On the Experimental Evaluation of Vehicular Networks: Issues, Requirements and Methodology Applied to a Real Use Case

One of the most challenging fields in vehicular communications has been the experimental assessment of protocols and novel technologies. Researchers usually tend to simulate vehicular scenarios and/or partially validate new contributions in the area by using constrained testbeds and carrying out minor tests. In this line, the present work reviews the issues that pioneers in the area of vehicular communications and, in general, in telematics, have to deal with if they want to perform a good evaluation campaign by real testing. The key needs for a good experimental evaluation is the use of proper software tools for gathering testing data, post-processing and generating relevant figures of merit and, finally, properly showing the most important results. For this reason, a key contribution of this paper is the presentation of an evaluation environment called AnaVANET, which covers the previous needs. By using this tool and presenting a reference case of study, a generic testing methodology is described and applied. This way, the usage of the IPv6 protocol over a vehicle-to-vehicle routing protocol, and supporting IETF-based network mobility, is tested at the same time the main features of the AnaVANET system are presented. This work contributes in laying the foundations for a proper experimental evaluation of vehicular networks and will be useful for many researchers in the area.Comment: in EAI Endorsed Transactions on Industrial Networks and Intelligent Systems, 201

AnaVANET: an experiment and visualization tool for vehicular networks

International audienceThe experimental evaluation of wireless and mobile networks is a challenge that rarely substitutes simulation in research works. This statement is even more evident in vehicular communications, due to the equipment and effort needed to obtain significant and realistic results. In this paper, key issues in vehicular experimental evaluation are analyzed by an evaluation tool called AnaVANET, especially designed for assessing the performance of vehicular networks. This software processes the output of well-known testing tools such as ping or iperf, together with navigation information, to generate geo-aware performance figures of merit both in numeric and graphical forms. Its main analysis capabilities are used to validate the good performance in terms of delay, packet delivery ratio and throughput of NEMO, when using a road-side segment based on IPv6 GeoNetworking

Efficient mobility and multihoming support for mountain rescue

Introducing an IP-based communication system into the mountain rescue domain would enable carrying out search and rescue missions in an effective way. With efficient mobility and multihoming support, a Mountain Rescue Team would be able to establish more effective and reliable Internet communication. In this paper, we present the Multihomed Mobile Network Architecture (MMNA), a comprehensive multihomed mobility solution for complex nested mobility scenarios. It provides a multihoming management mechanism for gateway discovery and selection, on top of an efficient multihomed mobility model integrating different mobility and multihoming protocols. The design of the MMNA solution is first presented. We then describe how the MMNA was experimentally implemented and evaluated in a testbed setup to examine its effectiveness and feasibility considering a use case example of a mountain rescue scenario. The results highlight the practicality and advantages of deploying the MMNA into such a critical real-world scenario

Validation and evaluation of NEMO in VANET using geographic routing

International audienceThe combination of geographic-based routing protocols (GeoNetworking) and IPv6 NEtwork MObility (NEMO) into a single communication architecture (IPv6 GeoNetworking) is key in Vehicular Ad-hoc Networks (VANET). While NEMO manages Internet access and session continuity between the vehicle and the Internet, geographically based data forwarding allows an efficient dissemination of the information between vehicles and the infrastructure. In this paper, we refer to the basic scenarios that led to the design of the IPv6 GeoNetworking architecture in the context of the GeoNet project. A prototype implementation of the modules that couple these two technologies is described, in particular the adaptation of IPv6 and C2CNet, a layer that ensures the geographic capabilities. Results of a light experimental performance evaluation are reported

The Role of communication and network technologies in vehicular applications

International audienceVehicular networks attract a lot of attention in the research world. Novel vehicular applications need a suitable communication channel in order to extend in-vehicle capabilities and, be aware about surrounding events. However, these networks present some proprieties, such as high mobility or specific topologies. These properties affect the performances of applications and more effort should be directed to identify the final necessities of the network. Few works deal with application requirements which should be considered when vehicular services are designed. In this chapter this gap is filled, proposing an analysis of application requirements which considers available technologies for physical/MAC and network layers. This study contains key factors which must be taken into account not only at the designing stage of the vehicular network, but also when applications are evaluated

Simultaneous Usage of NEMO and MANET for Vehicular Communication

International audienceMobile Adhoc Network (MANET) routing protocol and NEMO basic support protocol are considered key technologies for vehicle networks. Cooperation between MANET and NEMO (MANEMO) brings several benefits especially for route optimization and multihoming. We setup a real-field testbed on the ANEMONE testbed. In our system, a mobile router has 3 egress interfaces, which is 3G and Wifi to connect the Internet, and other Wifi to connect to Optimized link State Routeing (OLSR) network. All of these interfaces are utilized simultaneously for Inter-vehicle communication. The experimentation results show that MANEMO allows to improve the overall network performance in term of bandwidth and delay

On the design of efficient Vehicular Applications

International audienceVehicular communications attract the attention of many people in the networking research world. These networks present some special features, such as high mobility or specific topologies, which affect the performance of applications. In order to select the appropriate technologies, more effort should be directed to identify the final necessities of the network. Few works identify possible applications of vehicular networks, but none of them link application requirements which networking technologies available in the vehicular field. In this paper, we fill this gap, and propose an analysis of application requirements and study how to deal with them using communication technologies for the physical and network level. This study contains key factors which must be taken into account, especially, at the designing stage of the vehicular network

Quality of service and security in future mobile technologies

Future networks will comprise a wide variety of wireless networks. Users will expect to be always connected from any location, and, as users move, connections will be switched to available networks using vertical handover techniques. The current approach of the operators is a centralized network, and the mobility management is done at the infrastructure level. The decentralized mobility management is another approach developed in many researches, however, not widely deployed. We are interested in this type of decentralized mobility management, especially in a highly dynamic environment when the network topology changes frequently. We choose a particular case study, Vehicular Ad-hoc Networks (VANETs), which are a new emerging network technology derived from ad-hoc networks and are an example of future networks. In the field of Intelligent Transportation Systems (ITS), communications without a wire between vehicles (V2V) appear as an accident prevention solution offering a wider vision than conventional sensors. By linking vehicles to telecommunications network (V2I), new perspectives are offered both passengers and driver with conventional communication applications such as access Internet, e-learning, games or chat. This means that future mobile networks like VANETs will have to integrate communications, mobility, Quality of Service (QoS) and security. We mainly interested in three issues: mobility, QoS and security. These three issues are intrinsic to vehicles on motorway networks. We need to simultaneously manage QoS and security while taking into account users mobility. In this thesis, we propose to contribute on how to improve security without degrading the quality of service QoS in a highly mobile environment as VANETs networks. To answer this research question, we use simulations and experiments. Simulation using Network Simulator 2 (NS2) will be used to show that security schemes have significant impacts on the throughput QoS, and our proposed schemes can substantially improve the effective secure throughput with cooperative communications