Silicon slow-light-based photonic mixer for microwave-frequencyconversion applications

This paper was published in OPTICS LETTERS and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://dx.doi.org/10.1364/OL.37.001721. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law[EN] We describe and demonstrate experimentally a method for photonic mixing of microwave signals by using a silicon electro-optical Mach¿Zehnder modulator enhanced via slow-light propagation. Slow light with a group index of ~11, achieved in a one-dimensional periodic structure, is exploited to improve the upconversion performance of an input frequency signal from 1 to 10.25 GHz. A minimum transmission point is used to successfully demonstrate the upconversion with very low conversion losses of ~7¿¿dB and excellent quality of the received I/Q modulated QPSK signal with an optimum EVM of ~8%.Financial support from FP7-224312 HELIOS project and Generalitat Valenciana under PROMETEO-2010-087 R&D Excellency Program (NANOMET) are acknowledged. F. Y.Gardes, D. J. Thomson, and G. T. Reed are supported by funding received from the UK EPSRC funding body under the grant “UK Silicon Photonics.” The author A. M. Gutiérrez thanks D. Marpaung for his useful help.Gutiérrez Campo, AM.; Brimont, ACJ.; Herrera Llorente, J.; Aamer, M.; Martí Sendra, J.; Thomson, DJ.; Gardes, FY.... (2012). Silicon slow-light-based photonic mixer for microwave-frequencyconversion applications. Optics Letters. 37(10):1721-1723. https://doi.org/10.1364/OL.37.001721S17211723371

14.6-GHz LiNbO/sub 3/ microdisk photonic self-homodyne RF receiver

Nonlinear optical modulation combined with simultaneous photonic and RF resonance in an LiNbO/sub 3/ microdisk modulator is used to create a self-homodyne photonic RF receiver. Carrier and sidebands are mixed in the optical domain, and the modulated optical signal is detected using a photodetector. The photodetector has a bandwidth matched to the baseband signal. It filters out the high-frequency components and generates the baseband photocurrent. Receiver operation is demonstrated by demodulating up to 100-Mb/s digital data from a 14.6-GHz carrier frequency without any high-speed electronic components. A bit error rate of 10/sup -9/ is measured for 10-Mb/s downconverted digital data at -15-dBm received RF power. Preliminary results of employing this photonic RF receiver in a short-distance Ku-band wireless link demonstrate the potential of using high-quality optical microresonators in RF receiver applications

Basics of RF electronics

RF electronics deals with the generation, acquisition and manipulation of high-frequency signals. In particle accelerators signals of this kind are abundant, especially in the RF and beam diagnostics systems. In modern machines the complexity of the electronics assemblies dedicated to RF manipulation, beam diagnostics, and feedbacks is continuously increasing, following the demands for improvement of accelerator performance. However, these systems, and in particular their front-ends and back-ends, still rely on well-established basic hardware components and techniques, while down-converted and acquired signals are digitally processed exploiting the rapidly growing computational capability offered by the available technology. This lecture reviews the operational principles of the basic building blocks used for the treatment of high-frequency signals. Devices such as mixers, phase and amplitude detectors, modulators, filters, switches, directional couplers, oscillators, amplifiers, attenuators, and others are described in terms of equivalent circuits, scattering matrices, transfer functions; typical performance of commercially available models is presented. Owing to the breadth of the subject, this review is necessarily synthetic and non-exhaustive. Readers interested in the architecture of complete systems making use of the described components and devoted to generation and manipulation of the signals driving RF power plants and cavities may refer to the CAS lectures on Low-Level RF.Comment: 36 pages, contribution to the CAS - CERN Accelerator School: Specialised Course on RF for Accelerators; 8 - 17 Jun 2010, Ebeltoft, Denmar

Receiver architecture of the thousand-element array (THEA)

