An Adaptive Packet Aggregation Algorithm (AAM) for Wireless Networks

Packet aggregation algorithms are used to improve the throughput performance by combining a number of packets into a single transmission unit in order to reduce the overhead associated with each transmission within a packet-based communications network. However, the throughput improvement is also accompanied by a delay increase. The biggest drawback of a significant number of the proposed packet aggregation algorithms is that they tend to only optimize a single metric, i.e. either to maximize throughput or to minimize delay. They do not permit an optimal trade-off between maximizing throughput and minimizing delay. Therefore, these algorithms cannot achieve the optimal network performance for mixed traffic loads containing a number of different types of applications which may have very different network performance requirements. In this thesis an adaptive packet aggregation algorithm called the Adaptive Aggregation Mechanism (AAM) is proposed which achieves an aggregation trade-off in terms of realizing the largest average throughput with the smallest average delay compared to a number of other popular aggregation algorithms under saturation conditions in wireless networks. The AAM algorithm is the first packet aggregation algorithm that employs an adaptive selection window mechanism where the selection window size is adaptively adjusted in order to respond to the varying nature of both the packet size and packet rate. This algorithm is essentially a feedback control system incorporating a hybrid selection strategy for selecting the packets. Simulation results demonstrate that the proposed algorithm can (a) achieve a large number of sub-packets per aggregate packet for a given delay and (b) significantly improve the performance in terms of the aggregation trade-off for different traffic loads. Furthermore, the AAM algorithm is a robust algorithm as it can significantly improve the performance in terms of the average throughput in error-prone wireless networks

Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks

Algorithms and protocols for multi-channel wireless networks

A wireless channel is shared by all devices, in the vicinity, that are tuned to the channel, and at any given time, only one of the devices can transmit information. One way to overcome this limitation, in throughput capacity, is to use multiple orthogonal channels for different devices, that want to transmit information at the same time. In this work, we consider the use of multiple orthogonal channels in wireless data networks. We explore algorithms and protocols for such multi-channel wireless networks under two broad categories of network-wide and link-level challenges. Towards handling the network-wide issues, we consider the channel assignment and routing issues in multi-channel wireless networks. We study both single radio and multi-radio multi-channel networks. For single radio multi-channel networks, we propose a new granularity for channel assignment, that we refer to as component level channel assignment. The strategy is relatively simple, and is characterized by several impressive practical advantages. For multi-radio multi-channel networks, we propose a joint routing and channel assignment protocol, known as Lattice Routing. The protocol manages channels of the radios, for the different nodes in the network, using information about current channel conditions, and adapts itself to varying traffic patterns, in order to efficiently use the multiple channels. Through ns2 based simulations, we show how both the protocols outperform other existing protocols for multi-channel networks under different network environments. Towards handling the link-level challenges, we identify the practical challenges in achieving a high data-rate wireless link across two devices using multiple off-the-shelf wireless radios. Given that the IEEE 802.11 a/g standards define 3 orthogonal wi-fi channels in the 2.4GHz band and 12 orthogonal wi-fi channels in the 5GHz band, we answer the following question: ``can a pair of devices each equipped with 15 wi-fi radios use all the available orthogonal channels to achieve a high data-rate link operating at 600Mbps?' Surprisingly, we find through experimental evaluation that the actual observed performance when using all fifteen orthogonal channels between two devices is a mere 91Mbps. We identify the reasons behind the low performance and present Glia, a software only solution that effectively exercises all available radios. We prototype Glia and show using experimental evaluations that Glia helps achieve close to 600Mbps data-rate when using all possible wi-fi channels.PhDCommittee Chair: Sivakumar, Raghupathy; Committee Member: Blough, Doug; Committee Member: Coyle, Edward; Committee Member: Eidenbenz, Stephan; Committee Member: Fekri, Faramar

Improving the Performance of Wireless LANs

This book quantifies the key factors of WLAN performance and describes methods for improvement. It provides theoretical background and empirical results for the optimum planning and deployment of indoor WLAN systems, explaining the fundamentals while supplying guidelines for design, modeling, and performance evaluation. It discusses environmental effects on WLAN systems, protocol redesign for routing and MAC, and traffic distribution; examines emerging and future network technologies; and includes radio propagation and site measurements, simulations for various network design scenarios, numerous illustrations, practical examples, and learning aids

Experimenting with commodity 802.11 hardware: overview and future directions

The huge adoption of 802.11 technologies has triggered a vast amount of experimentally-driven research works. These works range from performance analysis to protocol enhancements, including the proposal of novel applications and services. Due to the affordability of the technology, this experimental research is typically based on commercial off-the-shelf (COTS) devices, and, given the rate at which 802.11 releases new standards (which are adopted into new, affordable devices), the field is likely to continue to produce results. In this paper, we review and categorise the most prevalent works carried out with 802.11 COTS devices over the past 15 years, to present a timely snapshot of the areas that have attracted the most attention so far, through a taxonomy that distinguishes between performance studies, enhancements, services, and methodology. In this way, we provide a quick overview of the results achieved by the research community that enables prospective authors to identify potential areas of new research, some of which are discussed after the presentation of the survey.This work has been partly supported by the European Community through the CROWD project (FP7-ICT-318115) and by the Madrid Regional Government through the TIGRE5-CM program (S2013/ICE-2919).Publicad

On the performance of QUIC over wireless mesh networks

The exponential growth in adoption of mobile phones and the widespread availability of wireless networks has caused a paradigm shift in the way we access the Internet. It has not only eased access to the Internet, but also increased users’ appetite for responsive services. New protocols to speed up Internet applications have naturally emerged. The QUIC transport protocol is one prominent case. Initially developed by Google as an experiment, the protocol has already made phenomenal strides, thanks to its support in Google’s servers and Chrome browser. Since QUIC is still a relatively new protocol, there is a lack of sufficient understanding about its behavior in real network scenarios, particularly in the case of wireless networks. In this paper we present a comprehensive study on the performance of QUIC in Wireless Mesh Networks (WMN). We perform a measurement campaign on a production WMN to compare the performance of QUIC against TCP when retrieving files from the Internet. Our results show that while QUIC outperforms TCP in wired networks, it exhibits significantly lower performance than TCP in the WMN. We investigate the reasons for this behavior and identify the root causes of the performance issues. We find that some design choices of QUIC may penalize the protocol in WiFi, e.g., uncovering sub-optimal interactions of QUIC with MAC layer features, such as frame aggregation. Finally, we implement and evaluate our solution and demonstrate up to 28% increase in throughput of QUIC.This work was supported by the Erasmus Mundus Joint Doctorate in Distributed Computing EMJD-DC program, the Spanish grant TIN2016-77836-C2-2-R, and Generalitat de Catalunya through 2017-SGR-990. This research was conducted as part of the PhD thesis which is available online at upcommons.upc.edu.Peer ReviewedPostprint (author's final draft