Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays

Massive MIMO (multiple-input multiple-output) is no longer a "wild" or "promising" concept for future cellular networks - in 2018 it became a reality. Base stations (BSs) with 64 fully digital transceiver chains were commercially deployed in several countries, the key ingredients of Massive MIMO have made it into the 5G standard, the signal processing methods required to achieve unprecedented spectral efficiency have been developed, and the limitation due to pilot contamination has been resolved. Even the development of fully digital Massive MIMO arrays for mmWave frequencies - once viewed prohibitively complicated and costly - is well underway. In a few years, Massive MIMO with fully digital transceivers will be a mainstream feature at both sub-6 GHz and mmWave frequencies. In this paper, we explain how the first chapter of the Massive MIMO research saga has come to an end, while the story has just begun. The coming wide-scale deployment of BSs with massive antenna arrays opens the door to a brand new world where spatial processing capabilities are omnipresent. In addition to mobile broadband services, the antennas can be used for other communication applications, such as low-power machine-type or ultra-reliable communications, as well as non-communication applications such as radar, sensing and positioning. We outline five new Massive MIMO related research directions: Extremely large aperture arrays, Holographic Massive MIMO, Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin

Attack Resilience and Recovery using Physical Challenge Response Authentication for Active Sensors Under Integrity Attacks

Embedded sensing systems are pervasively used in life- and security-critical systems such as those found in airplanes, automobiles, and healthcare. Traditional security mechanisms for these sensors focus on data encryption and other post-processing techniques, but the sensors themselves often remain vulnerable to attacks in the physical/analog domain. If an adversary manipulates a physical/analog signal prior to digitization, no amount of digital security mechanisms after the fact can help. Fortunately, nature imposes fundamental constraints on how these analog signals can behave. This work presents PyCRA, a physical challenge-response authentication scheme designed to protect active sensing systems against physical attacks occurring in the analog domain. PyCRA provides security for active sensors by continually challenging the surrounding environment via random but deliberate physical probes. By analyzing the responses to these probes, and by using the fact that the adversary cannot change the underlying laws of physics, we provide an authentication mechanism that not only detects malicious attacks but provides resilience against them. We demonstrate the effectiveness of PyCRA through several case studies using two sensing systems: (1) magnetic sensors like those found wheel speed sensors in robotics and automotive, and (2) commercial RFID tags used in many security-critical applications. Finally, we outline methods and theoretical proofs for further enhancing the resilience of PyCRA to active attacks by means of a confusion phase---a period of low signal to noise ratio that makes it more difficult for an attacker to correctly identify and respond to PyCRA's physical challenges. In doing so, we evaluate both the robustness and the limitations of PyCRA, concluding by outlining practical considerations as well as further applications for the proposed authentication mechanism.Comment: Shorter version appeared in ACM ACM Conference on Computer and Communications (CCS) 201

Low cost passive radar through software defined radio

Passive radars utilise existing terrestrial radio signals, such as those produced by radio or television stations, to track objects within their range. This project aims to determine the suitability of low cost USB TV tuners as hardware receivers for a Software Defined Radio (SDR) based passive radar receiver. Subsequently determining its effectiveness in producing inverse synthetic aperture radar images using data collected from Digital Television signals. Since the initial identification of passive radar, Militaries the world over have been using it as a part of electronic warfare. The evolution of SDR has enabled greater access to the technologies required to implement passive radar, with the greatest limitation being the cost of the required hardware. The availability of low cost hardware was therefore investigated to determine its suitability and subsequently the availability of passive radar to a wider audience. Research was conducted into the available SDR receivers, and comparison of specifications was made against the low cost receiver used in the project. A functional hardware platform based around the Realtek RTL2832U chipset has been developed to determine its suitability as a low cost receiver verifying its ability to coherently receive radio signals for target identification. A complex ambiguity function was implemented to interpret sampled data windows, with the output of these windows to be compared to the requirements for an inverse synthetic aperture radar input, thus determining the suitability of the device. Interpretation of the received data has identified that although the hardware is capable, a real time implementation of data processing is not yet possible, impeding the ability to determine the suitability of the receiver as an inverse synthetic aperture receiver. The results of testing show that the hardware is capable of receiving and producing radar images, however due to the bandwidth of DVB-T signals , and the bandwidth limitations inherent in RTL-SDR dongles, they have proven not to be suitable for DVB-T based inverse synthetic aperture radar receivers

Aircraft state estimation using cameras and passive radar

Multiple target tracking (MTT) is a fundamental task in many application domains. It is a difficult problem to solve in general, so applications make use of domain specific and problem-specific knowledge to approach the problem by solving subtasks separately. This work puts forward a MTT framework (MTTF) which is based on the Bayesian recursive estimator (BRE). The MTTF extends a particle filter (PF) to handle the multiple targets and adds a probabilistic graphical model (PGM) data association stage to compute the mapping from detections to trackers. The MTTF was applied to the problem of passively monitoring airspace. Two applications were built: a passive radar MTT module and a comprehensive visual object tracking (VOT) system. Both applications require a solution to the MTT problem, for which the MTTF was utilized. The VOT system performed well on real data recorded at the University of Cape Town (UCT) as part of this investigation. The system was able to detect and track aircraft flying within the region of interest (ROI). The VOT system consisted of a single camera, an image processing module, the MTTF module and an evaluation module. The world coordinate frame target localization was within ±3.2 km and these results are presented on Google Earth. The image plane target localization has an average reprojection error of ±17.3 pixels. The VOT system achieved an average area under the curve value of 0.77 for all receiver operating characteristic curves. These performance figures are typical over the ±1 hr of video recordings taken from the UCT site. The passive radar application was tested on simulated data. The MTTF module was designed to connect to an existing passive radar system developed by Peralex Electronics Pty Ltd. The MTTF module estimated the number of targets in the scene and localized them within a 2D local world Cartesian coordinate system. The investigations encompass numerous areas of research as well as practical aspects of software engineering and systems design