Adaptive Explicit Congestion Notification (AECN) for Heterogeneous Flows

Previous research on ECN and RED usually considered only a limited traffic domain, focusing on networks with a small number of homogeneous flows. The behavior of RED and ECN congestion control mechanisms in TCP network with many competing heterogeneous flows in the bottleneck link, hasn\u27t been sufficiently explored. This thesis first investigates the behavior and performance of RED with ECN congestion control mechanisms with many heterogeneous TCP Reno flows using the network simulation tool, ns-2. By comparing the simulated performance of RED and ECN routers, this study finds that ECN does provide better goodput and fairness than RED for heterogeneous flows. However, when the demand is held constant, the number of flows generating the demand has a negative effect on performance. Meanwhile, the simulations with many flows demonstrate that the bottleneck router\u27s marking probability must be aggressively increased to provide good ECN performance. Based on these simulation results, an Adaptive ECN algorithm (AECN) was studied to further improve the goodput and fairness of ECN. AECN divides all flows competing for a bottleneck into three flow groups, and deploys a different max for each flow group. Meanwhile, AECN also adjusts min for the robust flow group and max to get higher performance when the number of flows grows large. Furthermore, AECN uses mark-front strategy, instead of mark-tail strategy in standard ECN. A series of AECN simulations were run in ns-2. The simulations show clearly that AECN treats each flow fairer than ECN with the two fairness measurements: Jain\u27s fairness index and visual max-min fairness. AECN has fewer packet drops and alleviates the lockout phenomenon and yields higher goodput than ECN

TCP performance enhancement in wireless networks via adaptive congestion control and active queue management

The transmission control protocol (TCP) exhibits poor performance when used in error-prone wireless networks. Remedy to this problem has been an active research area. However, a widely accepted and adopted solution is yet to emerge. Difficulties of an acceptable solution lie in the areas of compatibility, scalability, computational complexity and the involvement of intermediate routers and switches. This dissertation rexriews the current start-of-the-art solutions to TCP performance enhancement, and pursues an end-to-end solution framework to the problem. The most noticeable cause of the performance degradation of TCP in wireless networks is the higher packet loss rate as compared to that in traditional wired networks. Packet loss type differentiation has been the focus of many proposed TCP performance enhancement schemes. Studies conduced by this dissertation research suggest that besides the standard TCP\u27s inability of discriminating congestion packet losses from losses related to wireless link errors, the standard TCP\u27s additive increase and multiplicative decrease (AIMD) congestion control algorithm itself needs to be redesigned to achieve better performance in wireless, and particularly, high-speed wireless networks. This dissertation proposes a simple, efficient, and effective end-to-end solution framework that enhances TCP\u27s performance through techniques of adaptive congestion control and active queue management. By end-to-end, it means a solution with no requirement of routers being wireless-aware or wireless-specific . TCP-Jersey has been introduced as an implementation of the proposed solution framework, and its performance metrics have been evaluated through extensive simulations. TCP-Jersey consists of an adaptive congestion control algorithm at the source by means of the source\u27s achievable rate estimation (ARE) —an adaptive filter of packet inter-arrival times, a congestion indication algorithm at the links (i.e., AQM) by means of packet marking, and a effective loss differentiation algorithm at the source by careful examination of the congestion marks carried by the duplicate acknowledgment packets (DUPACK). Several improvements to the proposed TCP-Jersey have been investigated, including a more robust ARE algorithm, a less computationally intensive threshold marking algorithm as the AQM link algorithm, a more stable congestion indication function based on virtual capacity at the link, and performance results have been presented and analyzed via extensive simulations of various network configurations. Stability analysis of the proposed ARE-based additive increase and adaptive decrease (AJAD) congestion control algorithm has been conducted and the analytical results have been verified by simulations. Performance of TCP-Jersey has been compared to that of a perfect , but not practical, TCP scheme, and encouraging results have been observed. Finally the framework of the TCP-Jersey\u27s source algorithm has been extended and generalized for rate-based congestion control, as opposed to TCP\u27s window-based congestion control, to provide a design platform for applications, such as real-time multimedia, that do not use TCP as transport protocol yet do need to control network congestion as well as combat packet losses in wireless networks. In conclusion, the framework architecture presented in this dissertation that combines the adaptive congestion control and active queue management in solving the TCP performance degradation problem in wireless networks has been shown as a promising answer to the problem due to its simplistic design philosophy complete compatibility with the current TCP/IP and AQM practice, end-to-end architecture for scalability, and the high effectiveness and low computational overhead. The proposed implementation of the solution framework, namely TCP-Jersey is a modification of the standard TCP protocol rather than a completely new design of the transport protocol. It is an end-to-end approach to address the performance degradation problem since it does not require split mode connection establishment and maintenance using special wireless-aware software agents at the routers. The proposed solution also differs from other solutions that rely on the link layer error notifications for packet loss differentiation. The proposed solution is also unique among other proposed end-to-end solutions in that it differentiates packet losses attributed to wireless link errors from congestion induced packet losses directly from the explicit congestion indication marks in the DUPACK packets, rather than inferring the loss type based on packet delay or delay jitter as in many other proposed solutions; nor by undergoing a computationally expensive off-line training of a classification model (e.g., HMM), or a Bayesian estimation/detection process that requires estimations of a priori loss probability distributions of different loss types. The proposed solution is also scalable and fully compatible to the current practice in Internet congestion control and queue management, but with an additional function of loss type differentiation that effectively enhances TCP\u27s performance over error-prone wireless networks. Limitations of the proposed solution architecture and areas for future researches are also addressed

