2,558 research outputs found
Development of active icosahedron and its application to virtual clay modeling
We have developed an active link mechanism for physical man-machine interaction. We report an active icosahedron consisting of intelligent cylinders and its application to virtual clay modeling. Intelligent pneumatic cylinders are newly developed to realize active link mechanisms. This cylinder aims at a novel cylinder in which various sensors and control devices are built. Active link mechanisms are highly integrated and enhanced by intelligent cylinders. A control system is built for the active icosahedron. In the control system, a key element is a control program implementing drawing of a virtual model on display and controlling of active links. Virtual clays are deformed by the program based on the apex positions converted from cylinder lengths. The active icosahedron realized dynamic interaction with virtual objects in PC, showing the potential of the devices as a haptic interface.</p
New actuators and their applications: from nano actuators to mega actuators
The present report describes R&D activities on new actuators undertaken at our laboratory at Okayama University for the past three years. These activities include various types of actuators, such as electromagnetic, electrostatic, piezoelectric, pneumatic, and hydraulic actuators, ranging in size and force from the nano to the mega range. These actuators are described in four categories: microactuators, power, intelligence, and novel principle.</p
Linear and nonlinear arx model for intelligent pneumatic actuator systems
System modeling in describing the dynamic behavior of the system is very important and can be considered as a challenging problem in control systems engineering. This article presents the linear and nonlinear approaches using AutoRegressive with Exogenous Input (ARX) model structure for the modeling of position control of an Intelligent Pneumatic Actuator (IPA) system. The input and output data of the system were obtained from real-time experiment conducted while the linear and nonlinear mathematical models of the system were obtained using system identification (SI) technique. Best fit and Akaike’s criteria were used to validate the models. The results based on simulation reveals that nonlinear ARX (NARX) had the best performance for the modeling of position control of IPA system. The results show that nonlinear modeling is an effective way of analyzing and describing the dynamic behavior and characteristics of IPA system. This approach is also expected to be able to be applied to other systems. A future study exploring the execution of other model structures in demonstrating the position control of IPA system would be exceptionally intriguing
Robotic Cane as a Soft SuperLimb for Elderly Sit-to-Stand Assistance
Many researchers have identified robotics as a potential solution to the
aging population faced by many developed and developing countries. If so, how
should we address the cognitive acceptance and ambient control of elderly
assistive robots through design? In this paper, we proposed an explorative
design of an ambient SuperLimb (Supernumerary Robotic Limb) system that
involves a pneumatically-driven robotic cane for at-home motion assistance, an
inflatable vest for compliant human-robot interaction, and a depth sensor for
ambient intention detection. The proposed system aims at providing active
assistance during the sit-to-stand transition for at-home usage by the elderly
at the bedside, in the chair, and on the toilet. We proposed a modified
biomechanical model with a linear cane robot for closed-loop control
implementation. We validated the design feasibility of the proposed ambient
SuperLimb system including the biomechanical model, our result showed the
advantages in reducing lower limb efforts and elderly fall risks, yet the
detection accuracy using depth sensing and adjustments on the model still
require further research in the future. Nevertheless, we summarized empirical
guidelines to support the ambient design of elderly-assistive SuperLimb systems
for lower limb functional augmentation.Comment: 8 pages, 9 figures, accepted for IEEE RoboSoft 202
Design and control of components-based integrated servo pneumatic drives
On-off traditional pneumatic drives are most widely used in industry offering
low-cost, simple but flexible mechanical operation and relatively high power to
weight ratio. For a period of decade from mid 1980's to 1990's, some initiatives
were made to develop servo pneumatic drives for most sophisticated
applications, employing purpose-designed control valves for pneumatic drives
and low friction cylinders. However, it is found that the high cost and complex
installation have discouraged the manufacturer from applying servo pneumatic
drives to industrial usage, making them less favourable in comparison to their
electric counterpart. This research aims to develop low-cost servo pneumatic
drives which are capable of point-to-point positioning tasks, suitable for
applications requiring intermediate performance characteristics. In achieving
this objective, a strategy that involves the use of traditional on-off valve, simple
control algorithm and distributed field-bus control networks has been adopted,
namely, the design and control of Components-based Integrated Pneumatic
Drives (CIPDs).
