Wavelength conversion for WDM communication systems using four-wavemixing in semiconductor optical amplifiers

Four-wave mixing (FWM) in semiconductor optical amplifiers is an attractive mechanism for wavelength conversion in wavelength-division multiplexed (WDM) systems since it provides modulation format and bit rate transparency over wide tuning ranges. A series of systems experiments evaluating several aspects of the performance of these devices at bit rates of 2.5 and 10 Gb/s are presented. Included are single-channel conversion over 18 nm of shift at 10 Gb/s, multichannel conversion, and cascaded conversions. In addition time resolved spectral analysis of wavelength conversion is presented

Folded-path self-pumped wavelength converter based on four-wave mixing in a semiconductor optical amplifier

A four-wave mixing wavelength converter with no external pump laser and very low input signal power requirements is characterized. The wavelength conversion occurs inside a high-reflection/antireflection coated semiconductor optical amplifier pigtailed with a fiber Bragg grating. The pump signal is provided by the lasing mode at the Bragg wavelength. A 1-mW optical signal modulated at 2.5 Gb/s is converted over 9 mm with error rates below 10^-9

Erbium-implanted high-Q silica toroidal microcavity laser on a silicon chip

Lasing from an erbium-doped high-Q silica toroidal microcavity coupled to a tapered optical fiber is demonstrated and analyzed. Average erbium ion concentrations were in the range 0.009–0.09 at. %, and a threshold power as low as 4.5 µW and an output lasing power as high as 39.4 µW are obtained from toroidal cavities with major diameters in the range 25–80 µm. Controlling lasing wavelength in a discrete way at each whispering-gallery mode was possible by changing the cavity loading, i.e., the distance between the tapered optical fiber and the microcavity. Analytic formulas predicting threshold power and differential slope efficiency are derived and their dependence on cavity loading, erbium ion concentration, and Q factor is analyzed. It is shown that the experimental results are in good agreement with the derived formulas

Inhomogeneous Gain Saturation in EDF: Experiment and Modeling

Erbium-Doped Fiber Amplifiers can present holes in spectral gain in Wavelength Division Multiplexing operation. The origin of this inhomogeneous saturation behavior is still a subject of controversy. In this paper we present both an experimental methods and a gain's model. Our experimental method allow us to measure the first homogeneous linewidth of the 1.5 $\mu$m erbium emission with gain spectral hole burning consistently with the other measurement in the literature and the model explains the differences observed in literature between GSHB and other measurement methods

Infrared generation in low-dimensional semiconductor heterostructures via quantum coherence

A new scheme for infrared generation without population inversion between subbands in quantum-well and quantum-dot lasers is presented and documented by detailed calculations. The scheme is based on the simultaneous generation at three frequencies: optical lasing at the two interband transitions which take place simultaneously, in the same active region, and serve as the coherent drive for the IR field. This mechanism for frequency down-conversion does not rely upon any ad hoc assumptions of long-lived coherences in the semiconductor active medium. And it should work efficiently at room temperature with injection current pumping. For optimized waveguide and cavity parameters, the intrinsic efficiency of the down-conversion process can reach the limiting quantum value corresponding to one infrared photon per one optical photon. Due to the parametric nature of IR generation, the proposed inversionless scheme is especially promising for long-wavelength (far- infrared) operation.Comment: 4 pages, 1 Postscript figure, Revtex style. Replacement corrects a printing error in the authors fiel

Demonstration of Optical Nonlinearity in InGaAsP/InP Passive Waveguides

We report on the study of the third-order nonlinear optical interactions in In$_{x}$Ga$_{1-x}$As$_{y}$P$_{1-y}$/InP strip-loaded waveguides. The material composition and waveguide structures were optimized for enhanced nonlinear optical interactions. We performed self-phase modulation, four-wave mixing and nonlinear absorption measurements at the pump wavelength 1568 nm in our waveguides. The nonlinear phase shift of up to $2.5\pi$ has been observed in self-phase modulation experiments. The measured value of the two-photon absorption coefficient $\alpha_2$ was 15 cm/GW. The four-wave mixing conversion range, representing the wavelength difference between maximally separated signal and idler spectral components, was observed to be 45 nm. Our results indicate that InGaAsP has a high potential as a material platform for nonlinear photonic devices, provided that the operation wavelength range outside the two-photon absorption window is selected

Development of a dc-ac power conditioner for wind generator by using neural network

This project present of development single phase DC-AC converter for wind generator application. The mathematical model of the wind generator and Artificial Neural Network control for DC-AC converter is derived. The controller is designed to stabilize the output voltage of DC-AC converter. To verify the effectiveness of the proposal controller, both simulation and experimental are developed. The simulation and experimental result show that the amplitude of output voltage of the DC-AC converter can be controlled