As part of the development of a new international radio-telescope SKA (Square Kilometre Array), an outdoor phasedarray prototype, the THousand Element Array (THEA), is being developed at NFRA. THEA is a phased array with 1024 active elements distributed on a regular grid over a surface of approximately 16 m2. The array is organised into 16 units denoted as tiles. THEA operates in the frequency band from 750 to 1500 MHz.\ud On a tile the signals from 64 antenna elements are converted into two independent RF beams. Two times 16 beams can be made simultaneously with full sensitivity by the real-time digital beam former of the THEA system. At the output of each tile the analog RF signal from a beam is converted into a 2 × 12-bit digital quadrature representation by a receiver system.\ud A double super-heterodyne architecture is used to mix the signal band of interest to an intermediate frequency of 210 MHz. The IF-signal is shifted to baseband by means of a partly digitally implemented I/Q mixer scheme. After a quadrature mixer stage, the I and Q signals are digitised by means of 12 bit A/D converters at 40 MS/s. Implementing a part of the mixing scheme digitally offers the flexibility to use different I/Q architectures, e.g. Hartley and Weaver mixer setups. This way the effect of RFI in different mixing architectures can be analyzed. After the digital processing, the samples are multiplexed, serialised and transported over fibres to the central adaptive digital beam former unit where the signals from all tiles are combined giving 32 beams.\ud This paper focuses on the design choices and the final implementation of the THEA system. In particular, the receiver architecture is addressed. A digital solution is presented, which enables switching between a Hartley and a Weaver based mixer scheme

Photonics-enabled sub-Nyquist radio frequency sensing based on temporal channelization and compressive sensing

A novel approach to sensing broadband radio frequency (RF) spectrum beyond the Nyquist limit based on photonic temporal channelization and compressive sensing is proposed. A spectrally-sparse RF signal with unknown frequencies is modulated onto a highly chirped optical pulse. An optical channelizer slices the modulated pulse spectrum, which is equivalent to temporally sampling the RF waveform thanks to the dispersion-induced wavelength-to-time mapping. This serial-to-parallel conversion avoids the use of a high-speed detector and digitizer. Furthermore, compressive sensing with optical random demodulation is achieved using a spatial light modulator, enabling the system to capture the wideband multi-tone RF signal with a sampling rate far lower than the Nyquist rate. It is demonstrated that the temporal channelization system with a channel spacing of 20 GHz achieves RF spectrum sensing with a high resolution of 196 MHz. With an equivalent sampling rate of only 25 GHz, a 50-GHz broadband two-tone RF signal can be captured and reconstructed by the system thanks to compressive sensing with a compression ratio of 4

Adaptive design of delta sigma modulators

In this thesis, a genetic algorithm based on differential evolution (DE) is used to generate delta sigma modulator (DSM) noise transfer functions (NTFs). These NTFs outperform those generated by an iterative approach described by Schreier and implemented in the delsig Matlab toolbox. Several lowpass and bandpass DSMs, as well as DSM\u27s designed specifically for and very low intermediate frequency (VLIF) receivers are designed using the algorithm developed in this thesis and compared to designs made using the delsig toolbox. The NTFs designed using the DE algorithm always have a higher dynamic range and signal to noise ratio than those designed using the delsig toolbox

Modeling and Efficient Cancellation of Nonlinear Self-Interference in MIMO Full-Duplex Transceivers

This paper addresses the modeling and digital cancellation of self-interference in in-band full-duplex (FD) transceivers with multiple transmit and receive antennas. The self-interference modeling and the proposed nonlinear spatio-temporal digital canceller structure takes into account, by design, the effects of I/Q modulator imbalances and power amplifier (PA) nonlinearities with memory, in addition to the multipath self-interference propagation channels and the analog RF cancellation stage. The proposed solution is the first cancellation technique in the literature which can handle such a self-interference scenario. It is shown by comprehensive simulations with realistic RF component parameters and with two different PA models to clearly outperform the current state-of-the-art digital self-interference cancellers, and to clearly extend the usable transmit power range.Comment: 7 pages, 5 figures. To be presented in the 2014 International Workshop on Emerging Technologies for 5G Wireless Cellular Network