Firstly, a new pneumatic actuator servo motion control strategy has been
developed. With the new motion control strategy, the processes of positioning a
payload can be achieved by opening the control valve only once. Hence, lowspeed
on-off pneumatic control valves can be employed in keeping the cost low,
a key attraction for employing pneumatic drives. The new servo motion control
strategy also provides a way of controlling the load motion speed mechanically.
Meanwhile, a new PD-based three-state closed-loop control algorithm also has
been developed for the new control scheme. This control algorithm provides a
way of adapting traditional PID (Proportional Integral Derivative) control
theories for regulating pneumatic drives. Moreover, a deceleration control
strategy has been developed so that both high-speed and accurate positioning
control can be realised with low cost pneumatic drives. Secondly, the effects of system parameters on the transient response are studied. In assisting the analysis, a second order model is developed to encapsulate the velocity response characteristics of pneumatic drives to a step input signal. Stability
analyses for both open loop and closed-loop control have also been carried out
for the CIPDs with the newly developed motion control strategy. Thirdly, a
distributed control strategy employing Lon Works has been devised and
implemented, offering desirable attributes, high re-configurability, low cost and
easy in installation and maintenance, etc to keep with the traditional strength for
using pneumatic drives. By applying this technology, the CIPDs become
standard components in "real" and "virtual" design environments. A remote
service strategy for CIPDs using TCP/IP communication protocol has also been
developed.
Subsequently a range of experimental verifications has been carried out in the
research. The experimental study of high-speed motion control indicates that the
deceleration control strategy developed in the research can be an effective
method in improving the behaviour of high speed CIPDs. The verification of
open loop system behaviour of CIPDs shows that the model derived is largely
indicative of the likely behaviour for the system considered, and the steady state
velocity can be estimated using the Velocity Gain Kv. The evaluation made on a
pneumatically driven pick-and-place machine has also confirmed that the
system setup, including wiring, tuning, and system reconfiguration can be
achieved in relative ease. This pilot study reveals the potential for employing
CIPDs in building highly flexible cost effective manufacturing machines. It can
thus be concluded that this research has developed successfully a new
dimension and knowledge in both theoretical and practical terms in building
low-cost servo pneumatic drives, which are capable of point-to-point
positioning through employing traditional on-off pneumatic valves and
actuators and through their integration with distributed control technology
(LonWorks) by adopting a component-based design paradigm
Actuators and sensors for application in agricultural robots: A review
In recent years, with the rapid development of science and technology, agricultural robots have gradually begun to replace humans, to complete various agricultural operations, changing traditional agricultural production methods. Not only is the labor input reduced, but also the production efficiency can be improved, which invariably contributes to the development of smart agriculture. This paper reviews the core technologies used for agricultural robots in non-structural environments. In addition, we review the technological progress of drive systems, control strategies, end-effectors, robotic arms, environmental perception, and other related systems. This research shows that in a non-structured agricultural environment, using cameras and light detection and ranging (LiDAR), as well as ultrasonic and satellite navigation equipment, and by integrating sensing, transmission, control, and operation, different types of actuators can be innovatively designed and developed to drive the advance of agricultural robots, to meet the delicate and complex requirements of agricultural products as operational objects, such that better productivity and standardization of agriculture can be achieved. In summary, agricultural production is developing toward a data-driven, standardized, and unmanned approach, with smart agriculture supported by actuator-driven-based agricultural robots. This paper concludes with a summary of the main existing technologies and challenges in the development of actuators for applications in agricultural robots, and the outlook regarding the primary development directions of agricultural robots in the near future
A Review of Pneumatic Actuators Used for the Design of Medical Simulators and Medical Tools
International audienc
Design of a 3D-printed soft robotic hand with distributed tactile sensing for multi-grasp object identification
Tactile object identification is essential in environments where vision is occluded or when intrinsic object properties such as weight or stiffness need to be discriminated between. The robotic approach to this task has traditionally been to use rigid-bodied robots equipped with complex control schemes to explore different objects. However, whilst varying degrees of success have been demonstrated, these approaches are limited in their generalisability due to the complexity of the control schemes required to facilitate safe interactions with diverse objects. In this regard, Soft Robotics has garnered increased attention in the past decade due to the ability to exploit Morphological Computation through the agent's body to simplify the task by conforming naturally to the geometry of objects being explored. This exists as a paradigm shift in the design of robots since Soft Robotics seeks to take inspiration from biological solutions and embody adaptability in order to interact with the environment rather than relying on centralised computation.
