriers for the first and second
hops are adaptively selected by a certain criterion. As a result, the active
subcarriers for the same bit stream in the first and second hops can be varied
in order to combat slow frequency-selective fading. In this way, the system
reliability can be enhanced. Additionally, considering the fact that a relay
device is normally a simple node, which may not always be able to perform
mapping scheme selection due to limited processing capability, we also propose
an alternative adaptive methodology in which the mapping scheme selection is
only performed at the source and the relay will simply utilize the selected
mapping scheme without changing it. The analyses of average outage probability,
network capacity and symbol error rate (SER) are given in closed form for
decode-and-forward (DF) relaying networks and are substantiated by numerical
results generated by Monte Carlo simulations.Comment: 30 page
Space-Time Trellis and Space-Time Block Coding Versus Adaptive Modulation and Coding Aided OFDM for Wideband Channels
Abstract—The achievable performance of channel coded spacetime trellis (STT) codes and space-time block (STB) codes transmitted over wideband channels is studied in the context of schemes having an effective throughput of 2 bits/symbol (BPS) and 3 BPS. At high implementational complexities, the best performance was typically provided by Alamouti’s unity-rate G2 code in both the 2-BPS and 3-BPS scenarios. However, if a low complexity implementation is sought, the 3-BPS 8PSK space-time trellis code outperfoms the G2 code. The G2 space-time block code is also combined with symbol-by-symbol adaptive orthogonal frequency division multiplex (AOFDM) modems and turbo convolutional channel codecs for enhancing the system’s performance. It was concluded that upon exploiting the diversity effect of the G2 space-time block code, the channel-induced fading effects are mitigated, and therefore, the benefits of adaptive modulation erode. In other words, once the time- and frequency-domain fades of the wideband channel have been counteracted by the diversity-aided G2 code, the benefits of adaptive modulation erode, and hence, it is sufficient to employ fixed-mode modems. Therefore, the low-complexity approach of mitigating the effects of fading can be viewed as employing a single-transmitter, single-receiver-based AOFDM modem. By contrast, it is sufficient to employ fixed-mode OFDM modems when the added complexity of a two-transmitter G2 scheme is affordable
Generalized dual-mode index modulation aided OFDM
Dual-mode index modulation aided orthogonal frequency division multiplexing (DM-OFDM) is recently proposed, where subcarriers are partitioned into OFDM subblocks, divided into two groups within each subblock, and modulated by two differentiable constellation alphabets. In DM-OFDM, additional bits can be transmitted through indices of subcarriers modulated by the same constellation alphabet. In this letter, generalized DM-OFDM (GDM-OFDM) is proposed, where the number of subcarriers modulated by the same constellation mode in each subblock is alterable. By applying such enhancement, the spectral efficiency can be improved at the cost of marginal performance loss. Moreover, since the BER performance of GDM-OFDM degrades at low signal-to-noise ratios (SNRs), an interleaving technique is employed to address this issue. At the receiver, a maximum-likelihood (ML) detector and a reduced-complexity log-likelihood ratio (LLR) detector are employed for demodulation. Simulation results demonstrate that the proposed GDMOFDM is capable of enhancing the spectral efficiency compared with DM-OFDM at the cost of negligible performance loss, and the interleaved GDM-OFDM (IGDM-OFDM) can harvest on performance gain over GDM-OFDM
Multidimensional Index Modulation for 5G and Beyond Wireless Networks
This study examines the flexible utilization of existing IM techniques in a
comprehensive manner to satisfy the challenging and diverse requirements of 5G
and beyond services. After spatial modulation (SM), which transmits information
bits through antenna indices, application of IM to orthogonal frequency
division multiplexing (OFDM) subcarriers has opened the door for the extension
of IM into different dimensions, such as radio frequency (RF) mirrors, time
slots, codes, and dispersion matrices. Recent studies have introduced the
concept of multidimensional IM by various combinations of one-dimensional IM
techniques to provide higher spectral efficiency (SE) and better bit error rate
(BER) performance at the expense of higher transmitter (Tx) and receiver (Rx)
complexity. Despite the ongoing research on the design of new IM techniques and
their implementation challenges, proper use of the available IM techniques to
address different requirements of 5G and beyond networks is an open research
area in the literature. For this reason, we first provide the dimensional-based
categorization of available IM domains and review the existing IM types
regarding this categorization. Then, we develop a framework that investigates
the efficient utilization of these techniques and establishes a link between
the IM schemes and 5G services, namely enhanced mobile broadband (eMBB),
massive machine-type communications (mMTC), and ultra-reliable low-latency
communication (URLLC). Additionally, this work defines key performance
indicators (KPIs) to quantify the advantages and disadvantages of IM techniques
in time, frequency, space, and code dimensions. Finally, future recommendations
are given regarding the design of flexible IM-based communication systems for
5G and beyond wireless networks.Comment: This work has been submitted to Proceedings of the IEEE for possible
publicatio
Index Modulation-Aided OFDM for Visible Light Communications
Index modulation-aided orthogonal frequency-division multiplexing(IM-OFDM) is a promising modulation technique to achieve high spectral and energy efficiency. In this chapter, the conventional optical OFDM schemes are firstly reviewed, followed by the principles of IM-OFDM. The application of IM-OFDM in visible light communication (VLC) systems is introduced, and its performance is compared with conventional optical OFDM, which verifies its superiority. Finally, the challenges and opportunities of IM-OFDM are discussed for the VLC applications
- …