EVEREST IST - 2002 - 00185 : D23 : final report

Deliverable públic del projecte europeu EVERESTThis deliverable constitutes the final report of the project IST-2002-001858 EVEREST. After its successful completion, the project presents this document that firstly summarizes the context, goal and the approach objective of the project. Then it presents a concise summary of the major goals and results, as well as highlights the most valuable lessons derived form the project work. A list of deliverables and publications is included in the annex.Postprint (published version

Active Queue Management for Fair Resource Allocation in Wireless Networks

This paper investigates the interaction between end-to-end flow control and MAC-layer scheduling on wireless links. We consider a wireless network with multiple users receiving information from a common access point; each user suffers fading, and a scheduler allocates the channel based on channel quality,but subject to fairness and latency considerations. We show that the fairness property of the scheduler is compromised by the transport layer flow control of TCP New Reno. We provide a receiver-side control algorithm, CLAMP, that remedies this situation. CLAMP works at a receiver to control a TCP sender by setting the TCP receiver's advertised window limit, and this allows the scheduler to allocate bandwidth fairly between the users

PluralisMAC: a generic multi-MAC framework for heterogeneous, multiservice wireless networks, applied to smart containers

Developing energy-efficient MAC protocols for lightweight wireless systems has been a challenging task for decades because of the specific requirements of various applications and the varying environments in which wireless systems are deployed. Many MAC protocols for wireless networks have been proposed, often custom-made for a specific application. It is clear that one MAC does not fit all the requirements. So, how should a MAC layer deal with an application that has several modes (each with different requirements) or with the deployment of another application during the lifetime of the system? Especially in a mobile wireless system, like Smart Monitoring of Containers, we cannot know in advance the application state (empty container versus stuffed container). Dynamic switching between different energy-efficient MAC strategies is needed. Our architecture, called PluralisMAC, contains a generic multi-MAC framework and a generic neighbour monitoring and filtering framework. To validate the real-world feasibility of our architecture, we have implemented it in TinyOS and have done experiments on the TMote Sky nodes in the w-iLab.t testbed. Experimental results show that dynamic switching between MAC strategies is possible with minimal receive chain overhead, while meeting the various application requirements (reliability and low-energy consumption)

WHITE - Achieving Fair Bandwidth Allocation with Priority Dropping Based On Round Trip Times

Current congestion control approaches that attempt to provide fair bandwidth allocation among competing flows primarily consider only data rate when making decisions on which packets to drop. However, responsive flows with high round trip times (RTTs) can still receive significantly less bandwidth than responsive flows with low round trip times. This paper proposes a congestion control scheme called WHITE that addresses router unfairness in handling flows with significantly different RTTs. Using a best-case estimate of a flow\u27s RTT provided in each packet by the flow source or by an edge router, WHITE computes a stabilized average RTT. The average RTT is then compared with the RTT of each incoming packet, dynamically adjusting the drop probability so as to protect the bandwidth of flows with high RTTs while curtailing the bandwidth of flows with low RTTs. We present simulation results and analysis that demonstrate that WHITE provides better fairness than other rate-based congestion control strategies over a wide-range of traffic conditions. The improved fairness of WHITE comes close to the fairness of Fair Queuing without requiring per flow state information at the router

A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System

Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patient’s measurements in reliable e-Health ecosystem. As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres. Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ‘’Priority Based-Fair Queuing’’ (PFQ) where a new priority level and concept of ‘’Patient’s Health Record’’ (PHR) has been developed and integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ). PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases. Thus, a derivative from the PFQ model has been developed to create a new version namely “Priority Based-Fair Queuing-Tolerated Delay” (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model

Design of Feedback Controls Supporting TCP Based on the State–Space Approach

This paper investigates how to design feedback controls supporting transmission control protocol (TCP) based on the state-space approach for the linearized system of the well-known additive increase multiplicative decrease (AIMD) dynamic model. We formulate the feedback control design problem as state-space models without assuming its structure in advance. Thereby, we get three results that have not been observed by previous studies on the congestion control problem. 1) In order to fully support TCP, we need a proportional-derivative (PD)-type state-feedback control structure in terms of queue length (or RTT: round trip time). This backs up the conjecture in the networking literature that the AQM RED is not enough to control TCP dynamic behavior, where RED can be classified as a P-type AQM (or as an output feedback control for the linearized AIMD model). 2) In order to fully support TCP in the presence of delays, we derive delay-dependent feedback control structures to compensate for delays explicitly under the assumption that RTT, capacity and number of sources are known, where all existing AQMs including RED, REM/PI and AVQ are delay-independent controls. 3) In an attempt to interpret different AQM structures in a unified manner rather than to compare them via simulations, we propose a PID-type mathematical framework using integral control action. As a performance index to measure the deviation of the closed-loop system from an equilibrium point, we use a linear quadratic (LQ) cost of the transients of state and control variables such as queue length, aggregate rate, jitter in the aggregate rate, and congestion measure. Stabilizing gains of the feedback control structures are obtained minimizing the LQ cost. Then, we discuss the impact of the control structure on performance using the PID-type mathematical framework. All results are extended to the case of multiple links and heterogeneous delays