In this thesis, we formulate, simplify, and solve an object identification task using Soft Robotic principles. We design an anthropomorphic hand that has human-like range of motion and compliance in the actuation and sensing. The range of motion is validated through the Feix GRASP taxonomy and the Kapandji Thumb Opposition test. The hand is monolithically fabricated using multi-material 3D printing to enable the exploitation of different material properties within the same body and limit variability between samples. The hand's compliance facilitates adaptable grasping of a wide range of objects and features integrated distributed tactile sensing. We emulate the human approach of integrating information from multiple contacts and grasps of objects to discriminate between them. Two bespoke neural networks are designed to extract patterns from both the tactile data and the relationships between grasps to facilitate high classification accuracy
A modern teaching environment for process automation
Emergence of the new technological trends such as Open Platform Communications Unified Architecture (OPC UA), Industrial Ethernet, cloud computing and the 5th wireless network (5G) enabled the implementation of Cyber-physical System (CPS) with flexible, configurable, scalable and interoperable business models. This provides new opportunities for the process automation systems. On the other hand, the constant urge of industries for cost and material efficient processes demands a new automation paradigm with the latest tools and technologies which should be taken into account while teaching future automation engineers.
In this thesis, the modern teaching environment for process automation is designed, implemented and described. This work explains the connections, configurations and the test of three mini plants including the Multiple Heat Exchanger, the Three-tank system and the Mixing Tank. In addition, OPC UA communication between the server and its clients has been tested. The plants are a part of the state of the art of the architecture that provides the access of ABB 800xA to the cloud services via OPC UA over the 5G test wireless network. This new paradigm changes the old automation hierarchy and enables the cross layered communication in the old architecture.
This modern teaching environment prepares the students for the future automation challenges with the latest tools and merges data analytics, cloud computing and wireless network studies with process automation. It also provides the unique chance of testing the future trends together in this unique process automation setup
Recommended from our members
A Study on Active/Passive Pneumatic Actuators for Assistive Systems
The need for intelligent assistive devices is growing. Due to advances in medicine, people are living longer and able to recover from severe neurological incidents, resulting in an increased population with neuromuscular weakness. In workplaces such as assembly lines, there is a high possibility of work-related fatigue or injury, such as when workers squat down or lift their arms during their work tasks. Assistive devices could help remedy loss of strength on their extremities as well as keep the work environment safe and productive, allowing these growing segments of the population in need of the devices to live more self-sufficient, productive, and higher-quality lives.In the design of assistive systems, an important design goal is prolonged operational time, which requires the minimum usage of energy. Energy consumption can be reduced by modifying the mechanical characteristics of assistive systems according to the dynamic characteristics of the human body, which vary considerably between tasks. This dissertation investigates 1) the design of actuators with adjustable mechanical impedance, 2) control strategies to search for, and adjust to, a suitable mechanical impedance for assistance and 3) sensing technologies for classifying the tasks in which the human engages.The first part of this dissertation characterizes a pneumatic variable stiffness actuator named an Active/Passive Pneumatic Actuator (AP2A). The actuator consists of an air cylinder and an array of solenoid valves. These valves and the corresponding switching algorithms tune the chamber pressures and make the AP2A function as a mechanical spring with desired stiffness. The actuator has a low mechanical impedance compared to geared motors, which enables it to achieve efficient interaction. Control strategies of an assistive system with the AP2A are discussed in the second part. This control framework utilizes the characteristics of the AP2A to provide assistance when necessary and to operate transparently (i.e., neither to assist nor to disturb the users) otherwise. Energy consumed by the AP2A and the assisted system is minimized by solving an optimal control problem. Finally, an estimator is introduced to detect assistive timing for the assistive system with the AP2A. This estimator utilizes physiological signals such as surface electromyogram and prior knowledge of a muscular model, classifying if the user is under the specified condition to be assisted by the AP2A. It demonstrates that the user's effort can be saved, also reducing the number of procedures to collect training data for the estimator before using assistive systems. The performance of the actuator, the controller, and the estimator proposed in this dissertation are verified through experiments.From the above, this dissertation contributes to developing the AP2A that provides assistance and saves energy usage of assistive systems by working as a mechanical spring with stiffness optimized for achieving effective interaction under specific conditions. This actuator supports assistive devices that can be deployed in the real world, properly assisting the users when needed
- …