MIRAI Architecture for Heterogeneous Network

One of the keywords that describe next-generation wireless communications is "seamless." As part of the e-Japan Plan promoted by the Japanese Government, the Multimedia Integrated Network by Radio Access Innovation project has as its goal the development of new technologies to enable seamless integration of various wireless access systems for practical use by 2005. This article describes a heterogeneous network architecture including a common tool, a common platform, and a common access. In particular, software-defined radio technologies are used to develop a multiservice user terminal to access different wireless networks. The common platform for various wireless networks is based on a wireless-supporting IPv6 network. A basic access network, separated from other wireless access networks, is used as a means for wireless system discovery, signaling, and paging. A proof-of-concept experimental demonstration system is available

Quality of Service over Specific Link Layers: state of the art report

The Integrated Services concept is proposed as an enhancement to the current Internet architecture, to provide a better Quality of Service (QoS) than that provided by the traditional Best-Effort service. The features of the Integrated Services are explained in this report. To support Integrated Services, certain requirements are posed on the underlying link layer. These requirements are studied by the Integrated Services over Specific Link Layers (ISSLL) IETF working group. The status of this ongoing research is reported in this document. To be more specific, the solutions to provide Integrated Services over ATM, IEEE 802 LAN technologies and low-bitrate links are evaluated in detail. The ISSLL working group has not yet studied the requirements, that are posed on the underlying link layer, when this link layer is wireless. Therefore, this state of the art report is extended with an identification of the requirements that are posed on the underlying wireless link, to provide differentiated Quality of Service

A framework for fast handoff schemes in wireless ATM networks

Includes bibliographical references.In this research, we focus on providing a framework that extends the fixed ATM standard to support user mobility in future WATM networks. The WATM architecture allows for the migration of fixed ATM networks without major modifications. Thus most of the mobility functions are implemented on the wireless access network. The most important component supporting mobility in a cluster is the Mobility Enhanced Switch (MES). We propose using direct links between adjacent MESs to support Permanent Virtual Channels (PVCs) in order to facilitate fast inter-cluster handoffwith minimum handofflatency. This research addresses a framework on handoff mobility by proposing three fast handoff re-routing schemes based on the support of PVCs

Low-complexity medium access control protocols for QoS support in third-generation radio access networks

One approach to maximizing the efficiency of medium access control (MAC) on the uplink in a future wideband code-division multiple-access (WCDMA)-based third-generation radio access network, and hence maximize spectral efficiency, is to employ a low-complexity distributed scheduling control approach. The maximization of spectral efficiency in third-generation radio access networks is complicated by the need to provide bandwidth-on-demand to diverse services characterized by diverse quality of service (QoS) requirements in an interference limited environment. However, the ability to exploit the full potential of resource allocation algorithms in third-generation radio access networks has been limited by the absence of a metric that captures the two-dimensional radio resource requirement, in terms of power and bandwidth, in the third-generation radio access network environment, where different users may have different signal-to-interference ratio requirements. This paper presents a novel resource metric as a solution to this fundamental problem. Also, a novel deadline-driven backoff procedure has been presented as the backoff scheme of the proposed distributed scheduling MAC protocols to enable the efficient support of services with QoS imposed delay constraints without the need for centralized scheduling. The main conclusion is that low-complexity distributed scheduling control strategies using overload avoidance/overload detection can be designed using the proposed resource metric to give near optimal performance and thus maintain a high spectral efficiency in third-generation radio access networks and that importantly overload detection is superior to overload avoidance

Satellite ATM network architectures: An overview

A satellite ATM network has been envisioned as the next information super-skyway. There has been a migration from traditional bent pipe satellites to onboard processing) ATM satellites. The current congestion in the Internet has motivated the use of alternate paths - using satellites to support global Internet transport and access. This article presents the various system and protocol layer architectures of SATM networks.published_or_final_versio

Softswitch Design and Performance Analysis

The increasing number of subscribers’ demands in telecommunication sector has motivated the operators to provide high quality of service in cost effective way. Moreover, operators need to have an open structure system so that they can move their systems to the next generation network architecture. For this purpose, Softswitch is an appropriate technology because it is a safe and cost efficient solution and though it can migrate from traditional circuit-switching based telephone system to internet protocol packet-switching based networking. Softswitch network divides the logical switch into several parts with different functions such as signaling gateway, media gateway, media server, etc. Standard communication protocols are implemented between those parts. Softswitch is software-based system to make connection between devices, and moreover to control voice calls, data and routes calls through different entities of the networks. Softswitch supports management functions such as provisioning, fault handling and reporting, billing, operational support, etc. Softswitch suitable for all types of traffic and services so it is very demanding in the competitive world of mobile operators. In this thesis, Softswitch has been studied and analyzed in details. Softswitch network consisted of different integrated modules such as transportation, calling and signaling, service application and management. Each module provides different services such as call control, routing, billing and network management. Each module is discussed from functional and service point of views. Softswitch based wireless network architecture as well as variety of service solutions is presented. Different protocol interfaces in softswitch network such as signaling system number 7 are explained. Moreover, bearer calls, independent call control protocol, gateway control protocol, IP bearer control protocol are explained as well. Variety of softswitch network architectures analysis has been done based on their performance and the applicability. Three Softswitch network architectures are proposed which are validated through simulations.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Flat Cellular (UMTS) Networks

Traditionally, cellular systems have been built in a hierarchical manner: many specialized cellular access network elements that collectively form a hierarchical cellular system. When 2G and later 3G systems were designed there was a good reason to make system hierarchical: from a cost-perspective it was better to concentrate traffic and to share the cost of processing equipment over a large set of users while keeping the base stations relatively cheap. However, we believe the economic reasons for designing cellular systems in a hierarchical manner have disappeared: in fact, hierarchical architectures hinder future efficient deployments. In this paper, we argue for completely flat cellular wireless systems, which need just one type of specialized network element to provide radio access network (RAN) functionality, supplemented by standard IP-based network elements to form a cellular network. While the reason for building a cellular system in a hierarchical fashion has disappeared, there are other good reasons to make the system architecture flat: (1) as wireless transmission techniques evolve into hybrid ARQ systems, there is less need for a hierarchical cellular system to support spatial diversity; (2) we foresee that future cellular networks are part of the Internet, while hierarchical systems typically use interfaces between network elements that are specific to cellular standards or proprietary. At best such systems use IP as a transport medium, not as a core component; (3) a flat cellular system can be self scaling while a hierarchical system has inherent scaling issues; (4) moving all access technologies to the edge of the network enables ease of converging access technologies into a common packet core; and (5) using an IP common core makes the cellular network part of the Internet