Hire Education: Mastery, Modularization and the Workforce Revolution

This new research identifies online competency-based learning as the solution to shifting demands for specialized workforce skills and the front runner for disrupting higher education

A Mobile Platform Using Software Defined Radios For Wireless Communication Systems Experimentation

A distinctive feature of wireless communication systems is implied by the fact that there is no physical connection between the transmitter and its corresponding receiver, which enables user mobility. However, experimenting with wireless communication systems is mostly done in the lab, where transmitters and receivers are setup on benches, in stationary settings. This prevents students from experiencing fading and other propagation effects associated with mobile wireless channels. This paper describes a mobile platform for wireless communication experimentation that enables students to run experiments beyond the confines of a traditional lab, in realistic settings that cover indoor and outdoor scenarios with both fixed and mobile propagation characteristics. The platform presented consists of a Universal Software Radio Peripheral (USRP) from National Instruments to implement the transmitter, an affordable RTL-SDR USB dongle to implement the receiver, a laptop computer used to program the SDR boards, and equipment for visualizing radio signal characteristics such as a portable spectrum analyzer or oscilloscope. This choice results in a moderate overall cost for the radio hardware required by the platform, which can be easily programmed using open source software such as GNU Radio as well as software packages like Matlab or LabView. For experimentation in wireless scenarios with low mobility (both indoors and outdoors, corresponding to walking speeds) the transmitter and receiver may be placed on push carts, while for higher mobility they may be placed on university owned golf carts moving at faster speeds on the designated campus routes. Furthermore, mobile transmitters and receivers may also be placed in cars driving on the campus streets and through the university parking lots/garages to enable experiments simulating vehicle to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications

Remote laboratory: using Internet-of-Things (IoT) for E-learning

In order to equip engineering E-learners with realistic hands-on laboratory experience, remote access to an operating lab may be provided. Such an access can be implemented using live video streaming from a physical lab coupled with IoT telemetry and telecontrol. The progress of an ongoing remote laboratory project is presented. Three different video streaming solutions were compared side-by-side, the back end electronic architecture was fully developed and the most notable observations are now reported

Systems for pervasive electronics and interfaces

Energy Harvesting Active Networked Tags (EnHANTs) are a new type of wireless device in the domain between RFIDs and sensor networks. Future EnHANTs will be small, flexible, and self-powered devices that can be attached to everyday objects that are traditionally not networked to enable "Internet of Things" applications. This work describes the design and development of the EnHANT prototypes and testbed. The current prototypes use thin-film photovoltaics optimized for indoor light harvesting, form multihop networks using ultra-low-power Ultra-Wideband Impulse Radio (UWB-IR) transceivers, and implement energy harvesting adaptive networking protocols. The current testbed enables the evaluation of different algorithms by exposing individual prototypes to repeatable light conditions based on real-world irradiance data. New approaches to characterizing the energy available to energy harvesting devices were explored. A mobile data-logger was used to record the intensity of ambient light, determine the light source, and record the acceleration from motion during different real world activities. These traces were used to model the behavior of photovoltaic and inertial energy harvesters in real world deployments and can be replayed in the EnHANTs testbed. In addition, new techniques to evaluate the efficiency of different photovoltaic technologies under indoor illumination were developed. A proof-of-concept system was built to characterize photovoltaics under a standardized set of conditions in which the radiant intensity and spectral composition of the light source were systematically varied. Techniques to structure student research projects within the EnHANTs project were developed. Project-based learning approaches were implemented to engage students using real-world system development constraints. A survey of the students showed that this approach is an effective method for developing technical, professional, and soft skills. Open source hardware was also applied to EnHANTs project and extended into other domains. A laboratory-based class in flat panel display technology was developed. The course introduces fundamental concepts of display systems and reinforces these concepts through the fabrication of three display devices. A lab kit platform was developed to enable remote students to use low-cost, course specific hardware to complete the lab exercises remotely. This platform was also applied to external projects targeted at non-university students. A workshop was developed to teach artists, designers, and hobbyists how to design and build custom user interfaces using thin-film electronics and rapid prototyping tools. Surveys of the students and workshop participants showed that this platform is an effective teaching tool and can be easily adapted and expanded

Small Unmanned Aircraft Systems for Project-Based Engineering Education

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/143092/1/6.2017-1377.pd

The Circuit, Spring 2014

Table of Contents: Department News Research News Alumni Spotlight Faculty News 2013 Highlightshttps://digitalcommons.mtu.edu/ece-newsletters/1001/thumbnail.jp

The Boston University Photonics Center annual report 2014-2015

This repository item contains an annual report that summarizes activities of the Boston University Photonics Center in the 2014-2015 academic year. The report provides quantitative and descriptive information regarding photonics programs in education, interdisciplinary research, business innovation, and technology development. The Boston University Photonics Center (BUPC) is an interdisciplinary hub for education, research, scholarship, innovation, and technology development associated with practical uses of light.This has been a good year for the Photonics Center. In the following pages, you will see that the center’s faculty received prodigious honors and awards, generated more than 100 notable scholarly publications in the leading journals in our field, and attracted $18.6M in new research grants/contracts. Faculty and staff also expanded their efforts in education and training, and were awarded two new National Science Foundation– sponsored sites for Research Experiences for Undergraduates and for Teachers. As a community, we hosted a compelling series of distinguished invited speakers, and emphasized the theme of Advanced Materials by Design for the 21st Century at our annual symposium. We continued to support the National Photonics Initiative, and are a part of a New York–based consortium that won the competition for a new photonics- themed node in the National Network of Manufacturing Institutes. Highlights of our research achievements for the year include an ambitious new DoD-sponsored grant for Multi-Scale Multi-Disciplinary Modeling of Electronic Materials led by Professor Enrico Bellotti, continued support of our NIH-sponsored Center for Innovation in Point of Care Technologies for the Future of Cancer Care led by Professor Catherine Klapperich, a new award for Personalized Chemotherapy Through Rapid Monitoring with Wearable Optics led by Assistant Professor Darren Roblyer, and a new award from DARPA to conduct research on Calligraphy to Build Tunable Optical Metamaterials led by Professor Dave Bishop. We were also honored to receive an award from the Massachusetts Life Sciences Center to develop a biophotonics laboratory in our Business Innovation Center

Serbia - public sector accounting review : report on the enhancement of public sector financial reporting

The government’s public financial management (PFM) Reform Program 2016-2020 foresees the gradual transition of public sector financial reporting from a cash basis to an accrual basis of accounting and the application of International Public Sector Accounting Standards (IPSAS). This will significantly improve the quality of financial information and should enable better informed decision-making, more efficient use of public funds and resources and improved fiscal performance. This Report on the Enhancement of Public Sector Financial Reporting is one output of the Serbia Public Sector Accounting Reform Technical Assistance project funded by the Swiss State Secretariat for Economic Affairs (SECO) through the Strengthening Accountability and Fiduciary Environment (SAFE) Trust Fund under the Public Sector Accounting and Reporting Program (PULSAR) which provides support for the development and implementation of public sector accounting standards. This report supports the development of a plan towards that goal by assessing the institutional framework for public sector accounting as well as the gap between Serbian public sector generally accepted accounting principles (PS GAAP) and IPSAS